Can't see anything in iWork 08 after installing it on my new MacBook Pro

I recently reinstalled IWork 08 in my new MacBook Pro.  I was using it on my old MacBook Pro, which my wife now has.  When I open any of the programs, everything is white. If I double click any text that may be in the file, it can be viewed as highlighted.  But otherwise everything is white.  My Keynote presentations don't display anything; no themes, no backgrounds, nothing.
Could this be becasue it is still installed on my old machine?

If you installed iWork from the disk, did you run the updates?
If you copied the app over from the old Mac you would also need a copy of the iWork '08 folder which is in Macintosh HD/Library/Application Support

Similar Messages

  • After installing iOS 8 on my MacBook Pro I've been unable to backup my laptop to Time Machine - any advise?

    After installing iOS 8 on my MacBook Pro I've been unable to backup my laptop to Time Machine - any advise?

    I would really like to know how you managed to do that seeing as how the MBP is not capable of running iOS
    iOS is only for mobile devices such as iPhones, iPads and iPods
    The MBP uses OS X instead
    Maybe once you get your story straight we can help you

  • After installing windows 7 on my macbook pro, i cannot access my mac

    After installing windows 7 on my macbook pro late 2011, when I try to access the mac side of the computer it just stays in "thinking" mode and will not open up the mac. Windows side opens and works ok.
    I only know enough to try to uninstall windows 7 then hopefully open the mac and possibly reinstall the windows 7.
    PROBLEM: I only know how to uninstall windows 7 from the mac side (in the bootcamp) BUT cannot access it??
    Any help. Thank you
    <Edited By Host>

    Hi craig1045,
    It is possible that the file system for the volume containing the Mac operating system, or the OS itself has become damaged. I suggest that you follow the steps in this article to try to repair them -
    A flashing question mark or globe appears when you start your Mac
    http://support.apple.com/kb/TS1440
    Specifically -
    If your installation of OS X needs repair
    If you don't see your startup disk displayed in Startup Manager, or if you see a prohibitory symbol (⊘) appear, your startup drive may need directory repair, or OS X may need to be reinstalled.
    If you only see a disk named "Recovery HD" in Startup Manager, select it instead. You can also start from OS X Recovery by holding down Command and R on the keyboard at startup.
    From the Utilities menu, choose Disk Utility.
    In the Disk Utility window that appears, select your startup disk (usually named "Macintosh HD") from the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your OS X startup disk.
    After repairing the disk, try to start up normally. 
    If none of these steps resolve the issue, start from OS X Recovery and reinstall OS X.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How can I transfer all my music from my old iPod to my new MacBook pro? My old computer is gone.

    How can I transfer all my music from my old iPod to my new MacBook pro? My old computer is gone.

    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
    i-devices are intended to by synced with iTunes (iTunes --> device), not transfer things to iTunes.  For transferring songs from i-device to computer see commercial software utilities (with the exception of iTunes purchases). Examples (check the web for others; this is not an exhaustive listing):
    Senuti - http://www.fadingred.com/senuti/
    Phoneview - http://www.ecamm.com/mac/phoneview/
    MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
    Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.

  • HT1296 How can I transfer all my photos from my Ipad Mini to my new MacBook Pro

    How can I transfer all my photos from my Ipad Mini to my new MacBook Pro
    I am facing problem while I connect to my iPad mini with MacBook Pro , it only sync photo from its taken by and from it camera roll only. It doesn't sync all the images... Like my all albums. All photos in library....

    To copy photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.
    You should also be able to copy albums that you've created directly on the iPad via apps such as Simple Transfer (though I haven't tried it)

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.

    I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.

    Migration should never be done with any Adobe program.
    If you have done Migration, you have to UNINSTALL first (if even possible) and then download Adobe Creative Cloud Cleaner Tool and run that also. When this is done, restart your computer and install the programs from an original Adobe Installer.
    Other question is, if your OS is supporting that version. You can try it, it is not officially supported, but it might work.
    But CC will work, upgrade to CC2014 (without additional cost), use that as it is better anyway.

  • Can't see anything in external drive after renaming a folder

    Hi all,
    I can't see anything on my external drive after renaming a folder. I have the drive set up as a Windows drive with access through the volumes folder (I had to transfer  large amount of files from a PC and have it be readable on my MacBook Air); I read a FAQ to set it up a few months ago and it has been working fine since then. I saw the same issue come up with a PC HD on a PC, but the solution was for a PC. I don't see anything else like that in the support community (or if it's there, then I'm not searching for it the right way). There is no partition on the drive and it still shows as having the same amount of data written on the drive as before the accident.
    Many thanks in advance!
    anj

    If you upgrade the your router, it would be the firmware that will be upgraded. For more information regarding upgrading the firmware, try this link.
    For your external drive, you might need to map the drive again with a different name.
    Hope this helps.

  • How can I move my itunes library from my old computer to my new macbook pro. It contains purchases music and music I have downloaded from CDs.

    How can I move music from my itunes library on an old computer to my new macbook pro without having to buy another application? Some of this music is purchases in itunes, some is downloaded from CDs. I need a easy fix. Not computer genius.

    See here: iTunes: How to move your music to a new computer
    B-rock

  • Can't install windows 8 on new macbook pro retina display.

    I spent my afternoon trying to install Windows 8 Pro on my new Macbook Pro with retina display. I get fairly deep into the installation process using bootcamp when I get a windows message that says something to the effect that windows can't be installed because the hard drive is not formatted in NTSF format. And that is the end of the line.

    Welcome to Apple Support Communities
    It's normal. Boot Camp Assistant formats the Boot Camp volume in FAT32 because in the past it supported Windows XP and it could use FAT32. This changed with Windows Vista.
    The only thing you have to do is to choose the BOOTCAMP partition in this step, and select "Drive options (advanced)". Then, press "Format" and it will be formatted into NTFS, so press Next and the installation will start.
    See the Apple's guide > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

  • Can I have my I tunes library on my iMac and my new MacBook  Pro

    I have just purchased a new MacBook pro retina display however my iTunes library is on my desktop IMac. Is its possible for me to see the  same library on the 2 devices and if so how can I do this?
    Thanks

    Hi,
    That is correct.
    You can download your music on to your MacBook but if hard drive space is an issue, you may wish to consider iTunes Match. http://support.apple.com/kb/ht4914.
    You set up match on your main computer and once this has been done you can sign into iTunes and match on your MacBook. You will be able to stream music anywhere you have a wifi connection.
    Jim

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • How can I move the aperture program from my old Mac to my new Macbook Pro?

    I have Aperture 3.2 on my old Mac laptop and would like to know how to move it over to my new macbook pro retina laptop.  I tried to just move it from my external hard drive, but that didn't work. Can I use the migration assistant to transfer this and only this program to my new laptop? 
    Thanks,
    Shirley

    Apple Pro Apps like Aperture really do best if installed from the original media that hey were bought on. Trying to migrate Aperture can lead to a lot of frustrating problems.
    The libraries can be copied over just as you would any file but the application itself needs to be installed.
    How did you purchase Aperture? If you got it in the Mac App Store then all you need to do is log into the MAS from the new computer using the same Apple ID you used to buy Aperture and download it.
    If you bought it on DVD you will need to install from those and then run software update to get to the latest version. Remember if you bought it on DVD you will need the original serial number that was included in the package. Also if this was and upgrade from an earlier version (1 or 2)  you will need those serial numbers also.
    regards

  • Can't install FCP on my new MacBook Pro

    I just realize that I can't install FCP on my brand new Macbook Pro. Does anyone knows of any solution that would let me install FCP. According to the notes FCP will not install on Intel Core Processors.

    It would be useful if you -
    A. told us what version of FCP/FCS you are trying to install
    B. told us the error messages you received
    In the meantime, Final Cut Pro 5.0 and earlier are not supported on intel macs. Time to upgrade. If you have a regular retail version of FCP, the upgrade price is $299. Academic and Not For Resale versions do not qualify for the upgrade.
    x

  • Cant start mac applications after installing windows 7 on my macbook pro

    cant start mac applications after installing windows 7 on my macbook pro

    When booting your computer press and hold the option key. When the boot manager appears select OSX. When OSx boots select and run your "mac application".

Maybe you are looking for