Can't see any more my messages from the differents mailbox
I have 5 mailbox (see image screen at beginning) and usually I can go from one to another seing a navigation volet (french term sorry) and I don't know what happen, I'm in one of them, impossible to see the others (see screan now) and to go in the other mailbox.... could you help me to recover the navigation volet on the left
regards and merry chrismass ;-)
Ronie
I have a similar problem with Mailboxes but cannot find a discussion to help me. I have two e-mail accounts - Yahoo and gmail. Yahoo is my primary account. I seldom ever use gmail for anything. One subscription required it or I would not have a gmail account at all.
Recently the gmail account keeps growing mailboxes. I can't get rid of them either. I found instructions here on how to get the gmail messages (of which there are less than 4 and seldom any new ones) to go into the Inbox and NOT into the gmail box. I followed the directions and the Yahoo Inbox and subfolders all disappeared from Thunderbird (they still exist, just do NOT show) and the gmail boxes increased by two more. I want to see the Yahoo Boxes of whci there are many. I do not care a whit about the Gmail boxes and want nothing more than a gmail Inbox and Trash at the very most. Now I cannot see any of my Yahoo boxes, have several empty gmail boxes. It's an e-mail nightmare! All I can think to do is to remove Thunderbird altogether and start over. I NEED my Yahoo Inbox. It contains important messages! How can I get them to reappear?
Similar Messages
-
Lightroom Mobile: I can't see any of my collection from the web.
I am able to see and sync my collections between ipad and Lightroom Library on mac, but i can't see anymore my collections from the web. Thus i am not able to share neither my collections with Friends. This is ongoing since 48hours .How to quickly fix this? Thanks
If you can see your Synced Collections in Lightroom Desktop, and you can see the same collections in Lightroom mobile on your iPad, and not see them in the web, I would ask you to double check that they are all logged into the same Adobe ID at all three locations.
-
Need help..I can't see any new email messages on my iphone or ipad. I can only see old messages. I sent something to my self. I see it in the sent box but not in my inbox
Delete your account and start fresh. You should be able to see the downloads on a fresh install.
-
All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?
Hi
I haven't even touched anything that I know of?
And You've not moved or emptied any folder on Your Hard Disk named
• iMovie Event's - or -
• iMovie Project's
Or - disconnected any external hard disk/s
As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
ELSE - If You are 100% sure that You didn't move them then
• Trash iMovie Pref and Cache files
• Run Repair Permissions - Disk Util tool
• Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
and may be all will work OK again
Yours Bengt W -
I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?
Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??
-
How can I see songs on my iPod from the new iTunes
How can I see songs on my iPod from the new iTunes. I used to be able to easily manage manually my music I cannot seem to find how to view music anymore although I figured out how to manually transfer.
iTunes: Syncing media content to iOS devices and iPod
-
How can I get rec'd text messages from the same subscriber not be appended
Hi,
Is there a way to configure the Apple iphone so that text messages from the same subscriber are displayed separately rather than appended to each other? In this way accidentally deleting one message wouldn't delete the entire history of messages from this subscriber.
When I launch the SMS service by pressing the green SMS button I am met by a screen that says Text Messages. On the left of this there is a button that says Edit and on the right there is one that is for writing a new message. Down the page are my messages all grouped by the originator of each messages. If I choose one I see that all messages from this source are present appended one after the other. There is also the option now to Clear on the top right hand corner. It is this Clear option I am worried about. If I choose Clear I am asked for a confirmation and then lo and behold as expected all my messages from this subscriber are deleted.
This is a work phone for support purposes and most of the texts will be from the telephone operator (i.e. the one same number) saying we have an email waiting to be read with a subject title giving a little description. I want to be in a position so that I don't accidentally delete the entire history of messages, say some evening when I'm tired or Monday morning if I 'm a bit asleep. Ideally I would prefer that each text message would stand alone in the Text Messages window irrespective of the originator and not be appended in a group fashion. Is there a way to do this?
Kind regards,
MThere is no way to do that on the iPhone. Messages will always be grouped into a 'conversation' based on the sender/recipient. Only Apple can change that behavior.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html. -
I can't see any new SMS messages without changing one of my options?
I got the BB Curve 8520 around a month ago. Ever since getting it, whenever I have a new SMS there will be a message indicator showing at the top. But when I go to the Message LIst, there are no messages. I found out soon after that to see any of my unread messages, I have to change an option.
So I have been doing that for the past month. I regularly receive messages, and automatically I click 'Options' and change ' Display Time' to either a yes or no. When I go back to the message list, all my unread messages are there.
I have not set up an email account. Thank you!Try this > Open your Messages folder > press the Menu Key > Options > General Options > Email and SMS Inbox and set that to SEPARATE.
Or what is the current setting there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My iPad 4 is connected with my yahoo email. Yester day, I suddenly could not see ant text in message box.
Quit the mail app completely. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Launch mail again.
Or .... Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Please could someone point me in the right direction?
Go here > Apple - OS X Lion and Lion Server - Up to Date Program
Then click "Redeem from the Apple Online Store"
If you have problems there, click here >
OS X Lion Hardware Up-to-Date Program - Step 1 -
How can i see what i have bought from the appstore?
hi, how can i see what apps i have downloaded or bought from the appstore.
thank youHi..
iTunes Store & Mac App Store: Seeing your purchase history and order numbers -
Please help me, i have forgotten my alternate email address and security questios, i can't make any purchase in app store, but i have already used the app store girt card, please help me : (
You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(87468) -
Can't download ANYTHING from the Appstore . Anyone else having a problem ?
You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I was trying to put more music on my phone, but iTunes said I had to update and restore my phone. The only reason why I update using my computer is because I use up too much space to update using wi-fi, and I'd rather not erase everything to be honest. I started around 5-ish on 1/12/15 and finished around 12-ish on 1/13/15. (I had to keep restarting my computer and phone to get the system update like the troubleshooting website suggested.)The last time I backed up my phone was about a week ago on 1/6/15. But now when I look at my text messages and pictures, everything ends at 1/6/15 as if I never used my phone since then. Honestly, it's really frustrating. I know that you have to back up your phone before updating and everything, but I just wanted to know if there was a way I can get all of my missing stuff back. Maybe I did something wrong?? I'm just hoping there's a way for me to get my pictures and messages back. I don't even really care about the update to be honest lol. Any suggestions would help!!
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
Hi,
My problem is that using an Intel video card (with KMS) after latest Xorg 1.8 update, I can't see boot messagges and the login console anymore.
I've just noticed that after last Xorg update I can't access anymore to runlevel 3 on boot.
I've got an Intel video card so KMS is enabled by default (and mandatory).
I always used SLiM as a display manager, configured through /etc/inittab to go to runlevel 5 on boot:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >& /dev/null
To enable runlevel 3 at boot, I commented the id:5:initdefault: and the x:5:respawn:/usr/bin/slim >& /dev/null lines and uncommented id:3:initdefault:.
Now, during boot, the last thing I see is Loading UDev modules..., then the screen becomes dark gray and I can't see any other boot messages (actually this appened also before, after xorg update).
The problem is that before slim started but now I can't see any login console.
I also figured out that typing my username, password and then startx, starts X normally, so the problem is just that I can't see the tty console anymore.
Once I am in X I can switch to ttys normally.
What can I do?
I just wanted to get rid of slim and start X automatically after console login but I can't see the console login!
I hope to have been clear enough, thanks for your help!
Last edited by rent0n (2010-07-04 11:36:38)rent0n wrote:
Well, it seems I spoke too early. It doesn't work as expected at every startup, sometimes I still have the black screen.
Now I'm trying with:
video=SVIDEO-1:d
that seems to work, but I just tested it one time and I'm starting to think that screen blanking happens randomly...
Any hint is more than welcomed.
After a few reboots, I can confirm this workaround seems to work.
This is weird indeed as I don't have any SVIDEO-1 interface listed by xrandr -q, but still.
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
TV1 disconnected (normal left inverted right x axis y axis)
The only problem is that now boot lasts a lot of time and, between UDev modules loading and disks checking, I have to wait for at least 30 seconds with a black screen and a central white dash flashing.
Anyone experiencing the same thing?
Maybe you are looking for
-
Error - While running Payroll Simulation After HR Patch Update
Dear Gurus, Below is the system Information OS : AIX DB : Oracle 10 g Current Patch Level : HR : SAPKE60471 (Old was SAPKE60453) Basis Patch Level : SAPKB70115 (Old was SAPKB008) Now at old patch level payroll simulation was running fine and with no
-
Value Type and Report Type in Report Painter Report
Is there a way I can get both characteristics WRTPP and RRCTY in one table? Or, can I work with two different tables in creating Report Painter report? I need to get the planned values of cost elements with record type 1 and value type 10 to show und
-
File.renameTo(File) doesn't change dirs on Linux?!
Hi All, I'm trying to change a file's name and directory with File.renameTo but it doesn't work. It says in the manual that changing dirs is O/S dependent, so i guess it doesn't work on Linux. Is it correct? if so, what can be done to change a file's
-
VLAN Override and Web Auth: How to overcome issues?
Hello I have been investigating if we can deploy vlan override and assign a user vlan via RADIUS, post authentication on a WRD SSID. Having read around the discussions, I can see that there are others who have wanted similar, but have been told that
-
I bought an iphone 4 in august of this year, i had to have another one sent to me because it was freezing up on me. The new phone i recieved is doing the same thing and I have a hard time getting the phone to charge. I didn't pay all that money for a