Can't see any device after i attempt an upgrade and device useless til i reset on another pc.... Help!

Everytime I try to do an upgrade via my PC it freezes the phone (screen set on pic of usb requesting to plug into itunes) and itunes fails to recognise device. This has happened with my iphone 3s, my ipad, my ipod shuffle, and now with my brand new - never used iphone 4s.
It will only rework if I completely restore on a different PC. Have uninstalled / reinstalled itunes and tried all the suggestions. Figure it has ato do with the PC as this has happened to multiple devices now. Very very frustrating as I don't have a second PC and is a massive inconvenience. Does anygone have any suggestions? I want to use my new phone!!!!

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)
Check that you have correctly followed the instructions for your model of Apple TV.
If not already, try using a powered USB port.
Repeat the process but this time try connecting the cable while iTunes is closed.
Repeat the process with another cable.

Similar Messages

I am trying to sync my ipod touch. Previously I had an ipod nano, when I hook up the touch I can't see any devices so I can sync it.

I am trying to sync my new ipod touch with the music already in my itunes library that I had for my ipod nano. I am unable to see any devices in order to sync my music. What do I do?

Hey suzq123,
Thanks for the question. I understand you are having issues with your iPod touch appearing in iTunes for Windows. The following article may help to resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Can't see any devices hooked up to Sata ports #5&6 on K9A2 Plat board

Hi there, I'm new to this forum.
My virgin system consists of
MSI K9A2 Platinum, Bios 1.4
4 GB Corsair
CoolerMaster Silent Pro M600
AMD Phenom II X4 940
Zalman CNPS9700NT
Visiontek ATI Radeon 4850
SuperTalent 64GB Sata II SSD
Samsung SH-223 DVD-RW, Sata II
LiteOn CD-RW IDE
I can get into BIOS and see devices hooked up to Sata ports #1 to #4, but I can't see Sata ports #5 & #6 with any device connected to those ports. I know these Sata ports are connected to a Promise T3 controller.
1. Do I need to install the Promise driver first?
2. Can I install the O/S on a disk drive hooked up to Sata port #5=
Thank you for any help.

1 Yes, or load with F6 during install
2 Yes.
The promise T3 has it own BIOS, you should see it when the controller is turned on as a separate boot page.

I updated my iPhone 5 to iOS 8, and my I can't see any of my call history at all, and the recents displays a really large number. Any way to resolve this?

This is is what my call log looks like and it won't display any calls at all.

First I would try to hold down the power and the home button for about 15sec, but at least as long as the iPhone restarts, if it is still stuck or still in recovery mode then I can suggest you the tool "Wondershare Dr. Fone for iOS", it is both a Windows and Mac tool and I just used it today to get my iPad out of the Recovery mode.
Tell me if any of these options worked for you.

Can't see any text members when I use flash 8.

I'm using flash 8 and some of my users are having trouble
seeing my site because they can't see any of the text!!! In some
computers it works ok but some users can't see any text member even
if they upgrade the flash player to 8 version. How do I correct
this!
I had had problems with this when I ran a swf directly, I
couldn't see any text; but when I put the swf into a html file I
can see the text members that the web page has. Why is this
happening!!! This did'nt happend with version mx. How can I correct
this problem!
Please help!
Thanks a lot!
Brenda Sanchez.

just because people say they have flash 8 doesn't mean they
actually have flash 8 have any of them navigated to a flash player
detection site and confirmed they have flash 8? have any of them
right clicked on an embedded swf and confirmed they have flash
8?

After downloading the latest Itunes software, I can't connect any device to Itunes!

After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!

i am using windows 8 and still can't find my iphone on itunes

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my wallpaper when I started the upgrade process

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my default wallpaper selected when I started the upgrade process. Can I download the default animated wallpaper of ios 7?
thank you
ps. I'm apologize for my bad english language

A different approach would be to:
1. Delete the contents of the library on the desktop Window 7 computer;
2. Turn off iTunes Match;
3. Copy the contents of the Music folder from the working Windows 7 computer to the desktop Music folder;
4. Import the new contents of the Desktop music folder into the library;
5. Close / restart the iTunes client and confirm that the library has all the Songs as anticipated;
6. Turn on the iTunes Match service and allow it to run to completion.
This is a proven process on my Windows 7 computers and works very well.

Why I can't see any Firefox browser windows after I open Firefox in Mac?

I open my Firefox as usual, but this time, I can't see any Firefox browser windows come out but only the menu bar on the top was changed into Firefox menu bar. Is there any problem with my Firefox or I accidentally activate some "hiding" function?

I am new to Ubuntu, but I see videos ok. Firefox may play some natively but I also have FlashPlayer installed. IIRC FlashPlayer is not on the original Ubuntu 11.10 CD but has to be installed as a separate Firefox plugin. From your system information aside it appears you do already have FlashPlayer installed.
* Have you got FlashPlayer enabled currently ?
* I Note you have [http://en.wikipedia.org/wiki/DivX Div X] installed, which is not something I know about, but could that be interfering with some videos, have you tried disabling Div X.
See also the articles
*[[Video or audio does not play]]
*[[Viewing video in Firefox without a plugin]]

After iTunes 10.3.1, my Apple TV 1st gen. can't see any shared iTunes libraries!

Ok, everything was working fine until iTunes 10.3 came into the scene. Post 10.3 / 10.3.1, my Apple TV 1st gen can't see any shared iTunes libraries...

Hello everyone
I have fixed it! The problem was that Apple TV had tried to connect to the computer so many times the Virus Barrier X6 had decided it was a malicious attack and blocked the IP address.
I fixed the connection by adding the IP address to a trusted list within the FireWall rules.
To do the same follow these instructions
Go to Virus Barrier X6.
Click the 'Anti-Vandal' Tab at the top of the screen.
Click 'Blocked Addresses'. Select the IP of Apple TV (you can find this IP address through your router software). Click the '-' sign at the bottom of the left hand column. If the Apple TV IP address isn't listed then you have a different problem!
Click 'Trusted Addresses'. Click the '+' sign at the bottom of the left hand column. Add the IP address of Apple TV in the pop up box, select 'permanent', add any notes you want to and then click 'OK'.
Turn on Apple TV and it should all be working fine (assuming that your 'Home Sharing' setting are all on and you are connected the the network!).
Hope that helps
M

Can not see the device net Master Interface in my project.

Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk?

Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!

Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
My MBP will not "see" my new MB or my back-up drive—both connected via a firewire 400 (6 pin) cable. Both running Tiger X.4.11
I have used this cable to connect my MBP and a TiBook in the past as well as to back-up onto the LaCie e-drive.
I have run "disk repair" and "permissions" on both machines.
BTW—"permissions" are regularly out of wack on the MBP. But, the disk is OK according to Disk Utilities.
I also cannot put the machine to sleep after logging out. Has a hard time shutting down as well. Sometimes I need to force a re-boot.
Can't run Disk Doctor because I don't have a bootable disk yet. It's coming via snail mail.
The new MB "sees" the e-drive connected with the same cable.
I can't transfer my files to the new MB nor can I back up.
Is it time for a "clean install"? Makes me nervous that I cannot backup before trying anything drastic.
Can someone please help me?
Thanks in advance.
Tek

Put the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa.

I see a number on the mail icon, but I can't see any mail.

Just got the new iPad. It seems to have synced to the cloud.
The mail icon has an increasing number attached to it, but I can't see any mail.
That number is the number of new messages, right?
Thanks,
Ty

Hi,
Yes, I think so, but it is a new device and operator error could be the culprit.
But if I'm seeing the mail increment after I set it up, it was weird not to see emails in the cue.
Maybe it was a question of timing. It's working now.
Thanks for your help.
Ty

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

HT201365 Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in

Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in my pc...?

Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

Can't see any tumbnails, Can't create proxy.

Hello,
I'm new into the FCS support and I do have a problem now with my FinalCutServer version 1.5.2 running on an Xserver with V-trak.
First of all everything was running correctly but after some one did "propagate permissions" on my root harddrive everything was messed up ofcourse.
I was able to create a back-up of the FCS database (production media and proxy media folders are stored on the V-trak).
I did a complete clean install of the server and FCS and did place back the backup.
Everthing works fine now but the only problem is that I can't see any thumbnails, when I rightclick on an image and click on View Original that all works perfect. When I click in the top and then at the left the landscape looking icon I get the error message that he can't create a proxy.
This also happens with new images that go into FCS.
I did already try to right-click on an image and then Analyze or re-create proxy but none of that works.
Is there anyone who can help me or that have the same issues after restoring a back-up?
Kindest regards,
Luc Janssen
Update: Maybe important to know, my Proxies.bundle is empty.

Sounds like propagating the permissions is what screwed you up, as I'm sure you're aware. That's something that has to be adjusted in the Server Admin app, not in FCSvr. How does FCSvr connect to the storage? Whatever user it's connected as needs to have read/write access to your proxies bundle and also the directory in which it lives. It looks like it doesn't have write access, which explains why it's empty, so proxies/thumbnails/poster frames cannot be generated. Go to the "Search All Jobs" list and see what it says when you try to generate a proxy or thumbnail - I'm guessing you'll see a bunch of FAIL's. Open one of the jobs and look for the error message - I'm betting you'll see something to the effect of "Could not be created: Permission denied."
Permissions changes can really screw your distribution up - I find that permissions issues are what plague my own distribution almost weekly. If you have a distribution where your users have Finder-level access to the storage that FCSvr is cataloging, you may have situations where your users will create folders and files that FCSvr doesn't have write or even read access to, because of various reasons (maybe the user copied the folder/file from elsewhere, maybe their umask is 022, etc). That can lead to wanting to use Server Admin's "Propagate Permissions" functionality, which if used improperly can cripple your entire distribution.
Good luck.

Can't see any device after i attempt an upgrade and device useless til i reset on another pc.... Help!

Similar Messages

Maybe you are looking for