Can't See 9600M Information in System Profiler

Hello,
I have a 15" 2.53 MBP bought refurbished in 2009. I was looking through my System Profiler today and realized I can only see the 9400M in the Graphics/Display section, the 9600 isn't anywhere to be found.
I have the option to switch to "Performance Mode" in the energy saver preferences and I'm pretty sure I remember seeing information about the 9600M (been a while since I looked) in the system profiler before. Has anyone run into this before?
Thank you for your time

Guess you have the same problem as ddlalledo and me (as described in http://discussions.apple.com/thread.jspa?threadID=2505258 and http://discussions.apple.com/thread.jspa?threadID=2488505 ).
Did you received any kernel panic since downgrading to 10.6? Mine don't appear until I upgrade from 1.6.2 to a newer version.
I completely wiped out my system and reinstalled the OS to see if it would be a third party vulnerability, but the error also occurs with default Apple software.
So I'm convinced that it must be a Apple software bug, because my machine runs great on < 10.6.3.
Not long ago I upgraded to 10.6.6 in the hope Apple have fixed it, but unfortunately the KP reappeared after clicking 'Shut Down...' from the apple menu. And again I'm keep sending rapports almost daily to Apple...
When I downgraded my system from 10.6.4 to 10.6.2 the energy saver preferences didn't listed the high-performance NVIDIA GeForce 9600M GT graphics card, only the 9600M. But this was only then. When I downgraded from 10.6.0 to 10.6.2 it was back listed again.

Similar Messages

How can i see Log information of Report Run Time?

Hi Gurus,
How can i see Log information of Report Run Time?, till now i am counted report run time manually. Is there any way i can see the workbook running time in log information?.
Thanks & Regards
Vikram

There could be a few things -
At one time, you needed to run a separate script to create the tables. I'm not sure that is still the case. If you check the Administrators guide, look into the chapter that deals with the EUL Status Workbooks.
If you are not logged on as the eul owner, you may not have select privileges, or you may need to qualify the table with the schema (if there is no synonym) - select * from <eul_owner>.EUL5_QPP_STATS;
If you are on 4i, the table is EUL4_QPP_STATS

How can I see the information about a file used in a sequence?

How can I see the information about a file used in a sequence?

You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/

Can't see a nikon d800 camera profile in adobe camera raw 8.2

Hello,
I can't see a nikon d800 camera profile in adobe camera raw 8.2
When I open a NEF file from D800, I can see in upper left corner "Camera Raw 8.2 - Nikon D800", but when I open "camera calibration" and click "camera profile", I can only see "Adobe standard, camera landscape, camera neutral, camera vivid" etc., but there is no "Nikon d800 profie
I copied .dpx files with that profile to: C:\Users\User\AppData\Roaming\Adobe\CameraRaw\CameraProfiles ,but nothing happened.
Strange thing is that when I open a NEF file from old Nikon D80, in "camera profile" appears: "camera D2X mode1", "camera D2X mode2", "camera D2X mode3". Any ideas?

The profiles that you see listed are the profiles for the camera that took the photo. You will not see the camera model listed. Those are the profiles Adobe created for the camera that took the image. You cannot change profiles to those of a different camera.
Apparently older Nikon cameras had the profiles you see listed for your D80. I have those same profiles of as part of my D90 choices. But, again apparently, those profiles are not part of newer cameras. I wouldn't know, because I'm still using a D90.

HT4759 i can not see my icloud in system preferences

i can not see my icloud in system preferences

You must be running Lion inorder to get the iCloud preference pane:
Minimum operating system requirements
You may also use iCloud with the following operating system versions:
iPhone, iPad, iPod touch
iOS 5*
Mac
OS X Lion v10.7.5 or later*
PC
Microsoft Windows Vista (Service Pack 2)
* Note: Although you can use iOS 5 and OS X Lion as noted above, you will not be able to take advantage of some iCloud features, such as Shared Photo Streams, iCloud Tabs, Find My iPhone Lost Mode, Documents in the Cloud for iWork, and Find My Friends location-based alerts.
The above is from this Apple document: iCloud: System requirements
OT

How can I see the information at the bottom of any window

In the finder, how can I see the information at the bottom of any window (number of files etc..), like before Lion?

In finder, show status bar. It's under View.

PowerBook G4 does not see optical drive in System Profiler

I have a very strange situation in a powerbook G4 (1.67ghz, hi-res 15" screen).
I bought the laptop non-working, installed a new power board (plug on old one was fried!) Installed a 250gb HD which I had installed OSX on in another G4 laptop, and it booted up fine, or so I thought.
When I put in my Leopard install DVD to install over the existing 10.4 Tiger, the disc spun up, but would not mount - would not eject - and when I checked the System Profiler the superdrive was not recognized by the powerbook as being present on the ATA bus. The hard drive, of course, was seen on the ATA bus.
I thought the superdrive was bum, so I installed a known-working combo drive I had around from a previously parted laptop (Apple branded) and experienced EXACTLY the same situation.
Other things I have tried included using jumpers to manually set the hard drive to slave and cable select (from the factory, with no jumpers, it is set to master), thinking that perhaps the optical drive was somehow seen as master or cable select. All possible jumper settings I tried made no difference.
Booting from external firewire hard drive shows exactly the same situation on the ATA bus, EXCEPT (and this is where it gets just weird enough to pique my curiosity and keep me trying to fix it) - When I boot from the external drive WITHOUT AN INTERNAL DRIVE installed, the SUPERDRIVE SHOWS UP ON THE ATA BUS of the System Profiler! I have not yet seen both at the same time, but I can get one or the other to show, depending on, apparently, the presence of the internal hard drive.
Am I missing something here, or am I to assume a fault in the IDE controller of the logic board?
I have never seen this laptop working properly, but the seller I acquired it from stated that the optical drive worked fine until he fried the DC in-board, presumably with a faulty power supply. He had removed his hard drive to save the data on it.
Thanks for any help or clues that anyone might provide.
See another post with similar situation (archived, or I would have jumped on that thread):
http://discussions.apple.com/thread.jspa?threadID=1862129&tstart=0
Ray

Well, I am happy to report that the situation is resolved with my powerbook not seeing the superdrive, but I still do not really understand exactly why it was unavailable in the system profiler as I originally posted.
My particular solution was to wipe out (erase) the hard drive, zapped PMU, zapped PRAM, did the reset-nvram in open firmware, rechecked to make CERTAIN the proper cables were installed properly, and Now I just completed a fresh install of Leopard from the previously recalcitrant superdrive, to the now-clean hard drive.
My BEST GUESS as to what was wrong with the situation from the outset may have had something to do with where the hard drive came from and how that operating system was installed. (the OS was on the HD when I installed it) In hindsight, perhaps doing all the resets, as well as repairing permissions MIGHT have done it, but I got caught up in thinking it might be cables or something.
So, I would advise others with a similar problem to:
repair the hard drive
repair permissions on the hard drive
reset PMU
reset PRAM
boot to open firmware (hold command-option-o-f at boot) and type "reset-nvram" (without quotes) enter, the type "set-default" enter, then type "reset-all" enter
cross your fingers, knock on wood, and boot! See what happens....
if no glory, THEN look at cables (make certain they are the CORRECT cables and that they are seated properly) I bought a hard drive cable and an optical cable from ebay sellers with assurance that they were the proper cables, and NEITHER had the same part number as the original cable which I suspected faulty, and that in the end are actually GOOD! GO BY PART NUMBERS! do not accept someone elses assurance that their cable is the proper one!
then suspect faulty optical drive - if possible swap another drive in and check.
if a second optical fails, then SUSPECT logicboard, but before you invest in a new logic board ($$$$$) try putting a freshly erased HD in and just see if that helps.
good luck to you all with your mac troubleshooting!
and thanks to all who read and pondered....
I will mark this case "answered" though it is more closed than truly answered.
I am very relieved that the fault did not lie in any of the major components (or even the minor ones for that matter)
It turned out to be only software/installation/settings, even though the symptoms certainly seemed to point to a hardware issue. It pays to try the resets and repairs!
Ray

Can´t see warrenty information in Lenovo Solution Center

Hello
I try to post my issue here because I can´t find a place for the Lenovo IdeaPad g series laptops in the Lenovo forum.
I have installed the latest version of Lenovo Solution Center but when I go to Support and Warranty it just say Not available at enddate and type.
I don´t know whats wrong. If I go to lenovo.com - Support - Warrenty and Services - Check warrenty status - then I use my serial number and machine type and click Submit and then I can see my startdate and enddate with no problem.
The problem is I can´t see my warrenty information in Lenovo Solution Center.

Hi LVT1989,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the exact warranty information is not displayed in your computer, below is the link with the information for what this issue has occurred.
Lenovo Solution Center is not displaying - System Warranty information
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Firewire devices not showing up - No firewire information in System Profile

I have 3 external HD's, and an M-Audio Firewire interface connected to my dual 2.5 G5 - 10.4.6.
None of my drives are showing up on my desktop, and my interface is not showing up in my audio settings. In addition, the FIREWIRE secion of the system profiler has no information in it at all... it simply says "FireWire Bus:"
I ran a hardware diagnostic, and everything passed both the quick test and the full test.
I have tried numerous firewire cables, and all of my ports (FW 400 and 800)
I am very alarmed by this, I have zapped PRAM and repaired all permissions in Disk Utility.
please, any help would be greatly appreciated.
thanks in advance,
john

Thought you could use this info about getting FireWire to work! (some you have tried!)
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.6 Combo update ( PPC, not for Intel systems). Others reading, download the Combo that applies to your system.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work
Cheers!
DALE

HT204387 Can I have version information of each profile?

I would like to know more detail information of iOS6 profiles including veresion information.

The KB article you linked from is the information Apple provides.

I somehow am in full screen, which means I can't see any information at the top of the screen. How do I get back?

I don't know what other information you need. I have no Firefox or tabs or any other toolbar at the top of my screen. I don't even have a way to sign off the internet. I want to get my home screen back, or any other that will allow me to operate.

You can toggle Full Screen Mode on and off by tapping the F11 key. You can also move your cursor to the top of your screen, toolbars will slide down, right-click in the blank area at the end of the Tab bar, choose "Exit Full Screen Mode".
*See --> http://kb.mozillazine.org/Netbooks#Full_screen
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]

Can't see i cloud in system preferance

For some reason - I have I Cloud on my Iphone and it sync. up with my Mac OS X 10.6.8 but in the system preferances, I cant see icould but ME.
Does any one have any experience? I baught this mac in 2010
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.53f13
DO I HAVE TO BUY THIS LEOPARD SOFTWARE?

Agree - I dont use Mobile Me. After the change to iCloud, I noticed that it was on in my Preferances and then it just went. So I guess, I will have to buy this and update my system - Do you know how I can update my system to haev this I Cloud? Thank you for your support

I'm trying to import contacts to outlook 2011 from a cvs file. I've followed all the steps, mapped the fields, clicked import -- it shows that it imported my 900 contacts --- but the contact field remains blank and I can't see any information. Help?

I'm trying to import contacts to outlook 2011 from a cvs file. I've followed all the steps, mapped the fields, etc. It appears to import all 900 contacts, but after finishing nothing appears in my contact list. Any ideas on why this is not working?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I can only see additional information listed in contacts, such as information entered in the title section of the contact when i hit edit.

i am using IOS7. Prior to IOS7, i was able to see all the information i included in my contacts such as the membership number of Enterprise car rental. After loading IOS7, i pulled up the Enterprise contact and didn't see the membership number. Only after i hit edit to put the number in the Title section was i able to see that the membership number was already present in the Title section; it just doesn't show up when the contact is pulled up. I have noticed this same issue with other contacts such as my airline membership contacts. Has anyone experienced this problem and how did you fix it?

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Where can I see the output of System.out.println for iWS 4.1 on NT

I hope these two kb articles would help you to see the answer.
http://knowledgebase.iplanet.com/ikb/kb/articles/4790.html
http://knowledgebase.iplanet.com/ikb/kb/articles/4235.html

Can't See 9600M Information in System Profiler

Similar Messages

Maybe you are looking for