CAN'T SEE BOX TO EDIT MY FOOTAGE!

PLEASE HELP! I can import footage no problem, but there is no frame appearing around it when selected to edit its size/rotation. Its killing me. Please help! gem

Does it work fine from using the sliders on the timline?
I'm thinking you need to enable something under View Options (found by clicking the arrow at top right of Composition Window).

Similar Messages

I can't see how to edit PDF inside Portfolio for Acrobat X. In Acrobat 9 Pro

I can't see how to edit PDF inside Portfolio for Acrobat X. I can do this in Acrobat 9 Pro with the Document pull down menu. Did they take this away in Acrobat X?

Whether it's maxed or not doesn't make any difference.
The bottom part of the image/scroll bar is always under the Windows taskbar any time the URL is opened.
It is always fixed by doing something, either switching to and back from another window, or turning on and off one or more toolbars.
That shouldn't be necessary. The bottom part should be visible when the URL is opened.

How can I see previously ViewNX2-edited photos (raw) in Lightroom 3?

I recently bought Lightroom 3, and after importing my previously ViewNX 2-edited photos (in RAW, NEF), I saw that Lightroom doesn't show those changes. I can only see the photos in its original form.
Is there a way to import them to Lightroom 3 and see the changes made in ViewNX 2?
Thanks.

If you want your VNX2 adjustments to appear in LR, you'll have to export as TIFF or JPG from VNX2 and import that file into Lightroom.
Hal

How can I see, use and edit contacts on PC without...

Now I finally worked out how to sync my contacts to my N95 8G (see earlier posts), I would like to use this data, plus the calendar data on a daily basis on my PC and update it where necessary, before finally synching back to the N95 at the end of the day.
Has anybody any ideas how this can be done ?
With my old Palm-based system I would use the Palm desktop but the PCSuite (v. 7.0) doesn't seem to offer this functionality.
Now the contct and calendar data must be copied there on the PC as I've performed a back-up via the Suite, but how do I get to see and edit this data (or a copy thereof) on the PC ?
If Nokia can't be bothered to work out how to do this, has anybody come across any third party vendors who have ?

01-Sep-2008 12:17 PM
larrygt wrote:
Hi - sorry for the tardy response.
When I saw that my Palm device was fading rapidly and that it was no longer supported by upgrades to new versions of Windows (a Sony Clie of 2002 vintage that I used for everything bar phone calls), I backed up my palm desktop contacts, calendar etc. to my Yahoo account with no problems.
My other posts on this forum described my frustration at not being able to simply export a file back out of Yahoo that the N95 would understand, without losing bits of the contacts (e.g. all the telephone numbers). In the end I had to go via Outlook - my other post (copied below) describes how I did it.
The approach is not perfect and I intend it to be a once only thing. I will still suffer the hassle of entering new contacts into both my N95 and my online address book as the Nokia PC Suite does not appear to accurately read csv files created by Yahoo.
My poor user experience with N95 will make me think seriously about going back to a Palm-based / Blackberry device when upgrade time comes around again.
1: Open Outlook and back up the existing contacts (that you wish to keep separate from your N95 contacts) by exporting them to the desktop in a .pst - "outlook.pst"
2: Once they are backed up to Outlook.pst, select all these contacts in Outlook and delete
3: In Yahoo, export all contacts to an Outlook format .csv file (note, Yahoo offers different .csv formats) - "Personal.csv"
4: In Outlook, import the new Personal.csv file you have created. Check contacts. Delete duplicates, and check/update errors (i.e. use Outlook like the PIM that PC Suite ought to be and isn't !).
5: In Nokia PC Suite, use the Synchronise function to synchronise the N95 with Outlook
6: Select all personal contacts in Outlook that you just imported via persoanl.csv, delete them to clean out Outlook.
7: Re-import the Outlook.pst file you originally created above to restore your original (work?) outlook contacts.
Thanks for taking the time to share "our" frustrations. As you've indicated, after enjoying the ease of managing Palm data both on the device and on the desktop, the Nokia N95 simply falls flat on its face (despite the shopkeeper's assurance it was far and above better). I have found that at least the generic PC Suite has a means to view the calendar and contacts on the desktop provided the phone is hooked up by USB. I still had to manually enter everything onto the phone to get it all as I want it, and have decided to only put the stuff I truly need to have with me at all times. I also tried to download an MP3 program but it won't accept the format (and I thought Sony had the wrap on exclusivity!?). When Nokia or another company comes up with a truly do-it-all-right format, I'll be first in line. Meantime, I will take my Palm on trips, and will tuck the MP3 player in a side pocket. This was an expensive mistake that I won't make again.

Can't see original and edited Pic in My Catalogue

I started using Photoshop Album Starter Edition yesterday. And I'm pretty sure that when I edited a picture, the catalog would insert the edited version right next to the original.
Now, I cannot see both the original and the edited version. I see in the catalogue only originals I have not edited and the edited versions of all the others.
In Windows Explorer it is clear that the original picture is there. Also, I can click on it and open with Starter Edition (Viewer), but that only lets me see a slide show version - no editing.
I've tried reconnecting and finding (using menus and buttons) and I get an error message that the file(s) is/are already in the catalogue.
The Show All option is on in the catalogue, BTW, and I have tried this on two different computers with separate downloads of APA SE (downloaded at separate times) with the same result
If I change the filename slightly - e.g. file001.jpg => file001a.jpg, then I can import the picture, but renaming all the files would be a burdensome process.
How can I view and edit both the original versions and the edited versions right next to each other?
Thanks!

Thanks for the prompt reply. I'm glad I wasn't going crazy, and there's a reason the originals weren't viewable. If I understand you correctly, the original can come back into view in PSA SE if I choose to "revert."
Question:
Does "Revert" mean that (1) the edited image disappears altogether - i.e., is deleted - or (2) the image doesn't show up in PSA SE's catalog any more, but still exists physically on the drive?
As to why I'm trying to fight PSA's help: Sometimes I just want to see the original and the edited versions to see if I really prefer the edited version better, or want to try different editing options. I know you can do this side by side in the "before & after," but the images there are not very large.
And I guess you're right about duplicating if I want to do different things with the same image, but that requires planning ahead, a trait which I ....
So, Question:
Is there some way to fight back and win, i.e., get the catalog to show both the originals and edits, other than individually renaming each original file and importing it again?
If not, then I'll have to look at the images side by side in windows explorer or do the duplicate option.
Thanks again!
- Ileana

Can't see "Add or Edit Fields" menu in Acrobat 9 Standard v9.5.2

I am trying to edit the fields of an Adobe form from one of my co-workers. We both are running Acrobat 9 Standard v9.5.2. She is able to see the Forms-->"Add or Edit Fields" menu, while I cannot.
I cannot get this menu item to show? Can someone tell me if there is an option or setting to enable so that I can get to this menu item?
Here is a screenshot of the form:
Here is a screenshot of the Adobe Acrobat version we are running:
Thanks,
Ted

Finally found a work around to my problem. Here are the steps:
(1) The original form. Note missing "Add or Edit Fields" menu item.
(2) Click on Document-->Extract Pages
(3) The following dialog pops up. Since I am only working with a 1 page form I accept the defaults and click OK.
(4) The following window is launched. Now I just save the newly generated form:
(5) Now when I check the Forms menu, I finally see the "Add or Edit Fields" item: Yay!!!!
(6) In checking the Document Properties of the new form, the Application (PScript5.dll) and PDF Producer (GPL Ghostscript 8.15) metadata is still the same as before:
Still don't know why I couldn't get to the "Add or Edit Fields" menu item in the original form. After doing the Extract, now I am able to get to it. At this point that's all I care about right now.
Thanks George for helping me investigate this issue!
Teo

Can't see text to edit in CS5

Hi all...
I feel extremely stupid asking this question, but using the trial of CS5, when I open a CS4 project I am unable to see the text which I want to edit.
I can highlight it (select), and view it in the other compositions but when i go to edit the text layer itself there is just the grey area (workspace) with no visable text, when i guess where it is and highlight it all i get is a shaded area.
I have to go back to the main composition to see the changes.
This did not happen in CS4.
What stupid mistake am i making?
Many thanks in advance

You edit text in the Composition Panel (comp window). Always have. You don't edit text in a Layer Panel. I'm not even sure how you would open a text layer in a Layer Panel. It would really help if I new a little more about your composition.
It sounds like the Text layer may be in a pre-comp and that the text may be the same color as the pre-comp background. A screenshot of the project or a screenshot of the project flow chart would help.

Updated to ios7. I can't see how to edit or forward texts c

Updated phone. How do I edit or forward texts?

Tap and hold on the text you want to foward. Tap "more" in the pop up menu that appears. Tap the forward arrow that appears in the lower right corner.
Best of luck.

I can't see the dashboard, edit, customize, etc. buttons on my own Tumblr blog. I can see them on other blogs and I can see them while using other browsers.

This problem started suddendly, it was fine until yesterday. I've tried changing my theme on Tumblr, unistalling all of my extensions, cleaning cache and even reinstalling Firefox again but nothing worked. I emailed the Tumblr staff and they told me that it's probably a Firefox bug.

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?

Can't see live edits

I can't see what my edits are doing to the develop module , its shows the filmstrip picture getting edited buts its a 3/4 inch square. The develop module picture show nothing until i switch to a different pic in the filmstrip section and go back to see what i did. can anyone help me i've put this on here before and have yet to get any ideas and can't find any numbers for adobe.

What version of LR? What computer are you on, with which operating system?
Hal

How can i import my color editing from apple color to fcp x

Hello mates,
I edited my project in FCPX 10.0.8 than i export XML file and open it with DaVinci Resolve to export it again for Apple Color. So far so good no problem. I edit my color in that program but when i said send to final cut pro it was opening with the old projects. I mean i can't see my color editing in that project. I can't figure out how can i import that file in fcp x. I tried to export an XML from color, but i couldn't open it with Davinci nor FCPX.
So i will be very glad if you help me..

FCPX does not read Color XML exports. You would need to export the finished footage in Color and reimport that into X. Resolve is free and offers a far more integrated workflow with X than Color ever will (as it's long been discontinued).

How can i see created stored procedure from oracle?

Hi All
could any one help me?
i have created procedure Insert_Profilebasicdetail and more in oracle 10g
now i want 2 see the structure or code for the created procedure
how can i see?
Thanks
Edited by: Ajay Patel on Sep 25, 2008 2:18 AM

Hi,
If you want to know the paramters of the procedure or decalaration jist use describe
14:53:56 SQL>desc dba_verify_db_current_schema
PROCEDURE dba_verify_db_current_schema
Argument Name Type In/Out Default?
IN_USER_NAME VARCHAR2 INIn Order to know the Source Code.. you might have got the reply.. from the Earlier Response... !!
- Pavan Kumar N

Can't See My Pictures--Just Empty Boxes

I just did a download of new pics from my camera to iPhoto. Somehow during the download I can't see my pictures in my library or in my albums. Just empty boxes show up. The count of the number of pics is accurate for both the albums and the library.
I restarted my computer, and rebooted with no luck.
I did a reboot holding down the "apple" and the "alt" key, and followed instructions, and still no pictures.
Any ideas of what I can do?
Danny
[email protected]

Danny:
Welcome to the Apple Discussions. What do you see in the library, empty thumbnail spaces or empty edit windows? Is it all the photos or just some? Check in the Originals folder to make sure you have the full sized image files in the subfolders. They should all be there. Also do you have folder in the iPhoto Library folder titled "Recent Imports" or something like that?
Do you have a backup copy of the iPhoto Library folder or the iPhoto library database file, Library6.iPhoto?
If not and since you've tried rebuilding the library with no success you're going to have to start with a new library and import the image files from the Originals folder of the current library. Here's how:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the desktop into the open iPhoto window.
This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar crash all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature.
If you have a recent backup copy of the library post back and we can go from there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
Regards
TD

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

CAN'T SEE BOX TO EDIT MY FOOTAGE!

Similar Messages

Maybe you are looking for