Can't see audio wave in viewer after FCP5 project updated into FCP2

After updating my project from old FCP 5 version running on Tiger to FCP2 running on Leopard, I can't see the audio wave picture inthe viewer window. Is there an explanation for this?
Thanks assistance.
Ray

You can try clearing the waveform cache in your project folder. Press Shift Q to open the System Preferences window. Look for the location that is set as your Waveform Cache location, then use the Finder to navigate to that folder. Remove the cache files from there, and then try relaunching your project to see if that solves your issue.

Similar Messages

  • Can't see audio waves in arrange

    Hi guys,
    The waves of my audio files in arange don't show.
    Instead there is a flat this line in the middle of the files, as if it were an empty audio file.
    When i double click a sample it opens up in sample editor where the waveform shows up fine.
    Its just really annoying to work this way, cuz i cant place my samples correctly on a grid
    Does anyone know how to make em show?
    cheers,

    Apart from using the key commands for waveform zoom, try this.....

  • HT202157 Can't see rented or purchased movies after the AppleTV update. Help?Hi

    Hi
    We updated our AppleTV a couple of days ago and we tried to rent a movie last night but failed. I am able to go into the Movies section, find the movie I want, even see the preview in perfect condition. The problem arises when I want to rent. I get a window that asks me to: rent and see now, rent and see later or cancel. I select "Rent and See Now", it moves to a "Loading" page and then pops back to the movie page without having rented it. I tried it with several movies and it didn't work. I also tried it with my purchased movies and I get the same exact error when I try to play them.
    All other features on my AppleTV seem to work fine, YouTube, iTunes Festival, for example. I have tried disconnecting my iTunes account and connecting it again but that didn't work. Tried rebooting the AppleTV as well but that didn't help.
    How can I get it back to working?

    I have been having the exact same problem, and I am outside of the United States but my iTunes account is from the United States.
    I have never had problems streaming purchased movies, shows, or music before.
    Now I can see all that has been purchased and even select them.  However, when a movie or show is played, it shows the spinning wheel for a couple seconds and reverts back to the movie/show details screen.  When music is attempted to be played, a "content not found" error occurs when a song is selected.
    Interestingly, movie previews can still be watched just fine.
    Also, if I restore or reset the Apple TV I can immediately watch one move or show video, but the second time this is attempted it reverts back to the original error.
    This means that I have to spend 4 minutes resetting the Apple TV just to watch something.
    Apple support was not able to resolve this.
    Netflix and other apps work just fine.
    This also just happened a couple days ago after I updatet my Apple TV

  • Can't import audio files in FCP after snow leopard update

    i've recently updated to snow leopard. and i'm running Final Cut Pro 6.0.6
    i opened a .fcp project i created a long time ago. i tried to import a .aif file and final cut crashes. i converted the .aif file to a .mp3 file. tried to import it, and final cut crashed.
    i then went and deleted the preference files for final cut pro, reopened final cut, tried importing both files again, it still crashes.
    does anyone have a legitimate answer for why this is happening?

    BenB wrote:
    1st, FCP does not officially support MP3 audio files, so don't even use them. I'm running FCP 7 on Snow Leopard, no problems with audio files.
    1- How are you encoding them? What software is creating these files?
    2- Are you running on an external FW800 drive?
    3- How much RAM are you running?
    And as my final observation is, NEVER run Final Cut Pro 6 on Snow Leopard! Huge no-no! If you upgrade to Snow Leopard, only use FCS3. I've updated lots of systems for my students and clients, and I've seen lots of FCP6 on SL problems.
    Message was edited by: BenB
    I agree that you shouldn't use MP3 files with FCP, the manual tells you that somewhere If I recall properly, but it shouldn't cause Final Cut to crash, at least that has never been my experience, it has just caused a skipping problem, or not playing the complete song.
    I don't really understand wht a FW800 drive or the amount of RAM have to do with it, it would sure be interesting to hear your comments on that.
    However, in all due respect, to make the statement that one should NEVER run Final Cut Pro 6 on Snow Leopard seems pretty "out there" would you be so kind as to provide your rationale for such a drastic statement as that. Has there been anything official from Apple along those lines?

  • Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

    Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
    Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
    Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
    If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • Why can I see photos in photo view, but now event view?

    Why can I see photos in photo view, but not in event view. The event shows up, but when I open the event, it says there are no photos in the event. The only way I can actually open a photo in the event is to be in photo view, and open the photo from that view.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Can't find My Photo Stream album after iOS 8 update

    Can't find My Photo Stream album after iOS 8 update. Is anyone else having this problem.

    That album, My Photo Stream, is no longer used.
    Instead, look in "Recently Added" within Albums, and also within Photos in the various timescale views. Both places should contain photos taken by any of your devices.

  • I can's see my Ipod in Itunes, I have tried updating Ipod & Itunes

    I can't see my ipod in itunes, i have tried, updating ipod but it wont let me. i have tried repairing, removing and re-installing itunes but still no luck.
    please help????

    I answered on your other thread....
    iTunes Does Not Recognize Your iPod
    Does Windows see the iPod?

  • How can I get my printer to work after a Yosemite update?

    How can I get my printer to work after a Yosemite update?

    Hi there michaelfromepsom,
    You may find the printer troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X 
    -Griff W.  

  • Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

    Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

    leonsee94 wrote:
    Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ?
    You cannot see photos backed up in iCloud on your computer.
    Camera Roll photos backed up to iCloud are still in your Camera Roll on your iPhone.
    You need to regularly sync the photos to your computer. (then you can see them on your computer).
    -> http://support.apple.com/kb/HT1296
    then delete them from your Camera Roll.
    You can sync the photos you want on your iPhone back to your iPhone using iTunes.
    -> http://support.apple.com/kb/HT4236

  • Can not restore i phone 3 G after i tune update, can not restore i phone 3 G after i tune update

    can not restore i phone 3 G after i tune update, can not restore i phone 3 G after i tune update

    Search Google for "iphone 3g ipsw" (does not matter which one in your case, just need to restore your phone, then can do whatever).  Open iTunes with your phone connected.  Shift click on "Restore" (Apple click for Mac) and choose the IPSW file you downloaded.  That is called a manual restore.  Should help you out.
    BF

  • I can not see my waves and i cant refresh the over view

    why can i not see my waves it happend out of no where and right now im stuck it came back for a seconed when i refreshed my over views but it wont let me afgain

    One possibility:
    In Logic's  Preferences/Audio/Devices..
    Make sure "Recording Delay" is set to zero.
    If it's not set to zero why was it changed?

  • Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

    So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
    As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
    So, what happens is this:
    1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
    2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
    3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
    4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
    Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
    Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
    I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
    Mandatory system info:
    Windows 7 Professional SP1 (64-Bit)
    Intel i7-3820
    32GB RAM
    Nvidia GTX 980 (350.12)
    Premiere Pro CC 2014.2

    Update:
    I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
    Pretty bizarre.
    The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

  • How can I see Audio CD?

    So I am using iTunes 11.04 on Snow Leopard and the thing is when I insert an audio CD I can't see it.
    I cannot see it on library or anywhere. My MacBook shows that I have CD inserted and when I double click on the first track it imports it to my iTunes library and plays it, but I don't want to import the CD.
    How can I see and listen to the audio CD I inserted? On the last iTunes version it was on menu side, but there's no menu side anymore.
    Basically, where do I have to click to listen to my audio CD?

    Hi,
    Go to main menu > view > select "Show Sidebar"
    Jim

Maybe you are looking for

  • Difference in reading a text file in Windows & Unix

    I have a code which is working fine in windows but is stopping after reading the first line of a text file in Unix. The code is something like below:- declare file_handle text_io.file_type; /*running form*/ filename varchar2(60); v_line varchar2(200)

  • How to append ALV grid output to LIST output

    Hi, I am working with Basis AUDIT MANUAL report for which i have to integrate around 50 standard transactions (SM37,SM35...etc) output and make it into one single report. On execution of my report i have to get all the 50 transaction outputs sequenti

  • Scale image from small to large(r) without losing resolution

    Does anyone know how I can create a "scale action" of an image on a slide from small to large without losing the resolution of the image. Now, when I reduce the size of an image as a starting size and use Scale from the inspector to scale the image t

  • Running Total Grouping Formula

    I have a running total condition that I need to summarize the field CAWP.BAC. I would typicaly evaluate this total for change of group 4 and reset on change of group 3. I need to condition the evaluation for ".900" in {CAWP.WP} but i also need to eva

  • Best option/way to setup General VM box

    We have a UC560 with about 50 users.  Most users have personal VM but a few will not.  We want to set up a GVM box and set up an indicator on a line button for all phones.  We have tried using the floating extension method but then the line button sh