Can't see ability to mark a discussion topic as "watch"

Been away for a couple of weeks. I can't see any longer the icon of a binoculars allowing me to watch a topic so that I get replies sent to me by email. Where is it please? Has that been removed or am I going blind?

Apple must have pulled the facility to reduce traffic.
BTW, "swamped" is not a good word to use in my presence at the moment. The ground floor of my house was flooded with muddy water a week ago last Monday to over one metre during one day of floods in the UK described by the meteorological Office as "once in 100 years". 27,000 people affected, many forced out of their homes flooded to first floor level, and still out. Shopping centres closed, major bridges washed away, 25% of the UK's green pea crop ruined, etc. etc.
All furniture removed, ground floor pressure hosed to that height and drying equipment arriving today. However, we will get from the insurance two new three-piece suites, new carpet, five new kitchen appliances (freezer, washing machine etc.) and lots more. So quite good really!! On the bright side, a flood is not as bad as those fires round Sydney.

Similar Messages

  • Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    It looks like ocz is aware of the issue and trying to address it via firmware:
    http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
    It's a shame because apple is clearly the party that changed something.

  • HT201250 Hi, how do I restore my email from Time Machine, I use Apple Mail, I can't see a folder marked "email" Thanks

    Hi, How do i restore my email when it has been backed up in a time capsule, I can see files for photos, documents etc etc, but nothing that says email. i use Mavericks and Apple Mail
    Thanks - fist time using this so forgive me if I havent given enough info

    The simpliest way to restore Apple Mail emails is to make sure that Apple Mail is the active application running on your OS X Desktop. Then click the Time Machine icon on the OS X menu bar, and then, select the "Enter Time Machine" option. Time Machine should open with a number of Apple Mail windows with copies of your email messages over time.

  • I can't see my taskbar anymore in fullscreen mode while watching flash videos. how do I fix this?

    I used to be able to see my taskbar while watching flash videos full screen. now I can't. I end up missing messages and worse yet, the low battery warning on screen and my computer shuts down. I have firefox 24.0.

    Hi, I don't know how much help this screenshot is going to be but here goes. I used to be able to play flash videos full screen and see my taskbar on the bottom. Last week I think (not really sure, since it updates itself) there was a flash update. After the update, when I make the videos fullscreen, my taskbar disappears. Now I have to come out of fullscreen and check for the battery life and messages constantly. There's no "on top" setting for the taskbar in windows 7 but it is set to lock.

  • Where can i see whne a movie will be available for watching on apple tv?, where can i see whne a movie will be available for watching on apple tv?

    why is it that some films although released are not enlisted in the films in apple tv!?

    If Apple doesn't have permission from the copyright holder to make a given movie available, it won't be. Nobody besides Apple knows which movies they're in the process of negotiating for.
    (67710)

  • Can't see edits in InCopy CC

    I'm able to open InCopy CC, but can't see edits/marks or other user's edits/marks.

    You can only see tracked changes (marked edits) if all four of these things are true: 1) someone checked out the story and enabled track changes; 2) someone made some edits while tracked changes was on, 3) you do not have "Hide Changes" checked in the View menu (it is not checked by default), and 4) you are in either Story or Galley view, since tracked changes are always hidden in Layout view.
    Can you check these 4 things and see if it helps at all?
    AM

  • Getting a link to the discussion topics in collaboration

    Hi All
    I configured discussion forums in collaboration. Whenever I create a room, I was able to locate a folder by the room name in KM repository.
    Can anybody let me know where the discussion topics and posts gets stored? I couldn't locate it. I am working in SPS19.
    Basically, I want to get a link to a discussion topic outside of the discussion iview? Is this possible?
    Regards,
    Yoga

    Hi Senthil,
    Thanks for your reply.
    I could see all the rooms, discussion topics under "collaboration" folder. What configuration changes to be done if I want to change the location/KM folder to store the discussion topics? I could see a parameter named "Path..." in discussion iview which is having /documents/discussions as default value. Is this the one which is controlling this configuration. I tried changing this and preview the iview. I am getting access denied error.
    Regards,
    Yoga

  • The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

    The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet.  I have charts and other stuff related the the original table so I need to figure out why I can only see from column C  forward.  I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

    I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

  • Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I have just downloaded itunes 10.6 and  in the process my "podcast" option under library has disappeared! The files are still on my laptop. I can also see some of my recorded music in my itunes library but can play them - there is an exclamation mark next

    I have just downloaded itunes 10.6 and in the process my "podcast" option under library has disappeared! THe files are still on my laptop. I can also see some of my recorded music in the itunes library but can't play them - there is an exclamation mark next to each track. Basically I can't use itunes - is the only option remove and replace? Thanks in advance

    Visibility of the Podcasts section is controlled from within the Edit > Preferences dialog.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    Missing tracks
    Typically this can happen because a file or folder is accidentally shunted to the wrong location. iTunes can also get confused if it expects to be talking to an external drive which isn't there. If will often reset the default media folder location and may have trouble finding files in the old folders.
    Select one of your tracks that is missing in action. Press CTRL-I to Get Info. Cancel when asked to try to locate the file, then look at the location given on the summary tab. This where iTunes thinks the file ought to be? Now find out where it actually is. Post back the two locations for comparison. I should be able to give you some steps to reconnect everything once I can determine which of the things that might have gone wrong is most likely in your case.
    When you get it all working make a backup!
    tt2

  • We can't see details of own appointments marked as private in Scheduling Assistant.

    We have found that when you mark an appointment as private and then go into the scheduling assistant it appears as a private appointment.
    We can't see the deatails of our own appointments to compare with other people we want to attend meetings.
    Has anyone come across this issue before?
    Any and all help is much appreciated.

    We have found that when you mark an appointment as private and then go into the scheduling assistant it appears as a private appointment.
    We can't see the deatails of our own appointments to compare with other people we want to attend meetings.
    Has anyone come across this issue before?
    Any and all help is much appreciated.
    Update: This is for Outlook 2010.
    Hi, has anyone come across this issue before or know anyone who has?
    Thank you.

  • Hello, I have this red mark/smudge that you can only see in a dark background?

    Hello I have this red mark/smudge on my macbook pro. You can only see it when there is a dark background and it's right in the middle. I included a picture as well, please ignore the reflection of my hand on the screen. It is the red mark in the middle. I don't know what's causing this or what it is, please help.

    Hi, did you end up knowing what it was because I have the same exact problem... and the smudge have the same exact shape
    Thank you

  • Help. I downloaded the OS lion. Then I imported some photos with the "iPhoto". But I see only the photos in the "last import" but I can not see in the library or photos of events, although they are marked as a number.

    Help. I downloaded the OS lion. Then I imported some photos with the "iPhoto". But I see only the photos in the "last import" but I can not see in the library or photos of events, although they are marked as a number.

    bioetico wrote:
    I understand the problem, why is the date before which the photos.
    LN

  • IMac woke up by itself with clicking pattern. Folder with ? mark now. Can't see HD in Diagnostics. Dead HD?

    Hi,
    My iMac was asleep all night, but it woke up suddenly by doing a 6-click pattern. 6 clicks, then the sound of something whirling/winding down, silence, then 6 clicks again, sound of something whirling down, repeat.
    Last month I suddenly heard my iMac making weird clicks whenever it woke up from sleep. I posted about the problem here. It would take longer than usual to fully wake up, and as it was doing so it'd make lots of clicking sounds before I could use it. Did Diagnostics; Repair Disk said my HD was fine.
    I think the problem stems from someone borrowing my computer and using up lots of RAM (tons of programs open), which of course slowed down the computer, so his solution was to just hold down the power button to restart (found out he was too impatient to restart the computer the right way ). I don't know how many times he did it, but I guess 10 times total? Is this enough to mess up the HD?
    One day the iMac showed the folder with a question mark on it. I put in my Snow Leopard install disc and ran the OS from it. I went into System Preferences and redirected the computer to start up from the HD (it had been blank, for some reason). Then it rebooted from the HD like normal. I started using the iMac again, and the clicking problem became only intermittent. Eventually the clicking went away altogether, so I continued using the computer, hoping the HD was still all right (wishful thinking). I did make disk copies using Carbon Copy in case I was wrong (I also let Time Machine do its thing every single day).
    Today I woke up to the sound of my iMac clicking because it woke up on its own. Again, it was having the old trouble of waking like it did last month. 6 clicks. Wind down. Silence. Repeat. It gave me the grey screen for a few long minutes, then it gave me the folder with the question mark on it. I tried to boot from my Snow Leopard disk, but when I tried to re-direct the boot drive, there was no option for my hard drive at all like last time (just the CD and the network server). I tried entering Diagnostics, but again in the left pane there was NO option for my hard drive like last time, only the CD-ROM with the Snow Leopard CD in it.
    Does that basically mean my HD is dead since I can't "see" it? Should I even bother taking it in to Genius? I'm probably going to be buying a new iMac tomorrow. I just hope my Time Machine and Carbon Copy backups will transfer all my files correctly. I've never had to do this before, so I'm pretty nervous about it.
    Thanks!
    P.S. My iMac is probably 4-5 years old. Purchased refurbished from a non-Apple store. I guess it's just time?

    I put the HD back into my iMac's SATA sled and can view the contents of the drive without a problem, once again. The Disk Utility on the iMac indicates that the S.M.A.R.T. Status for the drive is "Not Supported," but that is probably because it is viewing the drive via USB from the sled.
    If the drive was failing would I really be able to access it from my iMac via the SATA sled so easily?
    At this point I am leaning on taking the whole MBPro, drive and all, into the Genius Bar tomorrow and hopefully getting back a working computer within a week.

  • Can't see old discussions i started before update

    i can't see the old discussions i started in the activity stream. i only see those that i made or replied to after the update to the discussions forum. please help me locate my threads.
    Neerav

    They should be listed on this page (by clicking on your id) : AceNeerav

Maybe you are looking for