Can't see AEB or AE when VPNed

I encountered a problem where I can't admin my AEB or use AirTunes on my LAN when I am VPNed in to work. I already had to download and use the old Airport Admin Utility and turn IPv6 config Off just to be able to connect to the devices to admin. I can admin the AEB and use AirTunes just fine when I am not VPNed, but AirTunes totally drops out when I am VPNed.
Is this an issue with my company's VPN policies or is there something I can configure on my side to get both to work simultaneously? The VPN client we use is Cisco AnyConnect, and there are no settings in the thin client UI that I could find.
Thanks in advance!

Is this an issue with my company's VPN policies or is there something I can configure on my side to get both to work simultaneously?
This is most likely with the VPN connection type setting for your VPN client. Some clients provide a number of different connection types. Most typically, "tunneled" or "split-tunnel." With the "tunneled" mode all traffic goes through the VPN, and this sounds like what your Cisco client is defaulted at. Try to see if you have other options in creating your VPN connection to work.

Similar Messages

  • Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes?  I find it frustrating that I see only one at a time now !  Any suggestions please?

    Where can I see the downloads LIST when downloading podcasts,
    like in the older version of iTunes?  I find it frustrating that I see only one
    download at a time now !  Any suggestions please?

    Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
    I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
    My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
    I haven't tried installing the latest beta. Maybe that would fix the problem.
    Toddo

  • How can I see all photo miniatures when I open a photo album or an event in iphoto?

    How can I see all photo miniatures when I open a photo album or an event in iphoto?

    Note the zoom slider at the bottom of th iPhoto Window - drag it left.

  • Hallo. My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help? Thanks

    Hallo.
    My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help?
    Thanks

    Did you also read that same link you provided and see this "With iTunes 10.3 or later and iOS 4.3.3 or later, "?
    Iphone 3G does not support ios 4.3

  • I can't see PDFs in email when using iPad

    I can't see PDFs in email when using iPad

    Can you be a little more specific in describing the issue?

  • Why I can't see the button fuse, when I drag and drop a folder into same name folder

    Why I can't see the button fuse, when I drag and drop a folder into same name folder
    I saw the option only one time, and i reseach in the internet and I find fuse option, but now never saw again.
    And Yes, I drag folders with the same name.

    Ok, Gracias por su pronta respuesta, yo necesito arrastar una carpeta a otra ubicacion con una carpeta del mismo nombre, entiendo que lion te advierte si desea reemplazar el contenido o fusionar (mexclar el contenido)
    como lo dice aqui :
    http://www.cioal.com/2011/06/29/las-cinco-novedades-mas-importantes-de-mac-os-x- lion/
    3. Podrás combinar tus archivos y carpetas. Seguro que alguna vez has perdido algún archivo al combinar carpetas o archivos del mismo nombre pero distinto contenido. Ahora, cuando intentes mover una carpeta a un lugar con otra de idéntico nombre, tu equipo te preguntará si prefieres combinar ambas o cambiar una por otra. Los archivos serán tratados de una manera similar: Cuando coincidan archivos con el mismo nombre, el sistema te preguntará también si quieres mantener ambas copias.
    y en muchas otras paginas que tratan el tema.
    mi problema es que esa opcion no me aparece. solo la opcion de reemplazar (o no reemplazar o detener)
    Lo increible es que alguna vez el mismo dia de hoy si me aperecio la opcion.

  • I have my printer email address, but I can not see my printer listed when I login to hpeprint.c​om

    I have my printer email address, but I can not see my printer listed when I login to hpeprint.com

    I will need some more information in order to assist. What model of printer do you have? Different printers have different features such as the ability to display the printer's ePrint address on the front panel of the printer. The website that the printer can be viewed at is eprintcenter.com. Click on this link here to see the sign in page. Have you signed up and register the printer at this site? Is the email address for the printer one that you have customized? Or is one consisting of what appears to be random letters and numbers? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from

    I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from

    my total library is 680 mb, nowhere close to the 2.08 in the pictures folder. I am obviously messing up.
    Actually you’re not.
    The iPhoto Window reports the size of the library that would result if you exported all the current versions +and nothing else+ to a folder on the desktop.
    The iPhoto Library Folder contains the Original, Modified and thumbnail versions of your pics. It also contains various cache and database files +all of which are necessary+ for the working of the Library.
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    You can run a Library on an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Hi,i have iphone 4S, after updating ios 7, all functions are ok but i can't see my balence because when i dial to balance inquiry ( as *124

    Hi,i have iphone 4S, after updating ios 7, all functions are ok but i can't see my balence because when i dial for  balance inquiry ( as *124#) it does not respond or even say that this number is not in use. How can i sort out this problem?

    Yes lucky me . If all troubleshooting has been done in Resolve iOS update and restore errors and if you have at least taken it into a store where they could try a restore themselves then that would suggest a hardware fault with the iPhone.
    If you are out of warranty then it is correct that they would quote you an out of warranty service fee. From here it would be a matter of trying the steps above and if you have already tried then doing the service when you do have the cash.

  • I downloaded a document dpf, I can not see it and also when I open my iBook is closed immediately. What should I do?

    I downloaded a document dpf, I can not see it and also when I open my iBook is closed immediately. What should I do?

    1. Install the free Adobe Reader app
    2. Open the PDF attachment with Adobe Reader.

  • Hi, I'have selected "Block this ad" when I was in Facebook. Now I can only see an empty page when I try to use my Facebook. Any help in unblocking it? Thanks.

    Hi, I'have selected "Block this ad" when I was in Facebook. Now I can only see an empty page when I try to use my Facebook. Any help in unblocking it? Thanks.

    Apple doesn't have any built-in ad blocking components in teh OS or in Safari...so what ad blocking program or Safari extension are you using?  It should have the ability for you to change its settings.

  • Im missing money how do i get it back? and can i see a reciept of when i redeemed and bought apps?

    lost about 20 dollars or so how can i get it back and can i see the list of when i redeemed itunes cards and when i used that money in the store

    You can look at you purchase history.
    iTunes Store: What to do if your account has been compromised

  • Hi, i can't see anymore the subtitle when i watching a movie on my iPad, somebody can help me with that ?

    hi, i can't see anymore the subtitle when i watching a movie on my iPad, somebody can help me with that ?

    As has been discussed on these forums thousands of times, Adobe does not make a flash player for iphone/ipad/ipod and likely never will.
    You can do a forum search and find countless posts on this.

  • Since software update, can't see contents of iPod when connected to iTunes

    About 2 days ago, when I connected my iPod to my pc (iTunes), it said there were some software updates for my iPod so I downloaded them and the iPod rebooted itself. Once it came back up, my iPod showed up in iTunes under "devices" on the left hand sidebar. I got the registration page - I usually click register later, but nothing happened this time. It didn't bring me into my iPod. So I tried to Register. I could get so far, then it asked if I wanted some free movie or something, I said NO THANKS, CONTINUE, but nothing happened. I wasn't registered AND I couldn't access my iPod. I can see my iPod under My Computer. I can see "sandra's iPod" uder devices in iTunes. BUT, I can't get to the content when connected to iTunes. All of my stuff is there on the iPod. I can play my iPod when it's not connected to iTunes - but I can't see the content, manipulate playlists, delete songs, etc. when connected to iTunes. I am almost positive this is a result of the latest software updates to the iPod. I have not updated iTunes - I didn't want to and compound the problem. I'm not a techy person - so please be gentle! Thank you. Sandra

    Resolved at home.

  • After installing Lion os I cannot see my desktop 1 nor can I see my open windows when I go to finder, I just get the grey/black background that comes with mission control. Any ideas as to how to solve this problem?

    The top picture is what my Desktop 1 looks like. And the picture below is what my desktop looks like after clicking mission control. Ive tried changing wallpapers, changing preferences, etc. and I still can't figure out what's wrong. As you can see, on mission control you can't see any of the open windows, or anything that I have placed on my desktop. Any ideas as to how to solve this issue?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

Maybe you are looking for

  • Connecting MBP with VGA to 32" LCD HDTV?

    What's up everyone, I'm looking at buying the new 15" Macbook Pro and connecting it to my Westinghouse 32" LCD HDTV. My TV does NOT have DVI input, but does have VGA and HDMI. Has the issue with connecting these bad boys been resolved yet? Has anyone

  • Flash Using Browser as Proxy for Requests

    I've been looking without success for documentation that defines the behavior of Flash (and ActiveScript) when submitting an HTTP request. I've read so far (on sites other than Adobe's) that Flash will proxy it's requests through the browser thus pic

  • What does Combo mean in OSX Downloads?

    my question what is the difference between a OS X 10.3.8 and OSX 10.3.8 Combo. Just making sure to pick the right one. thanks

  • How to synchronize two database

    Hi All, I am using oracle 10R2 in solaris 10. I am trying one scenario, but unable to come with solution. please give your suggestion. In machine A, I have one database called DB1 and its up and running. Now I took cold backup and created the same da

  • How to call a function of a system library

    I'd like to check the login ID of the current system user. Therefor I tried via System.loadLibrary("NETWIN32") to load the requested DLL and to call the functions NWDSCreateContext and NWDSWhoAmI. After the funktion call I got the exception java.lang