Can't see anything in ESB Control

Hi!
I can't see any systems in ESB Control (no DefaultSystem, and no BPELSystem, Fulfillment or OrderBooking after succesfully deploying soademo_101310_prod).
(There are some JavaScript errors too: URLObject is not defined)
(WinXP, SOA Suite 10.1.3.1.0, Oracle XE)
Please help!
Thanks in advance,
Patrik

I've done it & reinstalled SOA Suite, now it works, thank you!
(And there was some issue with the firewall configuration...)
But my other problem still holds: the demo application (soademo) doesn't run.
Please see at Re: The demo BPEL application does not start in Oracle AS...
Thank you!

Similar Messages

I can't see anything in Mission Control with OS X 10.8.4 update

So I installed the new update for Mountain Lion the other day (10.8.4) and before when I went to mission control all the things I had open would show up in their windows; but now they shrink to nothing. The only one that goes into its normal view (little window) is iTunes, all of the others disappear (or just show a very very thin line). Is this just some kind of bug... or what?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHero

If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )

Can't see anything in external drive after renaming a folder

Hi all,
I can't see anything on my external drive after renaming a folder. I have the drive set up as a Windows drive with access through the volumes folder (I had to transfer large amount of files from a PC and have it be readable on my MacBook Air); I read a FAQ to set it up a few months ago and it has been working fine since then. I saw the same issue come up with a PC HD on a PC, but the solution was for a PC. I don't see anything else like that in the support community (or if it's there, then I'm not searching for it the right way). There is no partition on the drive and it still shows as having the same amount of data written on the drive as before the accident.
Many thanks in advance!
anj

If you upgrade the your router, it would be the firmware that will be upgraded. For more information regarding upgrading the firmware, try this link.
For your external drive, you might need to map the drive again with a different name.
Hope this helps.

Please help I can't get my MAC G4 garageband to talk to my M-Audio interface correctly so I can hear see anything register on Garageband

I can't get my MAC G4 garageband to talk to my M-Audio interface correctly so I can hear see anything register on Garageband

I have the M-Audio 1 n 1 interface and yes the Instrument panel shows up when I open garageband but i can't get audio to play outboard i see the indicators light up and the volume pids moving but no sound i can hear

Phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please

phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please

First you can try to force reboot your phone. To do this:
1. Hold down the sleep/wake button and home button simultaneously.
2. Let go when the Apple logo appears and the iPhone is booting up.
If that doesn't work, you might need to hook the phone up to your computer and do a full restore through iTunes.

IPHONE 4 Can't See Anything.

My iPHON 4 work's but I can't see anything! The birghtness is all the way up, but nothing is showing. When I go to lock it, it would flash real quick, but then I can't see anything again. I have to put the phone on a slant to try and see where everything is. HELP!

This may be a result of liquid damage.
Which unfortunately voids any warranty made by apple.
You should book a Genius Bar appointment at your nearest apple store for a proper examination.
What you have described to me sounds like what happens when the moisture sensors on the iphone get activated rendering your iphone next to impossible to use.
If you are able to book an appointment at the genius bar by going to your nearest apples stores website.
one question for you.
If you shine a bright light on the display do see it faintly if so it is usually what happens when the phone has liquid damage.
But see a Genius first just to be sure. It could be something else

I have a problem with my voiceover on my iphone4s. when i activate it i only hear the voice command but can't see anything. plzzzz...help me.

i have a problem with my iphone 4s voiceover. when i activate it i only hear the voice comman bt can't see anything.
Plz...give me your best advice so i can correct my problem thank much.

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

My iPhone 5 screen is completely black. I can hear it working (you can hear Siri if you push the home key) but I can't see anything.

My iPhone 5 screen is completely black. I can hear it working (you can hear Siri if you push the home key) but I can't see anything. I've tried a hard reset but that hasn't worked. Any other ideas? I have a call in to get a replacement but it won't come in until next week so until then I don't have a working phone!

Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons.

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367

Sometimes when I quit Firefox, it makes my Mac screen turn solid blue. The computer does not crash, but I can't see anything. Help please!

Sometimes when I quit Firefox, it makes my Mac screen display solid blue color. The computer does not crash, but I can't see anything. Opening programs, nor hitting any shortkey makes the display work again, so I have to shut down.
I am using Macbook pro, OS 10.6.8, 4 GB memory, 2 ghz intel processors i7. This has happened about 6 times in the last 3 months. Seems to be getting more frequent. Sometimes happens after using Netflix streaming video, sometimes after browsing sites that don't play video. I frequently use Pandora, but have Firefox set to dump cache, memory, etc. after each use.

Have you tried a safe start by holding the shift key when you boot? If that works, and it can take a while to complete, see if a regular boot now works. If it does, you need to free up space on your hard drive.
If a safe boot doesn't work, you need to either boot from an OS X DVD or go into target disk mode to connect via firewire cable to another mac to free up space on your hard drive. You need 5GB min, with 10% to 15%, or more, better, for systems usage. If you have a backup, move some data files to it, erase them and empty the trash.

My Iphone 4s was not dropped and when I went to use it the screen was completely covered in blue and red lines I can not see anything is there something that I can do to fix it?

The screen is blue striped and when you try to reset it goes to blue and red. Can not see anything HELP

Bring the phone to Apple for evaluation. Sonds like a hardware issue.

HT6154 Accidentally lowered brightness on my 5s can not see anything or make it brighter

Accidentally lowered brightness on my 5s can not see anything or make it brighter

Settings > Wallpaper & Brightness Adjust the brightness slider.

Can't see anything in numbers

I installed an old keynote and numbers 08 disc recently on my new computer (not pages, I have the updated one and no problems)
when I open the program and any file/new template, everything is white. like i can't see anything without highlighting it and changing font color doesn't work. i cant even see the numbers gridlines. I have no idea what this is. help?

Downloading the updater can't tell you that it doesn't find the application.
The process give you a dmg file.
Keynote_404.dmg and / or Numbers_103.dmg
They are stored in your Download folder.
To apply each of them, you must double click the dmg file which will install a disk image on your Desktop.
Here is one of them :
Then you must double click the pkg file.
To apply, it requires that the app is stored in the folder Applications:iWork '08
If you moved it you must restore the app where is MUST stay.
This requirement apply to Keynote too.
Yvan KOENIG (VALLAURIS, France) lundi 21 janvier 2011 18:55:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Just bought new replacement iphone from apple store and less than two hours later, the screen went blurry and I can barely see anything. Phone still functions fine though.

Just bought a new replacement phone at the apple store and as soon as I got home, vertical lines came up through the screen and now it's extremely blurry. All the functions of the phone still work fine and I really can't see anything except a small part of the screen at the top. I called the apple store and he told me to put the phone in recovery mode on my computer and the restore and update it. I did this and I can tell the phone has restored yet it is still extremely blurry and I can't see anything to type it in. Is there anything I could do with this? The apple store is over an hour away and saving another trip down there would be great. Thanks

Bad luck. Take ti back.

Can't see anything in ESB Control

Similar Messages

Maybe you are looking for