Can't see any computers
When I search for computers on my network, for file sharing, I cannnot find any.
When I try to connect to another computer using its IP address, it still cannot connect.
It worked just fine, untill the computer I was transering files from, crashed, and unexpctedly dissconected my mac.
Just so you know, this is the only mac in my house, the other computers are Windows.
In short, it appears the Windows computer messed up my macs file sharing capabilities.
AWESOME!!
Thanks for helping!
Do you know how to make the computers appear under the network folder, automaticly?
It's OK if you can't; I don't use file sharing often, any way.
Similar Messages
-
WIFI on 2504. Users can't see any computers in "My network places".
Hello. I'm using 2504 CISCO controller and three AIR-CAP2602I-R-K9 access points. So I organized simple WIFI network with AES encryption. Users can easily connect to the proper SSID and after put a login have Internet access.But they just can't see any computers or shared folders on servers in "My Network Places". If I connect any workstation by wire I haven't this problem. So the issue appears only during WIFI access to the LAN.
Please advise, what can I change in 2504 settings.
Thank you.The WLC doesn't block this unless P2P blocking is enabled. The easiest way to test is to create an open SSID and map that WLAN to an existing wired Vlan. Doesn't tweak the WLAN except for making it wide open. Them associate your wireless client to that new SSID and see if they see the resources.
That is the configuration I was telling you about that you had a screen shot of. As long as that is disabled, you should be able to see the resources.
Sent from Cisco Technical Support iPhone App -
How can I see which computers (computer name) Creative Cloud is installed on?
How can I see which computers (computer name) Creative Cloud is installed on?
Hi Arno ten Hagen,
To check for activation you need to go to all the machines in which you have installed CC apps, launch any of the CC software, go to help and you will see the email address mentioned by which you are logged in to that machine.
Kb: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html .
Regards,
Romit Sinha -
Apple TV 3 not seeing any computers on the homeshare but is connected to wifi
I've had this problem for a few weeks now.
I got an Apple TV 3 from my Dad and put it in my new house. Connected it to my Wifi no problems but the problem is that it won't connect to my homeshare - it can't see any of the computers in my house.
It's connected wirelessly, it works with Airplay, I've done all of the diagnostic tests. My homeshare is definitely on, my firewalls are off, the router ports are open, the router has been reset several times, iTunes is left open, the homeshare is set up correctly in terms of usernames etc. I'm just out of ideas on why it won't connect to the homeshare.
I even took it to an apple store - they connected it to their own homeshare no problems so the ATV itself is working properly.
Someone help!Let's get the troubleshooting steps.
1. Make sure you have iTunes on your computer updated to latest 10.7 version. (applies to both - Mac and PC)
2. Make sure you have your Apple TV updated to latest software 5.1 (Apple TV 2nd and 3rd Generation)
3. Make sure that the computer (with iTunes running) is on the same LAN (Local Area Network) as the Apple TV.
4. Use the same Apple ID on both iTunes and Apple TV (Apple TV can work / switch between different Apple IDs but keep it simple for now)
If you still cannot see your computer from the Apple TV (Computers)
1. Reset your Apple TV
On your remote Hold down Menu and Down, until the Apple TV status light blinks rapidly
2. Make sure you have no antivirus or firewall on your computer that may be blocking access to your computer over LAN.
Let me know if you need detailed info on any of the steps above. -
One computer can't see any other iPhoto shared libraries
My Powerbook can't see any other computer's shared iPhoto libraries. However, all my other computers can see its iPhoto library.
All computers are running the same version of iPhoto.
I posted this in the iPhoto forum, but I'm reasonably sure this is a networking problem. Why? If I create another user on my Powerbook, it can see all the other shared libraries. So, the problem exists on only one account on one computer. I think there is a corrupt system setting in that account's ~/Library/ somewhere. Any suggestion which file it is? I've already dragged out likely culprits to no avail.
I have no problem sharing iTunes libraries; that works fine. So do file transfers to and from.
Here's what else I've done:
Verified iPhoto Preferences is set to "Look for shared photos" and "Share my photos" (obviously).
Tried requiring a password, and not requiring a password
Verified System Preferences > Sharing > Firewall has "iPhoto Bonjour Sharing" checked.
Deleted ~/Library/Preferences/com.apple.iPhoto.plist
Deleted ~/Library/Preferences/com.apple.systempreferences.plist
Deleted ~/Library/Preferences/com.apple.iApps.plist
Deleted ~/Library/Preferences/com.apple.digihub.plist
Turned off Little Snitch
Quit / restarted iPhoto a few times
Logged in / out, rebooted a few times
Researched iPhoto Help
Researched the discussion boards
Repaired permissions on both (as you can see, I'm resorting to voodoo tactics)
Dragged my iPhoto Library out of ~/Pictures and created a brand new empty library (more voodoo)
Googled the problem
Posted this topic
That's all I can think of to do.
So... what haven't I done?If iPhoto works for one user on a computer, it ought to work for all users. So the program itself can't possibly be a problem. Right?
Apparently not. I deleted iPhoto, and reinstalled it. That fixed the problem for the one recalcitrant account.
The problem with voodoo is that sometimes, it works. -
I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my default wallpaper selected when I started the upgrade process. Can I download the default animated wallpaper of ios 7?
thank you
ps. I'm apologize for my bad english languageA different approach would be to:
1. Delete the contents of the library on the desktop Window 7 computer;
2. Turn off iTunes Match;
3. Copy the contents of the Music folder from the working Windows 7 computer to the desktop Music folder;
4. Import the new contents of the Desktop music folder into the library;
5. Close / restart the iTunes client and confirm that the library has all the Songs as anticipated;
6. Turn on the iTunes Match service and allow it to run to completion.
This is a proven process on my Windows 7 computers and works very well. -
Can't see any text members when I use flash 8.
I'm using flash 8 and some of my users are having trouble
seeing my site because they can't see any of the text!!! In some
computers it works ok but some users can't see any text member even
if they upgrade the flash player to 8 version. How do I correct
this!
I had had problems with this when I ran a swf directly, I
couldn't see any text; but when I put the swf into a html file I
can see the text members that the web page has. Why is this
happening!!! This did'nt happend with version mx. How can I correct
this problem!
Please help!
Thanks a lot!
Brenda Sanchez.just because people say they have flash 8 doesn't mean they
actually have flash 8 have any of them navigated to a flash player
detection site and confirmed they have flash 8? have any of them
right clicked on an embedded swf and confirmed they have flash
8? -
Mac can not see any printers.
I have 2 other computers (1 windows / 1 Mac Book) using the printers just fine but once device can not even find a printer. Any ideas?
Printer is Ricoh Aficio MP C3501
The computer could not find the printers so I cleared them from system preferences. Updated everything, including downloading the most up to date driver, restarted and still can not see any printers.
Thank you for your help,
Darren DHello ddelin,
Welcome to the Apple Support Communities!
I realize that two out of your three computers can see your printer, but one MacBook Pro will not. You have also done some great troubleshooting by deleting the printer, installing drivers, and trying to re-add the printer. If the issue continues, I would suggest resetting the printing system. Please use the attached article for more information.
Troubleshooting printer issues in OS X - Apple Support
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Best regards,
Joe -
Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS
I am looking in this table with SQLPlus and TOAD and can not see any rows.
Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else? -
how do I delete photo ALBUMS from my iPHONE 4?
I sync via icloud and I can not see any folders selected in itunes.
I searched the internet and basically there is no one who has the answer (so far)
to how you delete the iphone photo library and misc albums
I have also had every iphone and I am not stupid.
charles altmanReplying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....
-
I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
Several months ago, I kept getting prompted to 'update' my iphoto library. When I finally clicked on the 'update' button, it 'greyed out' ALL of my photos. Now ALL of my photos are grayed out and I can't see ANY of my pictures unless I click on each grayed out photo individually and open them, ALL of the thumbnails are greyed out. It is THE WORST!! I have no idea how to fix this problem and its been MONTHS AND MONTHS of *** pain. Anyone?? Please help!!!
Thanks so much!!!Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
and please tell us what version of iPhoto and of the OS you have
LN -
HT2688 How can I see what computers are authorized to share?
How can I see what computers are authorized to share? My e-mail address changed and I need to make sure one of my authorized computers is not my old address. In itunes.
In order to see which devices are authorized on your account:
Open iTunes
Click Store
Click Account
Click View Account
Enter your password
Look in the second section iTunes in the Cloud
To the far right you'll see Manage Devices
Once it's clicked you will see all of the devices currently authorized in iTunes/on your account
I was going to say, "Hope this helps," but based on the above, I'm pretty sure it did!
Thanks guys... -
I set up Firefox sync from my old computer. This has had its hard drive replaced and been sold. I now want to retrieve the information and get my bookmarks on my new computer. I can't see any way to do this!
Help pleaseTo build on the second option provided by The Edmeister make sure that you have your Sync Key, if this is not the case Firefox Sync will not help you (data is encrypted with that Key).
Finally, if the last sync happened long time ago, it may be the case that your data is not on the servers anymore. Firefox Syn wasn't designed as a back up service. -
I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheersif it's ntfs microsofts filesystem then you need a windows machine to recover them
Maybe you are looking for
-
ITunes 6.0.3.5 and Quicktime ~Problems~
My Quicktime won't open, even afetr i downloaded the new version which Katrina sed in one of her answers that she answered for someone. Also itunes won't open it loads but then doesn't do anything, I don't get an error or anything but it jsut won't o
-
Validate Standard ECC Procurement Reports for BI Procurement Report
Hi Experts, Are there any standard SAP reports whereby I can find the: Acquisition, operation, maintenance and disposal costs of an Equipment/Asset by procurement cost type, Acquisition, operation, maintenance and disposal costs by an Equipment/Asset
-
How to activate trace from BO in my PC
Hello!! I trying to active a trace to see my mdx log in my PC. I am doing the steps indicate in SAP Kb Note: 1235111. This note say the following: "OverWrite"="No" "AppendPID"="No" "LogFile"="<your BOE120 install folder here>/bobje/logging/MDA.log" "
-
I'm sure this is simple - how do you build a long list of names to scroll up the screen, like movie credits? thanks
-
Error when trying to open up a new workspace
I am new at this and am trying to use JDeveloper to create a simple program. I try to bring up the developer by clicking on javaw or java executable in the bin folder and I receive the error: Cannot find the class main. Program will exit. What do I n