Can't see any disk partition after disk sanitizer

On my HP4530sPro is mistakenly launched Disk Sanitizer, and now, when I try to install Windows7 OS (Linux Enterprise Desktop was installed in the basic configuration), I do not see any disk partition. What to do.
Nicest compliments
This question was solved.
View Solution.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage, as this is the consumer support forums.
You can access the enterprise support forums at the following link.
http://goo.gl/LsnuK
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my wallpaper when I started the upgrade process

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my default wallpaper selected when I started the upgrade process. Can I download the default animated wallpaper of ios 7?
thank you
ps. I'm apologize for my bad english language

A different approach would be to:
1. Delete the contents of the library on the desktop Window 7 computer;
2. Turn off iTunes Match;
3. Copy the contents of the Music folder from the working Windows 7 computer to the desktop Music folder;
4. Import the new contents of the Desktop music folder into the library;
5. Close / restart the iTunes client and confirm that the library has all the Songs as anticipated;
6. Turn on the iTunes Match service and allow it to run to completion.
This is a proven process on my Windows 7 computers and works very well.

[Solved] Can't see GPT disk partitions in Windows 7 (64-bit)

I just added 2 new disks and had them set up equally with GPT and equal partitions, to use the partitions as RAID1 in Arch, and the rest of the storage for Windows. It works as expected in Linux (I guess), but Windows shows them as uninitialized.
Can this be due to the fact that I created the GPT and partitions using fdisk? Caus' gdisk can't see any partitions either when I start it. If so, is there any way to convert it or do I need to redo everything?
The output of "fdisk -l" shows this:
Disk /dev/sdc: 1.8 TiB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: xxx-random-identidifier-xxx
Device Start End Sectors Size Type
/dev/sdc1 2048 xx xx 1.6T Linux RAID
Disk /dev/sdd: 1.8 TiB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: xxx-random-identidifier-xxx
Device Start End Sectors Size Type
/dev/sdd1 2048 xx xx 1.6T Linux RAID
Last edited by Chrilleee (2015-05-10 07:51:54)

Added a Windows partition now. Still the same.
In Windows it looks like this:
http://s2.postimg.org/a63qwgmg9/disks.png
Output from gdisk -l:
# gdisk -l /dev/sdc
GPT fdisk (gdisk) version 1.0.0
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdc: 3907029168 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): xxx-random-identidifier-xxx
Partition table holds up to 128 entries
First usable sector is 2048, last usable sector is 3907029134
Partitions will be aligned on 2048-sector boundaries
Total free space is 1407 sectors (703.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 3450000000 1.6 TiB FD00
2 3450001408 3907029134 217.9 GiB 0700
# gdisk -l /dev/sdd
GPT fdisk (gdisk) version 1.0.0
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdd: 3907029168 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): xxx-random-identidifier-xxx
Partition table holds up to 128 entries
First usable sector is 2048, last usable sector is 3907029134
Partitions will be aligned on 2048-sector boundaries
Total free space is 1407 sectors (703.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 3450000000 1.6 TiB FD00
2 3450001408 3907029134 217.9 GiB 0700
-- mod note: converted img to url --
- WorMzy
Last edited by WorMzy (2015-05-09 23:02:20)

Can't see USB disk attached to other mac

I have an Airport Express, on the network is a Mac Mini which has an USB disk attached to it (to the Mac Mini).
However, I can't see the disk from any other mac that uses the Airport (this used to work)
I've looked for "disk sharing" in Preferences and in the Airport Setup Utility, but couldn't find anything.
I've also made the Sharing & Permissions of the USB disk for "Me" and "Everyone" as " Read & Write"
Any idea how I can resolve this issue?
Thanks,
Awfers

Ok, thanks for clarifying. You don't need to change any settings within the AirPort Utility, but let's double-check your Mac Mini's settings to make sure that it is both sharing the disk properly and that it's OS X firewall is not blocking the requests.
For File Sharing: System Preferences > Sharing > File Sharing
o Make sure that the folders on your external hard drive, that you want shared, are selected in the Shared Folders window.
o Make sure that you have, at least, Everyone = Read Only set in the Users window.
o Select Options..., and then, verify that you have "Share files and folders using AFP" is enabled for Mac clients, and "Share files and folders using SMB" is enabled for Windows clients.
For the OS X Firewall: System Preferences > Security > Firewall
o If "Allow all incoming connections" is enabled, verify that: "File Sharing (AFP, SMB)" is now displayed in the list.

Why I can't see any Firefox browser windows after I open Firefox in Mac?

I open my Firefox as usual, but this time, I can't see any Firefox browser windows come out but only the menu bar on the top was changed into Firefox menu bar. Is there any problem with my Firefox or I accidentally activate some "hiding" function?

I am new to Ubuntu, but I see videos ok. Firefox may play some natively but I also have FlashPlayer installed. IIRC FlashPlayer is not on the original Ubuntu 11.10 CD but has to be installed as a separate Firefox plugin. From your system information aside it appears you do already have FlashPlayer installed.
* Have you got FlashPlayer enabled currently ?
* I Note you have [http://en.wikipedia.org/wiki/DivX Div X] installed, which is not something I know about, but could that be interfering with some videos, have you tried disabling Div X.
See also the articles
*[[Video or audio does not play]]
*[[Viewing video in Firefox without a plugin]]

After iTunes 10.3.1, my Apple TV 1st gen. can't see any shared iTunes libraries!

Ok, everything was working fine until iTunes 10.3 came into the scene. Post 10.3 / 10.3.1, my Apple TV 1st gen can't see any shared iTunes libraries...

Hello everyone
I have fixed it! The problem was that Apple TV had tried to connect to the computer so many times the Virus Barrier X6 had decided it was a malicious attack and blocked the IP address.
I fixed the connection by adding the IP address to a trusted list within the FireWall rules.
To do the same follow these instructions
Go to Virus Barrier X6.
Click the 'Anti-Vandal' Tab at the top of the screen.
Click 'Blocked Addresses'. Select the IP of Apple TV (you can find this IP address through your router software). Click the '-' sign at the bottom of the left hand column. If the Apple TV IP address isn't listed then you have a different problem!
Click 'Trusted Addresses'. Click the '+' sign at the bottom of the left hand column. Add the IP address of Apple TV in the pop up box, select 'permanent', add any notes you want to and then click 'OK'.
Turn on Apple TV and it should all be working fine (assuming that your 'Home Sharing' setting are all on and you are connected the the network!).
Hope that helps
M

Can't see any songs/etc on Nano even though iTunes says it has!

Hi,
I had a problem with my nano today so I followed the instructions on this website for troubleshooting and restored my nano back to factory settings, reinstalled the latest copy of iTunes and then copied songs back onto my nano.
Now whenever I connect my nano, it keeps asking me to register it (which I've already done). Then when I click on Finish, it then automatically 'updates' and according to iTunes it says that it has loads of tunes on it. As soon as I disconnect however, I can't see any songs, playlists etc on my nano.
Another thing is that before disconnecting I tried to change the update setting to manual. After disconnecting and reconnecting however, it's somehow changed it back to automatic.
What's wrong? Can anyone help me please?
Thanks,
Newbie
4gb Nano Windows XP Pro
Message was edited by: ananonewbie

Put it into disk mode first:
http://docs.info.apple.com/article.html?artnum=93651
Then change the drive letter as in the last article.
Once you've done that, eject the iPod and reset it.
http://docs.info.apple.com/article.html?artnum=61705
Then you can reconnect it, and you should be able to take care of it in iTunes. You just might have to restore it once more, once you get the drive letter changed.
CG

I can't see the Mac partition (and I can't install Mac Os X!)

Well, I installed Windows XP, I used MacDrive, etc. Suddenly it appeared a blue screen (in XP) and now I can't see the Mac partition, even pressing Alt while booting. Also I can't reinstall Mac Os X because the Mac partition doesn't appear in the install's menu or in the disk utilities (in the disk utilities it gets freezed when I try to enter to it, so I can't manage or restore the hard drive)
Help!

Hi, Ralph,
The problem is that I did erase the partition, using disk utility, but I can't go back to my original disk size pre-partition, as disk utility won't let me do it and gives the message "Couldn’t modify partition map because file system verification failed." When I try to use Boot Camp Assistant it won't let me select the third option to remove windows.

Can't see any words on finder menu

My finder menu, trash, and drop down menus are blank. I can't see any words or icons.
This is what it looks like
http://imgur.com/y9bMFi7,dHUismv

Try the following: boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk permissions and disk. Reboot normally and check the menus.

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Can't see any tumbnails, Can't create proxy.

Hello,
I'm new into the FCS support and I do have a problem now with my FinalCutServer version 1.5.2 running on an Xserver with V-trak.
First of all everything was running correctly but after some one did "propagate permissions" on my root harddrive everything was messed up ofcourse.
I was able to create a back-up of the FCS database (production media and proxy media folders are stored on the V-trak).
I did a complete clean install of the server and FCS and did place back the backup.
Everthing works fine now but the only problem is that I can't see any thumbnails, when I rightclick on an image and click on View Original that all works perfect. When I click in the top and then at the left the landscape looking icon I get the error message that he can't create a proxy.
This also happens with new images that go into FCS.
I did already try to right-click on an image and then Analyze or re-create proxy but none of that works.
Is there anyone who can help me or that have the same issues after restoring a back-up?
Kindest regards,
Luc Janssen
Update: Maybe important to know, my Proxies.bundle is empty.

Sounds like propagating the permissions is what screwed you up, as I'm sure you're aware. That's something that has to be adjusted in the Server Admin app, not in FCSvr. How does FCSvr connect to the storage? Whatever user it's connected as needs to have read/write access to your proxies bundle and also the directory in which it lives. It looks like it doesn't have write access, which explains why it's empty, so proxies/thumbnails/poster frames cannot be generated. Go to the "Search All Jobs" list and see what it says when you try to generate a proxy or thumbnail - I'm guessing you'll see a bunch of FAIL's. Open one of the jobs and look for the error message - I'm betting you'll see something to the effect of "Could not be created: Permission denied."
Permissions changes can really screw your distribution up - I find that permissions issues are what plague my own distribution almost weekly. If you have a distribution where your users have Finder-level access to the storage that FCSvr is cataloging, you may have situations where your users will create folders and files that FCSvr doesn't have write or even read access to, because of various reasons (maybe the user copied the folder/file from elsewhere, maybe their umask is 022, etc). That can lead to wanting to use Server Admin's "Propagate Permissions" functionality, which if used improperly can cripple your entire distribution.
Good luck.

WIFI on 2504. Users can't see any computers in "My network places".

Hello. I'm using 2504 CISCO controller and three AIR-CAP2602I-R-K9 access points. So I organized simple WIFI network with AES encryption. Users can easily connect to the proper SSID and after put a login have Internet access.But they just can't see any computers or shared folders on servers in "My Network Places". If I connect any workstation by wire I haven't this problem. So the issue appears only during WIFI access to the LAN.
Please advise, what can I change in 2504 settings.
Thank you.

The WLC doesn't block this unless P2P blocking is enabled. The easiest way to test is to create an open SSID and map that WLAN to an existing wired Vlan. Doesn't tweak the WLAN except for making it wide open. Them associate your wireless client to that new SSID and see if they see the resources.
That is the configuration I was telling you about that you had a screen shot of. As long as that is disabled, you should be able to see the resources.
Sent from Cisco Technical Support iPhone App

ITunes 11.3. I can't see any way of accessing the CD database to get track names if somehow they weren't accessed when ripping the CD into my computer. It used to be EASY.

ITunes 11.3. I can't see any way of accessing CD track names through iTunes AFTER I ripped the CD into my computer through iTunes. For some reason the track names were not imported when I ripped the CD. Anyone know how to do that?

As far as I know this has never been a feature of iTunes. You always have to identify the CD before ripping. If you selected the wrong CD you can re-identify it for the next time the Cd is inserted but it won't re-label tracks you have already ripped. To re-identify an incorrectly identified CD: "Insert the CD and select it in iTunes, then menu Advanced > Get CD track names. It should requery the Gracenote database and let you pick the correct album." - https://discussions.apple.com/message/18901866 - Newer versions in upper right hand corner, Options>Get Track Names

I see a number on the mail icon, but I can't see any mail.

Just got the new iPad. It seems to have synced to the cloud.
The mail icon has an increasing number attached to it, but I can't see any mail.
That number is the number of new messages, right?
Thanks,
Ty

Hi,
Yes, I think so, but it is a new device and operator error could be the culprit.
But if I'm seeing the mail increment after I set it up, it was weird not to see emails in the cue.
Maybe it was a question of timing. It's working now.
Thanks for your help.
Ty

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

Can't see any disk partition after disk sanitizer

Similar Messages

Maybe you are looking for