Can't see airport express in airport utility

Just purchased an airport express to add to my network for the purpose of steaming music wirelessly. The network already has an airport Extreme as the base and four other expresses wired via CAT-5e in an distributed network that is working great. I had one other room that I wanted to stream music without running additional CAT 5e. I cannot get the express to show in airport utility so I can configure it.
Computer: I-mac OS X 10.8.4
airport extreme: bridge mode with 4 expresses underneath in bridge mode
Do have a verizon router above the extreme (FIOS) but the wireless is turned off

Assuming that the AirPort Express is in range of a wireless signal, with the AirPort Express powered on, push and hold the reset button on the back of the device for 7-8 seconds and release.
Allow a full minute for the AirPort Express to restart
Close AirPort Utility if it is open
Click the AirPort icon at the top of the screen on your Mac and wait a few seconds for a listing of New AirPort Base Station to appear
Just below that, click on AirPort Express
AirPort Setup will open automatically and take a minute to analyze the network, then announce that the Express will be configured to extend the network.
Enter a device name that you want to use for the Express, and click Next
AirPort Setup will take another minute to configure things. When you see the message of Setup Complete, click Done.
That's it.
If you want the Expess to "join" the wireless network and not provide any additional wireless coverage......
Open AirPort Utility
Click on the AirPort Express, then click Edit
Click the Wireless tab
Click the Network Mode selection box and choose Join a wireless network
If the setting does not appear, hold down the option key on your Mac while you click on the Network Mode selection box

Similar Messages

HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

Cannot See Airport Express in Airport Utility

I've been browsing the other topics, but don't see one with my exact problems.
I got an Airport Express for Christmas and was able to get it to work on my parents network; but now that I'm at home, I can't get it to even show in the Airport Utility. I've reset the AX by holding down the button for over a second. I've set my Airport Extreme to be extendable and to be n/g compatible.
I've seen advice like making the name and pass match the base station, but I can't even get to a point where I can see it...
Advice?
Thanks,
Chris

I had similar problems and was able to resolve my issue like Simon. I think you need to hard reset your Airport Extreme base station first, then open Airport Utility and reconfigure it using WAP2 encryption. Then hard reset your Airport Express (by the way, you need to unplug it, push the reset button using a paper clip and keep holding it down while plugging it back and wait until it flashes green 4 times, then release) then you should be able to see your airport express in Airport Utility, and reconfigure it to use WAP2 (I used the same password for both base stations) and, at least in my case, voila! all lights turned green and worked. Good Luck,
Ron

Airport Express and Airport Utility won't communicate

Hi,
I have this strange problem that whenever I setup the configurations for my Airport Express in Airport Utility I get an error message saying that the unit and it's network capabilities is temporarily uavailable. I get this message everytime and no matter what changes I whish to make.
Do anyone have any idea about what I should do?

This usually can happen if you have weak signal strength. What happens if the APX and your computer are close to each other?

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage.

Extend Wifi with Airport Express when Airport Extreme is in Bridge Mode

Hello,
I'm trying to make my Wifi network easier at home but Im having some trouble.
My Internet Provider installed a Router at home. So I had to connect my Airport Extreme to the IP Router via cable and setup in Bridge Mode.
In my Airport Extreme I created a Wifi Network called WIFI HOME.
Than I connected two Airport Express into my Airport Extreme via cable and created two new wifi networks: WIFI HOME 2 and WIFI HOME 3.
But, in my opinion, this is not cleaver way to have my Wifi Network setup, since I have to change networks all the time.
The problem is that every time I tried to extend my current WIFI HOME setup into one of the Airport Express, the Airport Express crashes during the setup reset and my network starts to behave wrongly.
I'm starting to think that is something related to the Bridge Mode in my Airport Extreme. but I want to check with you guys if that makes any sense.
Thanks a lot!

Power off both of the AirPort Express devices
Disconnect the Ethernet cables
Wait a minute
Power up one of the AirPort Express devices for a few minutes
Hold in the reset button on the Express for 10 seconds and release
Allow a full minute for the AirPort Express to restart to a slow, blinking amber light
Connect the Ethernet cable to the WAN "O" port on the AirPort Express if it is a two port version
Click the AirPort icon at the top of the Mac's screen
Look for a listing of New AirPort Bsee Station
Click on AirPort Express
The setup utility will open up automatically and take a minute to analyze the network. Then, it will suggest that the Express be configured to Extend the AirPort Extreme network.
Type in a name that you want to call the AirPort Express. Example........Express1
Click Next
Then, the screen message will change to indicate that the AirPort Express is being configured to extend using Ethernet.
When you see the message of Setup Complete, click Done.
The first Express is now set up and working correctly.
Set up the second Express exactly the same way........except give it a different name to avoid confusion.....Example......Express2.

Airport Express or Airport Extreme Base for home wireless

I've read some of the comparisons between the Airport Express and Airport Extreme Base station to make an informed choice before purchasing. The Airport Express probably will suffice for my needs, plus having AirTunes is a bonus. Mobility is not such a concern (most hotels now offer wireless in any case, making the Express less appealing than when it first came out).
But my only concern with Airport Exress is durability and quality. Some postings on the Apple site note that these can go bad after a year or so. I realize that only those having problems are posting but wondered if there might be some issues with the Express that would make the Extreme Base station a better decision, especially since it's only $30 more now.
Thanks in advance.

Actually it really boils down to your needs.
Either one will work and work well, but if air tunes, and portability is important Express is the way to go. The Extreme is a very good choice as well.
I suggest you look over both of these links and decide the features you need.
http://www.apple.com/airportexpress/
http://www.apple.com/airportextreme/
Good Luck
Don

Is it neccessary to buy an AirPort Express or AirPort Extreme for my macbook pro to connect WI FI or wireless?

so I have a macbook pro, but i don't know whether i need to buy an AirPort Express or AirPort Extreme to connect to WI FI or wireless. or i only need to modem??
HELP!!! :'(

Airport Extreme is used by Apple for its wireless routers and the hardware inside your MacBook Pro that is used to connect to a wired or wireless router. http://en.wikipedia.org/wiki/AirPort_Extreme#AirPort_Extreme_Base_Station
While Apple would like you to buy everything from them you can use any brand that will work with Macs. My setup is a Qwest DSL modem connected to a NetGear wireless router. The Airport Extreme card inside my MacBook recognizes them without any problems

I use my ps3 online gaming, is the airport extreme or the airport express be compatible with ps3? Is it going to be a better connection compair to other router? Which one is a better choice for me, airport express or airport extreme??

I bought linksys EA3500 router. Its still in the box and before I open it I want to learn more about the apple airport router, is the apple going to work with my online games with ps3? I have iPad, 2 iPhones, apple tv and Mac mini. If the airport express or airport extreme is a lot better and will work for ps3 which one should I get?

Airport will work with PS3. From what you've stated, the Extreme is more than you need. Buy the Express.

What's the difference between airport express and airport extreme?

airport express and airport extreme? whats the difference??

http://store.apple.com/ca_epp_5000967/product/MC414/airport-express-base-station
http://store.apple.com/ca_epp_5000967/product/MD031AM/A/airport-extreme-base-sta tion

Airport Express and Airport Extreme

Hello,
I am trying to setup a wireless network. What is the difference btw Airport Express and Airport extreme. Do i need both? If yes then why?
Would appreciate a solution from layman's perspective.
Thanks

Hello Indian71. Welcome to the Apple Discussions!
Check out this excellent iFelix table to help show the differences (features-wise) between the AirPort base stations: AirPort base station differences

AirPort Utility can't see either AEBS or AirPort Express using either comp.

I have an AirPort Extreme Base Station (AEBS) and an AirPort Express (APE). The dsl connects to the AEBS via ethernet (in the first slot), and the AEBS connects to the desktop via ethernet (in the second slot; it has no AirPort card). The PowerBook (PB) connects to the network via its AirPort card, and the APE is used to extend the network range.
All of this worked as of last night.
This morning when I woke the PB, it wouldn't connect to the network automatically. I tried to connect manually, but it wouldn't accept the password. (Maybe I'd forgotten, when's the last time I had to enter it?) I went to the desktop to set up the AEBS to reset the password. Both the AEBS and AirPort Express showed up on AirPort Utility (AU) on the desktop before doing so.
After resetting the password, neither showed up in AU. (I suppose it's not surprising that the APE wouldn't, but the AEBS is connected via ethernet, and the ethernet is working or I couldn't connect here as set up.) I get the message that AU can't detect any Apple wireless devices. I rescanned several times with no luck. And I have pressed the reset button on the AEBS to no avail.
I also can't see either the AEBS or the APE with the PB, which does have an AirPort card, as I mentioned.
Any help or advice would be appreciated.

Theirry, I had (among all the other things I'd done) already pushed the reset button for a little while, but that didn't work. So, not knowing what else to do, I pushed it and held it while I counted to ten three times, and that worked. Probably one could get away with less.
After that, I had to start over again with the AEBS on AU, but I gave it the same network name and the password I thought I remembered, and the APE rejoined it automatically.
I hope that helps.

Can't see Airport Express from Airport Utility anymore

I unplugged my airport express when I went out of town for a week. Now that I'm back, I plug in the airport express and it just blinks amber. In Airport Utility I cannot see any networks. Other notes:
- I'm running XP, using the Airport Express with Airtunes to run my stereo
- when I 'View Wireless Networks' I see both the airport express and my neighbor's Apple base station (so it's odd that they don't show up in Airport Utility
- I have tried resetting Airport Express several times, along with my wireless router, cable modem, and computer
- I have checked to make sure software is up-to-date, and even re-installed the Airport Utility.
- I recently purchased an iPhone, and before I left town it worked (with the Remote app and updated iTunes) with the stereo via the Airport Express
- Both the computer and iPhone see my home network just fine, but Airport Utility sees nothing, despite rescanning
- It is possible that either iTunes and/or Windows may have updated since this last worked a week ago.
- I started debugging this three days ago with no progress (it is not intermittent)
Any advice?

I still had phone support, and they showed me how to fix this.
The piece that I was missing is that after I reset the AX, I have to connect to it directly through the wireless connection (dropping to connection from my PC to my home wireless network). From this connection, I can see the AX in Airport Utility and change the settings.
One other piece of info, I was using a manual setup on the AX. This was necessary due to the 26 character WEP password (not using WPA2).

My airports express and airport extreme have started saying they can't be read by airport utility. How do I fix this?

I have recently been re-jigging my network and in the process have restored my 2 airport expresses and one airport extreme to their default settings. Everything was working 100% fine until suddenly my netywork won't work and when I click on any of my airports to see what's happening airport utility says they can't be read. Can anyone help me solve this?

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

Macbook can't see time capsule through airport utility; powerbook can.

This question probably applies to Airport Extremes as well as Time Capsules, but I happened to see it with a new TC.
My Time Capsule came in yesterday. My plan was to bridge it into my existing network to serve 802.11n over 5ghz. I did the initial setup using a 12" powerbook and it worked fine. I set the Time Capsule in bridge mode and for 802.11n 5ghz, plugged it into my network, and reset. The light on the TC turned green and all looked like it was working. At least, until I tried to connect through my Macbook Pro.
I installed the Airport Utility software that came with the TC, rebooted, then launched Airport Utility -- and it couldn't find any devices. It can, however, see the Airport's wireless network. After a reboot of the TC, it can also connect to the Airport's wireless network. I can get to the internet and the local network, but cannot see the Airport through Airport Utility and cannot see the Time Capsule disk. It's as if Bonjour is being blocked between my laptop and the Airport. This happens whether I'm connected to the TC wirelessly or wired.
I've tried restoring to factory defaults and starting over (I still can't see the TC, even after a hard reset) and I've tried a hard reset of the TC (I had to, actually -- it hung during startup several times). In each case, the powerbook can see it, but the macbook can't. I'm out of things to try. If I can't get this resolved soon, I'm going to have to return the TC, since it's useless if I can't access the disk.
I was planning on upgrading the two computers to Leopard over the weekend, then use the TC for Time Machine for both computers, but if it's not working for Tiger I'm worried that it won't work for Leopard, either.
Is there any variable anyone knows of that blocks a computer from seeing an base station through the Airport Utility? A non-obvious firewall setting, perhaps, or something that could be blocking Bonjour? Does Airport detection even use Bonjour, or am I on the wrong track?
Thanks

An update: I can see the Airport configuration of the TC through my Macbook if I pick File->Configure Other... on the Airport Utility, and then put in the IP address. Which leads me to believe that it's a Bonjour issue, but I haven't figured out more than that.
Of course, the TC is still useless for Time Machine if I can't get to the disk, so the problem remains.

Can't see airport express in airport utility

Similar Messages

Maybe you are looking for