Can't search on connected Windows servers in OSX 10.5.6

Ever since I switched to Leopard, I can no longer search for files on our servers. In Tiger there was an option for "Others" and I could select the server there. Anyone know how?
Thanks GJS

I have the same problem here. Lost functions on my psc 1300 series. I finally found the original install cd for the printer and ran it. The HP DIRECTOR All in One now functions.
I do not know if I should be removing any old drivers or not?
Now I have discovered that my hp laserjet 2100 will not work. Window says software is missing. What to do now is a mystery. I went to apple a looked at operating system sw update and I see that they have just added HP printer driver update. I downloaded the new drivers and still cannot get the 2100 (my main printer ) to work. All this happened since the 10.5.6 upgrade.
Sure could use some help here.
Thanks ...Bill

Similar Messages

Can we Monitor third party Windows servers through Cisco Prime

Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishna

Seems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Mac can't search on a Windows 2003 server

We are using a Mac G5 running OSX (10.3.9) and are not able to search for files on our Windows 2003 server. We also can't index the server from this Mac.
The Macs and the Window server are fully up to date.
We are using AFP for the network connection. (We need to use AFP to maintain the Apple File Links.)
Our Windows PC can search files on the server with no problems.
Please help! Any advice is appreciated!!

Same here. I'm seeing the same error.
When I look at my Windows share, I see that Pages is trying to create a folder with several subfolders: Data and Metadata, plus index.zip, preview-micro.jpg, preview-web.jpg, and preview.jpg files.
I don't think this is a Mavericks issue, although I upgraded to Mavericks and Pages 5.0 at the same time. I still have the older version of Pages. It works just fine.

Can't establish VPN on windows client to OSX server

Hi everyone,
I'm stuck for a while now with a very annoying problem.
I can't establish a VPN connection on a windows client to a OSX Server. It worked fine while we had OSX server 10.6.
We recently updated to 10.8 and got this problem.
I know some of u are now thinking, the solution is: Just don't use windows... But the director of the company i am doing this for
doesn't want to switch to mac.
Also, this problem maybe be related to windows but i hope someone here can help me.
Things i've done:
I've tried PPTP ( didn't work either )
I've tried different users
I've tried adding a rule te regedit in windows ( according to a windows vista kb file for VPN trough NAT devices )
I've tried different authentication rules
In VPN log is Server admin everything goes well until:
pppd[87435]: fatal signal 6
vpnd[104]: --> Client with address 192.168.0.24 has hungup
after this it goes further with some successes.
I hope someone here knows the solution!
Thanks in advance,
Remy
Mac mini server, 10.8.5
server admin 2
( client ) windows 7 & 8
ps. sorry for my bad grammer, i'm dutch..

You could have a look at the following and see if it helps.
http://support.apple.com/kb/HT5078

How can I automatically unmount my Windows partition in OSX?

Hey guys,
I have been having general performance slow down while in OSX since I (partitioned and) installed Windows 7 (onto the iMac below).
A couple of times, when I have been using OSX, I have found that if I unmount the Win 7 partition, then OSX will run faster and better.
Is there any way that I can automatically unmount the partition on startup/login? I do not mind if it is a script or something else I need to do/use, as the performance is becoming rather frustrating.
Thanks, Lib.

Hi,
have a look at the answers in this thread http://discussions.apple.com/thread.jspa?threadID=1984633&tstart=0
For starters, it might be sufficient to boot into WIndows a rename the Windows partition using the WIndows Explorer to something starting with a dot (e.g. .Windows).
OSX usually ignores partitions that start with a dot.
Regards
Stefan

Can't get wifi connection after installing lion osx

I upgraded my OSX to Lion, and ever since i am unable to pull a connection to my wifi, neither at home nor at work. I have tried almost everything... I even reinstalled all of my software and NADA..... And needless to say it took me the whole saturday to do it, since it is recommended to start with the Discs that originally came with the computer..
I´m on the verge of hating my computer!!!
PLEASE HELP....

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Can't Mount Windows Partition in OSX After Upgrading to 10.5 and BC 2.0

I just installed Leopard today, using the upgrade option (as opposed to a clean install). I was happy to see that I could boot into Windows still, and installed all of the Boot Camp 2.0 drivers while booted into Vista. However, I can no longer mount my Windows partition in OSX. While using Tiger, I did use MacFuse and ntfs-3g to get read-write support, but in Leopard, I can't even read. When I try to mount the Windows volume in Disk Utility, I get an error stating that it cannot be mounted. I also do not have the option to perform "First Aid" or "Repair" on the volume.
I realize that the latest version of ntfs-3g isn't proven to work with Leopard, but I would at least like read access in OSX. Is it possible that some settings were left over from my Tiger configuration that would not allow Leopard to mount the partition? Any ideas?
Thank you.

Ok. I'm in the club with the same problem...
Strange things:
* For the first days after Leopard's install, my BootCamp disk0s3 partition (I'll name it "BillGates") was mounted correctly. Then, after a few days (but BEFORE upgrading to 10.5.1), it disappeared.
* If I launch DiskUtility "BillGates" is shown, but (in the right device navigation bar) it's named "-n BillGates". If I click the Erase menu, it's named "-nBillGates" (without the space between "-n" and "BillGates"). If I launch SystemProfiler it's named "-n BillGates", but the mount point is "/Volumes/billgates". Can't understand where this "-n" thing is coming from!
* If I try to mount "-n BillGates" from DiskUtility it doesn't work and the log says "Mount of -n BillGates failed".
* In the FSTAB there were no instructions: it was empty.
Now, I tried the MacFUSE-solution: no results (meaning BillGates was not mounted on startup).
I tried the modify-the-FSTAB-solution: no results (with "BillGates", "-n BillGates" nor "-nBillGates".
I tried the chkdsk-solution: all tests were ok, but nothing happened.
The only trick that worked was mounting the partition with Terminal's commands (thanks rtracy!!). It made appear "BillGates" on the desktop (without the "-n thing", that is still present in DiskUtility).
Problem is at the first reboot, the Boot Camp partition disappears again. Any ideas for a permanent fix?!
Giangiacomo.
ADDENDUM: I've tried to move a file from desktop to an unlocked folder in BillGates and System did not copy them. "The item could not be moved because "BillGates" cannot be modified" !!!!!!!!
Message was edited by: Giangiacomo Castelfranchi1

Why can´t i connect to Windows servers after installing Lion?

Why can´t i connect to Windows servers after installing Lion?

Me too!
MacBook Pro 15" 2011, OS X Lion 10.7

Can't search servers anymore

I recently upgraded to Lion. I can no longer search on the servers I connect to. I used to be able to do this on Leopard and Snow Leopard.
The servers are Windows servers and they are virtual servers.

I recently upgraded to Lion. I can no longer search on the servers I connect to. I used to be able to do this on Leopard and Snow Leopard.
The servers are Windows servers and they are virtual servers.

I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

I can make a WiFi connection but pages will not load. WiFi works ok on a laptop using Windows. I have reset the WiFi settings but this makes no difference.

Thanks, Linc, but that almost helped:
Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
Any ideas about the dropped network?

Windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

Can't connect to servers in enemy-territory

Hi, i installed et and i can't connect to servers, when i search for servers i see only 20 servers and if i try to connect
it just stucks at "Awaiting gamestat"

One big clue is that Safari uses DNS & Proxy settings from the Network CP/System settings, while Firefox uses it's own settings.
Might try making a new Admin User to try as a test.
Searching for which file(s) hold those at the moment, though right now I'd try dragging these files to the Desktop & reboot, resetup Networking...
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
And, since it's a secure connection, might look for some of these files...
~/Library/Preferences/ByHost/com.apple.networkConnect.<ethernet MAC address>.plist
Looks like the Proxies are stored in...
/Library/Preferences/SystemConfiguration/preferences.plist
But that doesn't ensure that it's the only place on your machine.

How can I disable remote access connection window ?

When I try to connect (via TCP/IP) with a VI in another PC (in my local network) it appears the remote access connection window.
How can I disable this (programmatically if possible) ?
A big thanks for your answers.
Linus

Randy,
attached the image of the Remote Access Connection Window that appears when I connect to the VI.
It is the Operating System (Windows) classical panel for Remote Access connections using a modem.
Many thanks.
Linus
Attachments:
Remote_Access.jpg ‏22 KB

How can I let the Applications can be found out in "Settings" feild of Search box in Windows 8 and later.

As we know, there are several feild in Search box since Windows 8.
About my program: It is an EXE item for PC settings, and I have add it to Control Panel. It can be find out in the Search box of Control Panel. But I can not find it in Search box in the Start Menu of Windows 10 OR the one in the METRO UI of
Windows 8/8.1. What should I do for this? I want to let it can be find out in the "Settings" Feild of Search.
At begining I think as soon as I let it support the Search Box in Control Panel page, then it must can be find out in StartMenu or Metro UI. Because I have seen the original Control Panel items(Contained by Microsoft Windows OS) can support StartMenu
or Metro UI Search("Settings" Feild). and the descriptions in the search result are the same as those result in Control panel Search Page. So I guess they may share some configrations, such as the tasklink file?
Below shows the same descriptions between Control Panel Search results and Metro UI Search result:
MS Community Message

'''about:config'''
Firefox runs in one process regardless of how many tabs or windows are open; always been that way. Firefox 3.6.4 and newer run some plugins in its' own process. <br />
http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

Can't search on connected Windows servers in OSX 10.5.6

Similar Messages

Maybe you are looking for