Can't see any software component in CMS

hi
i configuring EP6.0 JDI  i have done all the SLD configuration my DTR CBS CMS r working but when i try to make any new track i can;t see list of software components to choose to make track but i can see all these in  software components in SLD software catelogue.
please help to resolve this problem
thanks

Hi,
Please update the CMS by clicking on Update CMS button. This will ensure all that all SC are available in CMS also.
Regards
Sidharth

Similar Messages

  • Can't see created Software Component in CMS

    Hi
    I have created a software component in the SLD (NW 2004s SP2). Now i want to develop it. But when i try to add this software component to my track in the CMS, i can't find it. I suggested in an another forum post, i try to push the "refresh" button in the CMS but it doesn't help.
    Thx 4 help

    Hello Marc
    ...its very strange. Now i have the same problem as before. I think i solved it, but i'm wrong.
    There is a button labeled "synchronize dependencies", but no solution for my problem. I have create 2 software components in the SLD. One without any dependencies and one with 3 other software components dependencies. I made two tracks in the CMS and import them into my NWDS. Then i remember, that my defined dependencies are wrong. So i delete both tracks in the CMS. In the SLD i decide to delete one software component and edit the other one. I add my needed software components in the SLD to my custom software component. Now i create a tack again and want to add my custom software component, BUT there are shown both old software components in the table, where i can select/search my custom component. If i press the "synchronize dependencies"-button, nothing happened.

  • Sproxy: Can only see Basis Software Component

    Hi Experts,
    I am working on 7,4 dual stack PI.
    Recently done with all the configurations in PI .But now I want proxy communication with ECC.
    For this I created one H type and one G type RFC destinations in ECC to fetch ESR object from PI.
    For now I have create only one SWC in SLD of PI and imported it in ESR .Created one Namespace under that.
    But ,when I run SPROXY in ECC, it shows only SAP BASIS 7.4 software component and not the other SWC of ESR.
    Do we need additional configuration for each of SWCV to get displayed in ECC SPROXY???
    I refered the IDES system , in that too I noticed one thing that , out of all the SWC created in ESR of PI only few are diaplyed in IDES ECC SPROXY
    why so?
    Thanks in advance..

    Hello
    What is the NetWeaver release of the ECC system and the SP release?
    See note 1528587 PI ESR Content Objects are not visible in SPROXY, for a description of how/why this can occur.  But it may not be the same in your case.
    Regards
    Mark

  • Both in safari and Facebook app. Likewise, can't see any Facebook contact pictures on contacts app. my softwar is up to date. my Facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks

    both in safari and facebook app. Likewise, can't see any facebook contact pictures on contacts app. my sofware is up to date. my facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks like html script texts. In facebook app, there are texts but no no images shown. thanks.
    iPad, iOS 6.1.3

    Where did you get the device?  Is it possible that it has an IT policy on the device blocking Facebook and/or Facebook options?  Look in Options >Security Options >General Settings (actual menu paths vary with OS version) and see if there is any reference to IT policy.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Crashes so installed recent update now I can't see ANY of my adjustments

    Aperture crashed a lot so I updated with recent software update. Now I can't see ANY of my adjustments on any of my photos. Also if I want to make new adjustments the presets do not show preview. PLEASE HELP!!! This is slowing my progress down!

    I reinstalled Prokit 7 upgrade and it did not fix the problem.
    I put my fonts in user/library/fonts, where I have always put them and when I am in any Creative suite app. the only fonts visible in the font list are open type and TT fonts. No type 1 fonts appear in the list even though I have them in the fonts folder. They do not appear in fontbook either.

  • HT2518 I did the all of it and it transfered but can't see any of it even my iTunes library still empty where is al my data?

    I transfered my pc to my Mac but I can't see any pictures or music mi iTunes library is empy!  What can I do?

    1 - iPhoto never forces you to upgrade - any upgrade of the software is initiated by you
    2 - what version of iPhoto did you have? What version did you upgrade to? What version of the OS do you have?
    3 - what exactly happens when you launch iPhoto?
    4 - with no backup it is just a matter of time until you lose all of yoru files including your photos - thing do happen and with no backup you are 100% guarenteed to lose everyhing sooner or later
    as a wild guess backup, depress the option and command keys, launch iPhoto and rebuild your iPhoto library database
    LN

  • Can I assign one software component to multiple products

    Hi
    Let me know Can I assign one software component to multiple products if so explain me in detail.

    See this
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/content.htm
    <i>4. To view details about a software component, choose the Software Components tab.
    5.From the Software Component dropdown box, select the software component whose details you want to view.
    A table with software component versions appears.
    6.Select the software component version whose details you want to view. Choose one of the following tabs:
    General
    Displays general details about the software component version.
    Products
    <b>Displays the products, which contain the software component version</b>.</i>
    At this location u can see multiple products for one SWC
    Regards,
    Prateek

  • After iTunes 10.3.1, my Apple TV 1st gen. can't see any shared iTunes libraries!

    Ok, everything was working fine until iTunes 10.3 came into the scene. Post 10.3 / 10.3.1, my Apple TV 1st gen can't see any shared iTunes libraries...

    Hello everyone
    I have fixed it! The problem was that Apple TV had tried to connect to the computer so many times the Virus Barrier X6 had decided it was a malicious attack and blocked the IP address.
    I fixed the connection by adding the IP address to a trusted list within the FireWall rules.
    To do the same follow these instructions
    Go to Virus Barrier X6.
    Click the 'Anti-Vandal' Tab at the top of the screen.
    Click 'Blocked Addresses'. Select the IP of Apple TV (you can find this IP address through your router software). Click the '-' sign at the bottom of the left hand column. If the Apple TV IP address isn't listed then you have a different problem!
    Click 'Trusted Addresses'. Click the '+' sign at the bottom of the left hand column. Add the IP address of Apple TV in the pop up box, select 'permanent', add any notes you want to and then click 'OK'.
    Turn on Apple TV and it should all be working fine (assuming that your 'Home Sharing' setting are all on and you are connected the the network!).
    Hope that helps
    M

  • HT201240 i forgot my password, and can't update any software until I reset it...

    I forgot my password, and can't update any software until I reset it, but I need my old password to change it.  The online help page from apple wasn't helpful, so I'm kinda stuck....what should I do?

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password,
         and OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

  • Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

    I am looking in this table with SQLPlus and TOAD and can not see any rows.

    Hi Hussein;
    First I ran:
    select fu.user_name, fr.responsibility_name
    , fu.user_id, fr.responsibility_id resp_id
    , furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
    from apps.fnd_user_resp_groups furg
    , apps.fnd_user fu
    , apps.fnd_responsibility_vl fr
    where furg.user_id = fu.user_id
    and upper(fu.user_name) = upper('&User_Name')
    and furg.responsibility_id = fr.responsibility_id
    order by 1, 3
    Passing in SYSADMIN
    Taking this row:
    SYSADMIN,General Ledger Super User,0,20434,101,0
    I ran:
    I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
    I still get no rows returned.
    Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

  • How do I delete photo ALBUMS from my iPHONE 4? I sync via icloud and I can not see any folders selected in itunes. I searched the internet and basically there is no one who has the answer to how you delete the iphone photo library and misc albums

    how do I delete photo ALBUMS from my iPHONE 4?
    I sync via icloud and I can not see any folders selected in itunes.
    I searched the internet and basically there is no one who has the answer (so far)
    to how you delete the iphone photo library and misc albums
    I have also had every iphone and I am not stupid.
    charles altman

    Replying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....

  • TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

    I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • Several months ago I kept getting prompted to "update" my iphoto library.  I finally gave in and clicked on the update button and EVER SINCE THEN,  ALL of my photos have been 'grayed out' and I can't see ANY of them unless I click on the photo and open it

    Several months ago,  I kept getting prompted to 'update' my iphoto library.  When I finally clicked on the 'update' button,  it 'greyed out' ALL of my photos.  Now ALL of my photos are grayed out and I can't see ANY of my pictures unless I click on each grayed out photo individually and open them,  ALL of the thumbnails are greyed out.  It is THE WORST!!  I have no idea how to fix this problem and its been MONTHS AND MONTHS of *** pain.  Anyone??  Please help!!!
    Thanks so much!!!

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    and please tell us what version of iPhoto and of the OS you have
    LN

  • I set up Firefox sync from my old computer. This has had its hard drive replaced and been sold. I now want to retrieve the information and got my bookmarks on my new computer. I can't see any way to do this!

    I set up Firefox sync from my old computer. This has had its hard drive replaced and been sold. I now want to retrieve the information and get my bookmarks on my new computer. I can't see any way to do this!
    Help please

    To build on the second option provided by The Edmeister make sure that you have your Sync Key, if this is not the case Firefox Sync will not help you (data is encrypted with that Key).
    Finally, if the last sync happened long time ago, it may be the case that your data is not on the servers anymore. Firefox Syn wasn't designed as a back up service.

Maybe you are looking for