Can't see 'All Messages' in inbox

Hi everyone,
Something really annoying has happened since i updated to ios7. I can no longer see all the messages from my 6 accounts merged into into one mailbox. Instead, I have to go to each different inbox to see the messages, whereas before there was an option to see 'all messages' or 'all mailboxes.
Highly appreciate any help.
Thanks

Hi millz90,
Welcome to the Support Communities!
The functionality of viewing All Inboxes has not changed from iOS 6 to iOS 7.
Take a look at the screenshot from the iOS 7 User guide below.
In this example, the user is looking at an inbox from one specific email account.
Notice the blue Mailboxes link in the top left corner of the screen.
When you tap on Mailboxes on your device, the new screen should have the title Mailboxes at the top and All Inboxes should be the first item on the list.
If you scroll down to the bottom of the screen, you will see your Accounts listed, and you can choose to open a specific email account to look at its Inbox or Sent mailbox.
Write messages - iPhone
http://help.apple.com/iphone/7/#/iph3caef30a
I hope that helps ...
- Judy

Similar Messages

How can I select all messages in Inbox, Trash and/or Bin in one go to delete them. I currently have 3000 unwanted messages in my Bin box and wish to delete them without having to individualy select them 50 at a time.y

How can I select all messages in either my Inbox, Trash and /or Bin in one go to delete them all in one go. I currently have 3000+ unwanted messages in my Bin

Click on the inbox then Edit>Select All (if you are using Mail, if not you'll have to tell us which mail program you use) repeat in other mailboxes as needed.

Can't see all e-mail folders, only inbox. Help appreciated!

I have loaded 2 mailboxes onto my macbook air but I can only see the accounts under 'inbox'. I need to see all the folders too. Any help gratefully appreciated!

Welcome to Apple Support Communities.
If you have set them up as POP accounts, you will not be able to see anything but the inbox.
Depending on the email host, this thread may help you with setup:
https://discussions.apple.com/message/15344148#15344148

My fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my messages on his phone, how can i fix this?

my fiance and i share 1 icloud account on 2 iphones, after the ios 7 update he can now see all my text messages that I type on his phone, how can i fix this? I don't see any of his, just the other way around. The icloud account is in my name.
also, would this affect being able to facetime each other?
Thanks!!

we do what your doing... we use the same ID for "Icloud".
We do NOT use the same ID for: Face time and Imessage

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?

Can you suggest a group messaging app where recipients can't see all the phone numbers within the group? My friends are complaining that they can see all the people in the group; also when I get a response from some in the group, it comes to me ane many others in the goup - its like they've replied all.
Any help would be appreciated.
iPhone 4; iOS5

Sorry it hasn't worked out for you. I threw together a simple project that uses rectangles to represent your Bike and wheel groups. They all animate across the canvas in the bike group and the wheels rotate. I have attached screen shots so you can see how they are constructed.
This image showsthe bike group where the orange rectangle and green circle represent the frame. The white rectangles represent wheels and the green and red rectangles I threw in to represent a wheel that has multiple objects in its group as your wheels do.
Here the animation across the screen has started and notice all wheels rotating and staying with the frame.
Again a little further down the timeline.
I put this one in so you could see the group bounding box around the red and green wheel Good luck with your restart on this project and I hope these screen shots are helpful.

When i open my messages it just goes off I can't see any messages at all I tried resetting my phone didn't work

I don't know why I can't see any messages at all its just blank then goes back to home screen I tried resetting

Close out out of the message app, double tap the home button and completely close out of the app.
then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Can not see all the clips in large Icon view in my bin

I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanks

Nick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked.

I can not see any messages that are coming

hello friends,
I have a problem where some users from an external domain can not send messages to my domain.
I get this external domain for some users but not others in the same domain.
those users who can not receive the external domain, can send to other domains, such as: (yahoo, google, etc.) I did tests and received, but not in my.
I use a scan mail for exchange, but not found where to see all messages that enter my scan mail. I just got to see if it is looking for the real time, but that and bad.
guide the logs I do not find any option that shows all messages that are coming. I want to make sure that the messages are coming in my scan mail for exchange.
I did some analysis, but I need help to do some basic tests:
. [email protected] and [email protected] are from the same domain.
Sending email User ([email protected]) - I get the two domains
. The email sent by the User ([email protected]), I found in my exchange 2010 tracking log.
. I received this same email on (yahoo.com.br).
. I noticed that the header of the message and the address output different from the message sent by User ([email protected])
Sending email User ([email protected]) - Not get in my domain
. Not found in the tracking log of my exchange 2010 and not given any locks on my scan mail for exchange.
. I received this same email on (yahoo.com.br)
. I noticed that the header of the message and the address output different from the message sent by User ([email protected])
General observation:
. When doing a test with nslookup seeking MX, MX identified that this header in the message User ([email protected]) and different from the User ([email protected])
I'm a little confused if the problem is in some blockage in my environment or can be problem in the ([email protected]) environment.
Thank you.

Resolved.
As was reported, the client received an IP and not others. (Identified in the header)
We monitor the firewall and that confirmation that the IPs closed connection on port 25, this means that they were trying to send.
Looking at screen real-time Trend Scan Mail noted that at the time the User would send message apareceiam a message "User Category Spam", but gave not to identify what was the specific email. The vision is very bad.
Then questioned the sender if he was getting some feedback and he said yes. While viewing the message is written that there is a blockage (IP Email Rreputation) that sends the email.
The SPFs of making an appointment, identify the block of IP that the client could receive was registered in the SPF and what not reached, was not.
I believe so Trend included these IPs as bad.
Added the IPs whitelisted email reputation and the messages were received by the customer.
Thank you.

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

When I open my Pictures File in Bridge I can't see all my folders, even though I can see them in my Finder ?

When I open my Pictures File in Bridge I can't see all my folders, even though I can see them in my Finder ?

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Remove all message in Inbox?

Hi all!
Please help me? I have one question. I want remove all message in Inbox when I recreate account .How to do?

Hi,
BanhChuoi wrote:
Please help me? I have one question. I want remove all message in Inbox when I recreate account .How to do?Just the INBOX or do you want to remove all emails for the account?
If the latter then you can do this by running the following on the messaging server:
./mboxutil -d user/<uid>/INBOX
If the former, this isn't actually easy and would require deleting emails off disk and then running a reconstruct on the account.
Regards,
Shane.

Where can I see SAP Message numbers for Errors.

Dear all,
Where can I Message No's in SAP.
for Some error messages, when I click F1 help, system is showing nothing but one message numbers.
Could you tell me whre can I see all these messages.
Your advice will be highly rewarded.
Thank you,
Raghu ram.

Hi,
F1 is just a help to tell u abt the field u r pressing F1 of.
When u get the error mess. click on that error mess.(Red Line)
it will tel u abt the error in brief and sometimes will help u with the customization key too.(u can click on the key button of the "Performance Assistant" if thre)
By the way tell abt the error u r gettin now.
Hope this helps
Rgds

I can't see a message from my union because of problems with changed adress for pop-upwindows and some other issue

Hi,
I'm from Sweden and I'm having problems with a website my union has. I have been able to see messages from them before but they've changed their adress and on the site they tell people they have to put the new adress on the approved list for pop-up windows. I have done so but it's still not working. Maybe I've done it wrong, I don't know but it's annoying as hell that I can't see the messages they send.
I really need help with this.
Best regards,
Lena

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I just updated my iphone to ios5 now when i go to music it says 'no content' when i checked my capacity it shows 7.9gb in 'other' . i can also see all my music is on the 'device' only when i go on the computer

i just updated my iphone to ios5 now when i go to music it says 'no content' when i checked my capacity it shows 7.9gb in 'other' . i can also see all my music and apps on the device menue in itunes.

I went to the Summary page of iTunes and checked "Sync only checked songs and videos". Synced again, and no songs were playable. Unchecked my only playlist and synced again. All the songs were gone as expected. Checked my playlist again, and all the songs were there. Looked at them under the music tab, but they were all grayed out. Tried to play any of them, but could not. Tried to sync again and received the message, "The iPhone could not be synced because the sync session failed to start."
Every time I connect my iPhone 4 to iTunes, it says "iTunes was interrupted while restoring the contents of the iPhone ____. Would you like to restore this iPhone again now?" I click "Continue Restore" (I'm tempted to click "delete backup.) It then says, "An error occurred while restoring this iPhone (-54). I click OK. I'm redirected to the "Set up your iPhone screen". It's already selected to "Restore from backup of ___'s iPhone". Click continue. It restores for about 2 minutes. iTunes says my settings have been restored and wait for it to restart. And again the message that "iTunes was interrupted..." (see above). Crap.
How do i get this back to where it belongs?

Can't see 'All Messages' in inbox

Similar Messages

Maybe you are looking for