Can't see add targets and devices in project explorer

Hello!
i think I have a strange query. i have Labview 2010 evaluation version. i am trying to add my cRIO 9004 to a project. I am just trying to follow the instructions in the getting started with cRIO manual. it says, add crio to the project by right clicking root project and selecting NEW>>ADD TARGETS AND DEVICES. The problem is I see the link for NEW but once i click that i dont see a sub-link "add new target or device" appear, INSTEAD i see the dialog box for opening a NEW LABVIEW FILE appear. every where in the forum/knowledgebase/support trouble shooting and getting started articles have mentioned right-click root project>>select NEW>> select add target or device>> , as if it IS SUPPOSED TO APPEAR STANDARD in all new projects! But I dont see it! i dont get what I am missing. The software version i have are below:
on cRio:
NI VISA 5.0
NI RIO 3.0
LV RT 8.6
and it matches with what i have installed on my host computer.
I can communicate with the cRIO device both using MAX and also using ping command in windows command prompt.
Any help would be great!!
Thanks!
Rajesh
Solved!
Go to Solution.

well yes! it didnt strike me though that i had to reinstall my LV addon modules as you had mentioned drivers. anyways thank you!

Similar Messages

La carpeta WSN Gateway no se muestra en Add Targets and Devices

Hola, buenas tardes, estoy haciendo una red de sensores inalámbricos y ya logré la comunicación de la NI-9792 con el servidor y con los nodos. Lo único que me falta es hacer el proyecto en LabVIEW para comenzar a sensar, pero en la ventana de "Add Targets and Devices" no aparece la carpeta WSN Gateway. ¿Cuál podría ser el problema? Anexo imágenes con el ideal y con mi situación.
Attachments:
Ideal.JPG ‏29 KB
MAX.JPG ‏139 KB
Project.JPG ‏157 KB

Hola Archie Flores,
         Lo más probable es que sea un problema de compatibilidad de software. En la siguiente página puedes consultar las versiones que están soportadas para el hardware que estás utilizando, así como para el mismo software. Asimismo, es importante que revises el orden de instalación correcto del software necesario.
http://zone.ni.com/devzone/cda/tut/p/id/12734
         Una vez comprobado esto, puedes utilizar un ejemplo previo para ver si de esta forma puedes utilizar el hardware o te marca algun error. Los ejemplos los puedes obtener de los que se instalan junto con el software de National Instruments o el de la siguiente página.
http://zone.ni.com/devzone/cda/epd/p/id/6480
          Espero que esta información te sirva para resolver tu problema. Si llegas a tener alguna pregunta no dudes en escribirme.
Saludos,
Héctor Rojas

Touch panels not under targets and devices

Hi All,
I've used the NI touch panel module before with Labview 8.6. I now have Labview 2009 and have installed the touch panel module 2009. When I open a project and go to add targets and devices I have no option to expand touch panels as I did in 8.6. The module appears in Max and in my license manager.
Any suggestions to what I can try? I have tried reinstalling the module.
Thanks,
J
Attachments:
targets and devices.JPG ‏19 KB

JChec,
That is strange! If you go to Help»Find Examples... from within LabVIEW you can open up the Example Finder. In the Browse tab of the example finder there are many folders that populate the center column. Two of those folders are "Toolkits and Modules" and "Toolkits and Modules Not Installed." Which folder does the Touch Panel Module show up in? Are you able to open up and run one of the examples? What Operating System are you using?
Message Edited by Ben S on 02-16-2010 11:56 AM
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Can't ad compact fieldpoint to a project. Targets and devices button is missing

Hello,
I am using Labview 8.5 evaluation and a compact fieldfoint. I can see the fieldpoint in measurement and automation explorer and i can see the measured values comming form the different modules, so this works fine i gues.
The problems start when i want to use the fieldpoint. I can't ad it to my project!!. Normally you right click on the project and then you see the buttons new and targets and devices. In my case i can only see the button new, there is no button Targets And Devices. How could i solve this problem??
Greets,
Adrie

Hello Adrie,
Thank you for your forum post. Bad to hear about the problems wit fieldpoint. Can you look which fieldpoint driver you are using? You are able to find this in the Measurement and Automation eXplorer (MAX) under software. Its possible that your version isn't compatible with Labview. Please find the latest driver under this link.
I know that our evaluation software loses functionality after a while, so how long is your trial running at this moment?
Please let me know if the new fieldpoint software doesn't work.
Best regards,
Martijn S
Applications Engineer
NI Netherlands

My Gf has my iphone. How can I see recent messages and calls from another device?

My Gf has my iphone. How can I see recent messages and calls from another device?

Depending on your carrier, you may be able to see recent calls by logging into your account on the carrier's web site, if they offer such a feature, though incoming calls being shown is not usual. There will, as diesel said, be no way to see messages already received, either SMS/MMS or iMessages, without having the phone.
Regards.

New "Targets and Devices..." dialog does not open in Project window

Hi I am trying to add an FPGA device in my project, however when I right click on Project, and go to New -> Targets and Devices...It appears as though it is busy (the mouse icon becomes the hourglass) and after while it just goes back to normal and nothing seems to happen. I have an FPGA device installed which is the RIO card PXI-7831R, and the devices seems to be working fine. When opening a project that already contains it as a device, it is displayed fine. Its just the dialog to add new devices and targets does not appear. I have tried Repairing NI Labview 8.0 and NI Labview FPGA Module, but the problem still exists. I would appreciate if anyone has any idea as to why this is happening and how to resolve it. Thanks!

Hi Kewsvnet
So you have tried the device on another machine and it works fine, is it only on a specific machine that this issue is occuring on? I think I misunderstood the issue yesterday, am I right in understanding that when you click on 'New Devices and Targets' absoloutely nothing happens apart from the 'hour-glass' appearing for a while? If this is the case it maybe the case that LabVIEW may have become corrupted in some manner. Repairing it will not solve an issue like this. What you should try is to force LabVIEW to create a new .ini file, which holds all the configuration settings. To do this you need to rename the .ini file so that when LabVIEW starts it will detect no .ini file an create a new one.
The .ini file can be located via C:\Program Files\National Instruments\LabVIEW 8.0\ LabVIEW Configuration Settings (it is a file size in the range of 2Kb - 10Kb)
You need to rename this file 'LabVIEW Backup', then attempt to restart LabVIEW and a new project and try to add a target.
Let me know how you get on
Kindest Regards
YatinM
Applications Engineer
NIUK & Ireland

I can not see my i phone/device on my i tunes?

I can not see my i ohone/device on my I tunes aftre i upgraded to the new verision
all I want to do is add a playlist to my i phone.

Hello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support

Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

HT1689 I updated my phone to the iOS7 and now when i try to use the keyboard, i can't see myself typing and it goes very slowly. I am confused to why this happened. It worked perfectly fine with iOS6. Any suggestions?

I updated my phone to the iOS7 and now when i try to use the keyboard, i can't see myself typing and it goes very slowly. I am confused to why this happened. It worked perfectly fine with iOS6. Any suggestions?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

Can't see review stars and comments of clothing websites

Example #1= "Landsend.com", click "men", click "pants"
http://www.landsend.com/ix/mens-clothing/Men/Mens-Pants/index.html?seq=1~2~3&catNumbers=1~23&visible=1~2~1&cm_re=D-4-8&pageSize=72
Can see pants and pictures, but where the usual 1-5 *s are, it says "Rating". I click on the "Men's Pleat Front Traditional Fit No Iron Dress Twill Trousers" (the first pants picture/option, Item # 426850-A61) and up pops all of the information EXCEPT the photo/s that should be on the left, and the "Views + Reviews" with all of the comments under that.
Example #2= "underarmour.com", "Men", "Accessories", "Backpacks and Bags", "UA Hustle Storm Backpack"
http://www.underarmour.com/shop/us/en//pid1238440-040#bv-reviews
Can see "****1/2* (2) Read All Reviews" but the reviews are missing and when I click on "Read all Reviews", the screen moves down, but nothing else changes and the reviews are not there.
Example #3= "eddiebauer.com", "Men", "Shirts", "Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve"
http://www.eddiebauer.com/EB/Men/Shirts/index.cat
Under "Men's Shirts", I see the stars and how many people have rated it [ex.- *** (17)]. If I click on the ratings/stars or on " Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve", the next page shows up-
http://www.eddiebauer.com/catalog/product.jsp?ensembleId=44679&&categoryId=9&categoryName=SHIRTS&pCategoryId=2&pCategoryName=MEN&gpCategoryId=1&gpCategoryName=EB&catPath=~~categoryId=9~~categoryName=SHIRTS~~pCategoryId=2~~pCategoryName=MEN~~gpCategoryId=1~~gpCategoryName=EB&viewAll=n&pg=1&cmPathInfo=null
...however, the stars, ratings, and comments are not there. The picture/s of the shirt are there, as well as the size, color, add to bag, etc.
On Amazon, I can see the ratings and comments. This tends to be a problem with clothes companies and their customer service has not been able to tell me why I can't see what should be there. Internet Explorer Does show the missing info; I haven't tried Chrome. I want to work with Firefox. Any suggestions?

On the first page, next to the word ratings, I get five sailboats (blue is good, gray is not good). This image is from the external site "landsend.ugc.bazaarvoice.com". Can you see the images if you load them directly? Here's an example: http://landsend.ugc.bazaarvoice.com/2008/2_8/5/rating.gif
When I click through for the pants, the first image that shows on the left is this one: [http://s7.landsend.com/is/image/LandsEnd/426850_AJ13_FF_KHA?fmt=jpeg,rgb&qlt=80,1&op_sharpen=0&resMode=sharp2&op_usm=0.5,1,3,0&icc=sRGB%20IEC61966-2.1,relative&iccEmbed=1&rgn=0,0,2000,3000&scl=5.882352941176471]. If you click it directly, does it work?
If you CANNOT view those images directly, the sites might be blocked. Check out the first section of this article: [[Fix problems that cause images to not show]].
If you CAN view those images directly, but not when embedded on the main Lands End site, you might have blocked "third party" images. You can check that here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''perm''' and pause while the list is filtered
(3) If the value is not 1 (and the line is bold), right-click '''permissions.default.image''' and choose Reset.
If the above fails, it could be an add-on issue. Could you try Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

How can i see my calendar and contacts on my pc?

how can i see my calendar and contacts on my pc after i back it up on itunes

how can i see my calendar and contacts on my pc after i back up MY IPHONE on itunes

How can i view my iphone contents on PC. How can i view my backup data in itunes. How can i see my SMS and contact on PC

Hi,
Can anybody help me out on the follwoing questions
how can i view my iphone contents on PC. How can i view my backup data in itunes. How can i see my SMS and contact on PC

The data isn't actually stored in iTunes. iTunes is like a card catalog that allows you to access information from the various places that it's stored on the computer. SMS and contact info will be viewable in whatever program you sync contact information. The backup actually keeps the files, but doesn't make them viewable, I'm pretty sure. You can only see the info you've actually synced.

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

How can I see the size and colour of text in DW Cs5?

Hi forum, how do you see the size and colour of a piece of text in Dreamweaver Cs5, I have some text in a dreamweaver file which is a size I like and a colour I like and I want to make a CSS rule with these characteristics. How can you see what size and colour a piece of text is?
Many thanks for any help
Gareth

<td height="89" colspan="5" valign="top"><p><font color="#FF0066" size="-1" face="Arial, Helvetica, sans-serif">what is the text size, colour and boldness of this piece of text.</font></p></td>
Above code is deprecated. CS5 will not pick up these styles in the CSS styles panel. Legacy sites are not simple to work with. They need to be converted to modern standards. You do this by stripping the HTML styles from markup and re-writing styles to CSS.
<p>This is a normal paragraph</p>
Put your CSS styles between your document's <head> and </head> tags:
<style type="text/css">
p {
color: #FF0066;
font-size: small;
font-family: Arial, Helvetica, sans-serif;
</style>
Or, create an external stylesheet to which your HTML documents are linked like this:
http://alt-web.com/DEMOS/DW-Link-Stylesheet.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Can i see the name and the nickname at the same time

Can I see the name and the nickname at the same time when Iphone 4 is ringing?
Sometimes i don't remember somebody's name, so i want to see the name and nickname when phone is ringing.

i download an app called call informer on my Android phone, it can display nickname, company name at the same time. i don't know if IOS has similar app.

Can't see add targets and devices in project explorer

Similar Messages

Maybe you are looking for