Can't see BlazeDS server side log

Hi,
I'm running JBoss 5 EAP and BlazeDS 3. I don't see any server side log for BlazeDS even though I followed BlazeDS documentation. Following is the logging section in my services-config.xml:
    <logging>
        <target class="flex.messaging.log.ServletLogTarget" level="All">
            <properties>
                <prefix>[BlazeDS]</prefix>
                <includeDate>true</includeDate>
                <includeTime>true</includeTime>
                <includeLevel>true</includeLevel>
                <includeCategory>true</includeCategory>
            </properties>
            <filters>
                <pattern>Endpoint.*</pattern>
                <pattern>Message.*</pattern>
                <pattern>Service.*</pattern>
                <pattern>Configuration</pattern>
            </filters>
        </target>
    </logging>
According to the documentation, I should see log entries for BlazeDS in JBoss server log. But I didn't. Can anyone help me out with this issue?
Thanks.

Sorry, just as an addedum, I can connect through a hard connection, but I can't access Screen Sharing

Similar Messages

VPN Connected but can not see folders / server

I have established a connection between an OSX server and client but now can not see the server or any services on the client. There are no servers listed in the 'Network' section of finder and using 'Connect to server' I can not see it either. The log on the server shows the connection and the client does as well but other than that I can not do anything with the connection.
Details
- Using 10.6 osx server and a 10.6 client.
- Connected via VPN, L2TP
Thanks,
Brian

I have connected to VPN but can't see anything on my finder or desktop.
I tried connecting to server by doing command+K and entered the ip address like afp://ipaddress/user
doesn't work. I get error message saying:
Connection Failed
The server "165.124.164.125" is available on your computer. Access the volumes and files locally.
help!!

How can i see a detailed call log

how can i see a detailed call log including actual numbers on restricted calls

bobsouthernguy wrote:
how can i see a detailed call log including actual numbers on restricted calls
You won't see the numbers if the call came in as restricted...that's the point of a caller blocking their number.
You can pay for a service like TrapCall that will give you the restricted numbers. Or you can use a service (free) like DitchMail that gives callers a recording asking them to unblock their number and call back, if the call comes in with the number blocked. It then hangs up without giving them the opportunity to leave a message.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Firefox Sync can't setup; can't see sync server

I've allowed mozilla.com, .net, and .org. but Sync says it can't see the server when I try to create an account.

https://twitter.com/mozservices/ Mozilla Services ‏@mozservices 2h
<blockquote>The Firefox Sync service is operating, however we are having some DNS propagation issues, which should be resolved very shortly.</blockquote>

I've lost my iPad, can I see where it last logged onto wifi?

I've lost my iPad, can I see where it last logged onto wifi?

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Can anyone suggest why Dev Studio can't see the server engine

We have NW2004s/SP08 installed. The server J2EE engine runs fine and one can log into the server and succssfully deploy jar's directly to it.
We also have Dev Studio installed on a desktop and it works fine. We have our J2EE preferences set using the actual IP address of the server J2EE engine and port number 3061. (We can ping this IP address successfully.)
When we try to do a Deploy/Run from Dev Studio and monitor this attempt on the server side, we can see Dev Studio trying to connect.
But it doesn't connect. In Dev Studio, we just get a message saying "sdmhost empty or unknown".
What's missing in our config? It was set up for us by externals no longer here. Since we can successfully ping the IP of the server from the PC, and since we can see DevStudio trying to connect, it can't be a network connectivity problem.
Thanks for any suggestions as to where to look/what to do.

Pascal -
I am indebted to you for your kindness in taking the time to answer such a trivial question.
I assume that because the client is now asking me for the SDM password, your solution is correct. (It didn't ask me for a password before - I just got the error message.)
So I've tagged your reply for 10, even though I don't know the password so can't completely confirm yet.
I'll cycle back and confirm once I have the password.
Thanks very much again.
Dave

Can't see Exchange Server after installation

I know it must be simple, but after installation of Exchange Server 2013 on Server 2012 R2 and getting the "successful" installation message, I can't find the server. It was not problem on Server 2008 and Exchange 2010.
Any ideas as to where I should go to look for Exchange? I can't even setup mailboxes???!!!
I really am lost on this one.

Hello,
In addition to above: make sure that Exchange 2013 is installed correctly. Check Exchange installation logs and run the Get-ExchangeServer command using Exchange Management Shell on the new server. You should see both Exchange 2010 and Exchange 2013 servers.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

Can't see SLES server joined to domain

Hi all: I am a domain membership on SLES newbee and I need some help with getting an SLES server working properly with our domain. The server I need help with was recently rebuilt from OES 11 to SLES 11 due to zenworks incompatibility. I still need to be able to access this server's storage over the network. When I browse the network from my Windows 7 computer the server does not show up and I cannot reach the server via \\servername. The server is in our DNS database.
So I joined the server to our domain successfully. I used the newer style domain notation rather than windows 2000/NT notation. I can see the server in now a member of the domain by looking at the domain members on one of our DCs. I have not enabled any other features such as "Also use SMB information for Linux Authentication" and "All users to share their directories". NTP is configured and operating. The server does verify that it is a domain member. Under Samba configuration I have set the domain using the older style domain notation. It is not a DC controller. I have also set the NETBIOS name.
I would appreciate some help understanding what I did wrong and what I need to do to correct this. BTW, I tried this once before on a test server and it worked well. Not sure what I did different.
Thanks for the help, Chris.

DSfW does not apply as you pointed out, and I don't believe I was referencing that component. I need this SLES 11 SP3 server to be visible to some of my users. I want to share a directory named "storage" and I need it so that they can authenticate via AD rather than adding all these users as onto the SLES box. My users also need to be able to browse to the server using Windows Explorer or get to it via \\server.
So in YAST2 I can set up samba but I can also join the domain. This is where I am getting confused and setting something incorrectly.
>>> Simon Flood<[email protected]> 8/28/2014 8:32 AM >>>
On 28/08/2014 13:02, cmosentine wrote:
> Hi all: I am a domain membership on SLES newbee and I need some help
> with getting an SLES server working properly with our domain. The
> server I need help with was recently rebuilt from OES 11 to SLES 11 due
> to zenworks incompatibility. I still need to be able to access this
> server's storage over the network. When I browse the network from my
> Windows 7 computer the server does not show up and I cannot reach the
> server via \\servername <file://\\servername>. The server is in our DNS
> database.
>
> So I joined the server to our domain successfully. I used the newer
> style domain notation rather than windows 2000/NT notation. I can see
> the server in now a member of the domain by looking at the domain
> members on one of our DCs. I have not enabled any other features such
> as "Also use SMB information for Linux Authentication" and "All users to
> share their directories". NTP is configured and operating. The server
> does verify that it is a domain member. Under Samba configuration I
> have set the domain using the older style domain notation. It is not a
> DC controller. I have also set the NETBIOS name.
>
> I would appreciate some help understanding what I did wrong and what I
> need to do to correct this. BTW, I tried this once before on a test
> server and it worked well. Not sure what I did different.
Reading the above am I right in thinking that your server is not running
OES11 but instead "regular" SLES11? If so, where does Domain Services
for Windows (a component of OES11) fit in to the above?
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

TS4526 picture on tv is too large can't see writing on sides of screen

I can't see the writing on the sides of my tv. It's a 42 in Pioneer plasma tv. No setting I have tried get the picture small enough to see the whole picture without wods chopped off the left & right sides Thanks in advance Joe

When you have tried to change settings is that via Apple TV or your Plasma?

When i open firefox i can only see the left side of the website but the left hand side of the website is on the right side of the screen

it was working fine before and then 1 day i loaded firefox and now i can only see 1 side unless i i use full screen mode, please can any1 help me
it looks like the left hand margin is way to big but i hav already looked at this and it is not the problem, and ive tried zooming in and out aswell and reseting the zoom ect

Hi - I think this is related to the Babylon Toolbar
Right Click on the toolbar in the grey area this is at top of the screen - If the Babylon Toolbar is ticked deselect it and all becomes well.
Cityjet

Manifest.webapp can't run on server side

I have made one demo of firefox os webapp. manifest.webapp is working fine in localhost but it's not working on server side.
if i add below link, it's working
http://dev.artoonsolutions.com/dharmesh_ajani/oldcity/app/www/index.html
but with below way it's not working
http://dev.artoonsolutions.com/dharmesh_ajani/oldcity/app/www/manifest.webapp
Please check it and let me know if anything i missing.
Thanks

Hi,
Sorry for the late reply, I don't know the answer to your question (or if you still have the problem), but app developer questions and links to documentation are here:
http://stackoverflow.com/questions/tagged/firefox-os
Maybe a dev there can help you out? Thanks for writing apps for Firefox OS!
Regards,
Michelle Luna

WHere i can see the Server side Errors in WAS

Hi,
I'm creating a java application.where i wrote Jsp,Servlet,Sessionbeans.I'm getting runtime Exception.Like in Weblogic/Tomcat, In WAS where I can see the console so that I can see the Error messages.
Or will it create any Log file If so Where it will be created.Plz Suggest me how can we view the error message or log message.
THanx

Hi Lakshmi,
depends on the version you are on.
EP5: See /thread/23766 [original link is broken]
EP6SP2: See /thread/25694 [original link is broken]
EP6 NW04: See /thread/19070 [original link is broken]
Best regards
Detlev

Can't see Samba Server in network browse

Hi there,
I have been trying stuff for hours, now I think it's time to ask someone:
I have a samba server with a static ip (netctl).
I can ping the server, ssh to it, smbclient -L is working and also in Nautilus if I use the 'Connect to Server' option everything works fine.
But when I try to 'Browse Network' I only see the Workgroup but when I want to access the Workgroup after some time of wait I get 'Unable to access location Failed to retrieve share list from server: No route to host'.
Also if I stop using static ip with netctl and use dhcpcd 'Browse Network' starts working...
I really don't see whats the problem, does someone else?
Here is my netctl profile:
Description='A basic static ethernet connection'
Interface=enp2s0
Connection=ethernet
IP=static
Address=('192.168.178.200/24')
Gateway='192.168.178.1'
DNS=('192.168.178.1')
And my smb.conf:
[global]
workgroup = WORKGROUP
server string = SMB
security = user
map to guest = bad user
log file = /var/log/samba/%m.log
max log size = 1000
interfaces = lo enp2s0
bind interfaces only = true
dns proxy = no
[Files]
path = /data/smb/Files
public = no
valid users = qam
writable = yes
[Shared]
path = /data/smb/Shared
public = yes
only guest = yes
writable = yes
Thanks in advance
qam

i discovered a little strange thing...i can see remote pc only after 30-40 minutes after i booted the server machine, so it is not random, why this?

Can't see a server in Finder's Network view

Hi,
In the Network view of the Finder, my G4 (10.4.3) on the LAN can see my eMac (10.4.4), also on the LAN. My PowerBook (10.4.4, wireless) can see the G4, but cannot see the eMac. I can, however, connect to the eMac from the PB by entering the IP address directly in the Connect to Server dialog. Any reason this might be?
I can see the PB from the eMac.
On both the G4 and the eMac I have to go via the Network > My Network icon to see available servers. On the PB, I have no My Network icon - the G4 appears as soon as I click on Network.
Is it likely to be a wireless problem, or a preferences problem, or a 10.4.4 problem? I've had problems similar to this before which were fixed by switching various options in the Directory Access utility. No joy this time.
I can supply more details if required (I'll save space for now!). It's not a simple network...
Martin (at em-dash dot com)

Sorry, just as an addedum, I can connect through a hard connection, but I can't access Screen Sharing

Can't see BlazeDS server side log

Similar Messages

Maybe you are looking for