Can't see available WLAN Connection on Tecra A5 but ok with Tecra M5

Hi,
I have the following problem:
I have a DLink Wireless Access point (DWL-3200AP) configured in my office.
On my laptop, I can see my WLAN and I'm able to connect with my Tecra M5.
I can see the WLAN on the configfree graphic tool.
Now the problem .... I bougth a Tecra A5 for my boss, everything is working fine ... Radio is active ...
Wireless card OK ... BUT I can't see the WLAN ... can't find it ...
I checked everything but I have no idea why ...
Does someone can help me ?
Thx
Math.

I would suggest checking the router settings.
In my knowledge many WLan routers support a hiding WLan option.
In such cases the WLan is not visible and you have to know the name of the WLan to searching it.
I think you know the name of the WLan therefore I would recommend entering the Wireless Network connection properties and then choosing the Wireless Networks tab.
There you can Add the preferred networks. You have to enter the WLan name and the encryption.

Similar Messages

Can one apple base be connected to another apple base station with ethernet?

Can one apple base be connected to another apple base station with ethernet?

Yes, it would be called a roaming network.
See the Roaming network here:
http://support.apple.com/kb/HT4260

I can't see any wrote on firefox page. But when open safe mod (with shift because there is no wrote ) firefox run normally.

i can't see any wrote on firefox page. But when open safe mod (with shift because there is no wrote ) firefox run normally.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

The charging cable now longer fits all the way in the charging port. I can't see if any lint is in there, but if there is how can I get it out?

the charging cable now longer fits all the way in the charging port. I can't see if any lint is in there, but if there is how can I get it out?

Go to the Music section of your Library (very top-left corner) and see if your songs are there. The "Purchased" playlist may have been deleted or gotten corrupted, but if that happens it's not a big deal because your music should still be in your main Music Library.
If your music is NOT in the Music section of your Library, then go to the iTunes Store homepage and find the Quick Links list on the right side. At the top of that list, click Purchased and you can redownload all of your previous content that you might have lost.

My iPad shows the apple logo for 5 seconds while charging then shuts off for 10 seconds then shows the apple logo for 5 seconds and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off. Can anyone help?

The apple logo appears for 5 seconds then disappears for 10 then appears for five and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off completely. A laptop with iTunes isn't enough to power it up. Can anyone help me fix this?

Awesome. This is the iPhone 4 discussions! Have a nice day

New iMac can't see Laserwriter Select connected to a PC on same LAN-- why?

I've just returned to the Mac universe after a five year hiatus. When I discovered how well Macs play with PCs and Unix these days, I decided to come back.
There's just one issue: I can't print to my Laserwriter Select 360, connected by parallel port to a Windows XP Pro PC on my LAN. My new iMac doesn't see the printer at all. The imac does see the PC's workgroup in the Network Neighborhood, and I can mount the shared volumes of that PC on the mac with no problem, so the Mac can talk to the PC for filesharing, anyway. (smb:// address used)
Applecare has no clue why I can't see the printer. They told me to turn on Windows Sharing and Print Sharing, but that had no effect. The Windows machines on my LAN can all see and print to the shared Laserwriter Select 360, no problem. They're all running Windows XP pro, latest patches.
The iMac of course has the latest Tiger. All machines are on my internal subnet 192.168.0.*.
I just got a new cartridge for the Laserwriter, and there's no reason to retire it-- that printer works great. I just can't believe/accept that the iMac can't be made to print to an Apple printer! (Also, I've heard that appletalk->ethernet bridge solutions are flaky so that's not an ideal route).
Any/all ideas welcome.
imac g5 Mac OS X (10.4.3)

Here's the result. The PC is on 192.168.0.2, and the iMac was assigned .18 by DHCP.
I just tried adding a lexmark printer to the PC (over USB) to see if there might be some difference. The other windows box on the lan sees the LexMark same as it sees the Laserwriter (and both show up in the output of smbclient below). Needless to say, the iMac doesn't see the LexMark either.
Thanks for your help with this one...
will-kesslers-imac-g5:~ willkessler$ smbclient -NL 192.168.0.2
Domain=[WILLPC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Sharename Type Comment
My Documents Disk
IPC$ IPC Remote IPC
print$ Disk Printer Drivers
SharedDocs Disk
AppleLas Printer Apple LaserWriter Select 360
Downloads Disk
My Pictures Disk
ADMIN$ Disk Remote Admin
C$ Disk Default share
Printer Printer Fax via eFax 3.5
LexmarkX Printer Lexmark X63
session request to 192.168.0.2 failed (Called name not present)
session request to 192 failed (Called name not present)
Domain=[WILLPC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Server Comment
Workgroup Master
--------- -------

MacBook Pro can't see MY wifi connection

Hi all, Ok this has been bugging me for some time now, I've had a Macbook for around a year now and have notice that with some wifi routers my macbook can't see them until I reboot the router I'm trying to find. This can be most annoying and is beginning to become a problem, my iphone and ipad can see the wifi router but my Macbook can't unless I reboot the router and then I mostly get a connection (although this is getting worse as i have to reboot the router more often) but if I leave the connection i.e turn off the MB or leave the house on returning I have to reboot the router to get connected again. I have made a few enquires in web search engines but haven't found anything of much help and the problem is still here. At first I thought it could be my router but this has happened on a few routers of friends that I have tried to connect to, although i can see lots of other connections so it shows that the MB can find routers but not all. Is anyone else having this problem or does anyone know a way to fix this?
Cheers

Hi guys,
I personally figured it out on why this problem occur, well let me just hit to the point.
What happens is that the router of the wifi channel is being changed automatically or someone might accidentally changed it. MBP can't detect wifi from certain wireless channel. So, we have to change the channel of the router wifi channel that may be detectable by your MBP.
THE SOLUTION -
1. Connect to the wifi from a active device to the router wifi that your MB can't detect or use Ethernet cable to get connected.
2.Once connected, access to the router wifi menu by entering the ip address on your net browser, eg:192.168.2.1
3.Then go to wifi setup or menu, and you may come across the wireless channel.
4.Switch the channel from any numeric to numeric that the router wifi can make your MB detect it.
eg: Wireless Channel - 6 (change it to -->) Wireless Channel - 11
5.Save the settings for the router wifi, exit, restart your MB and HAVE FUN!

Can't see AE when connecting to a wireless network

Hi there,
I'm having problems joining my AE to an existing wireless network. I've configured the AE using the Airport Setup Assistant (I chose the 'setup new base station' option, and then 'connect to current wireless network'). The AE is glowing solid green. But, I can't see it at all in my Airport Admin Utility, or in the Airport status icon in my menu bar.
Can anyone suggest what I should do?
iBook Mac OS X (10.4.5)

Sorry for a tardy reply but I've been out of the country. I'm a very basic guy so whenever I have experienced anything similar to your situation, I go to the beginning. I hard reset the ae, run it through setup assistant (vs. admin.) tell it I want to join the existing network enabling iTunes, naming the unit, etc. The only difference in what it sounds like you're doing and what I did was enable the unit to act as a WDS remote (I wanted to extend my range) feeding from the base. it sounds as though the unit can be seen but it is stretched for range. If you elect to do the hard reset, move your ax as close as reasonable to your existing base. After you have done the setup, the light will turn green, then flash amber (twice as I remember) and turn solid green again. You can then unplug it and move it where you need it. I am running three units to three stereos and the furtherest is about ninety feet away with multiple walls. It feeds off the closest ae which is only about thirty feet and the whole thing works as an all select or single select system with iTunes. I have airfoil from rogue amoeba but I have not found it to be as reliable in broadcasting to mutiple units as iTunes. Try it again (I hate to ask) and let us know.

G4 (MDD) with AirPort Can't See/Won't Connect to Wireless Networks

Hi all. I've seen topics/threads that get close to my question/problem, but not quite.
I inherited a PowerMac G4 (MDD)/Dual 1 GHz/1.5 GB DDR SDRAM/running 10.3.9.
I purchased a used original AirPort card from eBay, opened up the machine, and plugged it in. When I went to update the software (from a CD), my machine told me that it was up to date (though one HD is running OS9 and one running OSX -- so the software wouldn't install because the HD running OSX said it was up-to-date and the HD running 9 said it was impossible). The machine recognizes the card/shows it gray in the toolbar/says it has Firmware Version 8.70 in the System Profile.
My problem is that the AirPort can't see any wireless networks 99% of the time, even though 3 (including mine) are in range all the time. I've seen my network only flicker into possibility a few times, and even though I've disabled all security measures on the wireless router (Linksys Wireless-G, Model WRT54G), it simply won't connect. One time in 3 hours it momentarily looked like it was going to connect, then said "out of range," then disappeared completely. It has seen 0 wireless networks for the past hour.
I've read everything far and wide trying to solve this issue and am totally stuck. At first I thought I needed an antenna for the AirPort, but this is an internal card, so that doesn't seem right. I know the AirPort card (and not Extreme) is right because a) I don't have a FW800 port and b) the machine recognizes this card. Finally, I thought it may have had to do with the WPA security on the Linksys, but even with security disabled...nothing.
I'm feeling very frustrated. Any advice?
Thank you very much.

Thanks, Tom. I did as you suggested, and the Max Signal under the Log is showing a red 12, which is terrible, yes? What, exactly, does this tell me? That this is simply a case of old technology (AirPort b) struggling to communicate with new technology (Linksys g) over a medium distance (Linksys is in next room, through wall)? If plugging straight into the ethernet were an option, I'd just do it. But I can't get my G4 onto the Internet without running cords down the hallway and through my TV room, which is an obvious eyesore.
Is there a chance this AirPort card is only partly functional and I should return it? Or do I need to accept the fact that this G4 needs to either be moved closer to the Linksys router or be plugged in directly?
Thank you.

Macbook can't see external HD connected to iMac

Hello,
I just bought a Macbook and set it up with my iMac on the wireless network. Everything else works fine, but my Macbook can't see the external drive that is connected to my iMac. I want to be able to back up the Macbook to the drive. I tried turning on file sharing on the iMac and adding the LaCie drive to the list of shared folders, but its still not showing. Is there something I need to change or configure to get it to show up?
Thanks

I believe this Airport update, released in the spring (2008) did enable AirDisk usage with Airport Extreme wireless devices:
http://www.apple.com/support/downloads/timemachineandairportupdatesv10.html
MacWorld: Update allows Time Machine backups on AirPort Extreme
http://www.macworld.com/article/132613/2008/03/airporttime.html
Unfortunately, it is Mac OS X 10.5 (Leopard) only, and I see form your stats that you are still on Tiger (10.4).
It will be interesting if Tadd's tip works though. Let us know.
Cheers!

Can't see USB hd connected to airport extreme w/ iPad

Plugged external hd in airport extreme but can not see using IPad .I have downloaded app for airport & can find airport but does not show hard drive. How can I access files on external hard drive?

Unfortunately you can only access hard drives plugged in airport extreme or time capsule, from a Mac or a PC. iOS devices (iPad, iPhone, iPod touch) do not support this feature.

HELP: Can I see whether a connection/stmt is open??

Hi there,
anyone knows if it is possible to see if a connection and preparedstatement is open??
I'd like to be able to see this in my app, as I do close resources after execute, and must open them again if user calls method again....
Best regards,
AC

Thanks! What about the preparedStatement then?? Guess it should be dependent on the connection...
If I have a class as follows,
class Test{
PreparedStatement prepStmt;
Connection conn;
void executeQuery(){
...etc...
and when a user calls executeQuery, if the Connection conn is closed, then PreparedStatement prepStmt should be closed too?? (provided that I always use conn to create prepStmt)
Is this correct??
Best regards,
AC

Help.... how can i see who is connected to my itunes

Hey,
i am more then happy to allow people to connect to my playlist but i want to know how is it possible to know who is actually connected not just how manny people.
Thank You

Can someone help me with my question?

I can't see the other person when using facetime but they can see me just fine, how can i fix this?

When I use facetime with my fiance on my brand new macbook air she can see me but I can't see her. Please help me remedy this problem, I have verified that I am logged into facetime and connected it with both my ipone5 and my email but haven't seen any changes. It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook. Thank you for your help

Frogmanian wrote:
It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
MacBook Air does not run iOS. It runs OS X (pronounced as in OS - ten). You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac". The current version is OS X 10.8.4. If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection.

I can't see images or icons in firefox or emails downloaded with firefox. What do I do to fix this? Thank you.

In particular, I can't see the up and down arrows that enable me to move from one email to another in gmail. There are many other problems: I can see NO icons and I can see NO images in my emails, whether it be hotmail, gmail, etc. when I use firefox. I read loaded firefox and got the same result. How can I fix this. Thanks.
Phil

The Yahoo! Toolbar and the Babylon extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
*See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Can't see available WLAN Connection on Tecra A5 but ok with Tecra M5

Similar Messages

Maybe you are looking for