Can't see conflicts item in iSync menu

Hello,
I am using OS X in Swedish, which probably means I will not use the exact English terms in my question - apologies!
I have a Nokia N73 which I have been syncronizing with iCal, using bluetooth/iSync 3.0.2. Now changes I make to the phone calender aren't transferred when I sync. I can't understand why, but wonder if it has something to do with the principles for resolving conflicts between the two. I am now trying to view the "conflicts" item in iSync, but can't find it. The "show status" box is checked, but I still can't see a "conflicts" menu item. What am I doing wrong? Any suggestions? This is soooo frustrating, any help would be greatly appreciated!
Many thanks,
Helena

This is for PE4, so things might be slightly different in other versions. In the main tab area, make sure you are in Edit. Then below, click on the Project tab. Your Assets will display there. Exactly how they display will depend on your display settings. If it has been Imported, it should appear there.
Now, with Menus with Motion Backgrounds, remember that there is a 30 sec. max limit to the Duration of a Menu in PE (do not know if it was bumped up in PE7). When I create a Motion Background AV, I do so on a Sequence in PrPro2. PE does not have Sequences (kind of like mini-Projects), so if I were using PE, I'd do a separate Project and would edit my Motion Background to fit, then Export as a DV-AVI Type II, for Import into my Project. With PrPro and Encore (my authoring program), there is a 40 Duration limit, and that is what I do. I also Export my Audio as an elemental stream, rather than use a muxed AV file, and Export these separately, then Import them separately into Encore. Now, I do not know if PE automatically truncates the Duration of the Motion Background Asset to 30 sec., of if one needs to do this separately. Steve, or Robert can fill in that blank for you. However, my method should work fine, but might include an extra step, if PE does the trimming automatically.
Now, if you are using an AV Asset from the Template list, you will probably have to Import that separately, as I do not think that PE uses the .EM format, that links Menus (.PSD's) and other Assets for Motion Backgrounds (.WMV, .MPEG, .MOV, or other). Again, one of the PE experts can tell you about that.
Good luck,
Hunt

Similar Messages

  • Help-can't see (canvas) item in viewer

    Hi
    I'm trying to position an 8 point garbage matte by use of the canvas, but can't see the positions because I can't see the item in the viewer while I am on the controls page in the canvas
    please excude dumb qstn, what am I doing wrong, how can i get it to show in viewer?
    thanks : )

    Hi(Bonjour)!
    Not sure to understand your question, but you can "tear" the filter tab from viewer window and position it anywhere on your screen. Be sure to double-clic the clip with the garbage matte applied to open it in viewer before tearing the filter tab.
    There also a local menu in this filter that allows to "see" either your garbage matte, source material, composition in the canvas.
    Michel Boissonneault

  • HT1766 if i backup how can i see the item that backedup because i am not shure about my note.

    1.how can i see whitch item of my ipad were back up because i want to be sure that my note were backup.
    2.apple id and i cloud id have to be same or not .i cant see my note in i cloud.
    3.how can i go to see my back up in i cloud?

    Give a little more time. The time between you initial post and your reply was only six minutes. It was ten minutes between your first reply and your second reply.
    You are not addressing Apple here. We are just users like yourself.
    The only way to see what is backup in iCloud is to restore you iPod from your iCloud backup
    For what is included in backups see:
    iTunes: About iOS backups
    iCloud: iCloud storage and backup overview
    Your Apple ID and iCloud ID do not have to be the same. Notes are associated with your iCloud ID. You have to go to icloud.com and sign in to your iCloud ID to view your Notes.

  • Can't see my items on formulas

    Hi everyone
    I am a newbie about OPM. I want to create a formula about my item. I use "OPM All" responsibility for creating items (Demo instance).
    I use this path for creating items.
    "OPM All" responsibility
    Inventory > Items > Master Items
    and I assign the item to "PR1" organization. Then go to this path.
    Formulator > Formulas
    In formula section I click the LOV but I can't see my items that I created.
    Pls help.
    thanks.
    Engin

    I found the problem
    In master item forms there is a tab named "Process Manufacturing". You must click these options.
    K.R.
    Engin

  • Can't see devices items on the finder

    Hi after downloading lion i can't see devices items on Imac. How can I find those? Thank you for your help in advance. 

    Some more information may be helpful. 
    What can't you see?  Your internal HD?  External USB drives?  Printer?  Scanner? 
    Where can't you see it?  On your desktop?  Under "System Information"?  Sidebar?
    Thanks! 

  • Can't see all the drop down menu items in Thunderbird

    I have a MAC OS10.8.5. and Tbird 36.1. I have been searchING for strategies to increase the font size on Tbird. I added the "theme font size and changer". THIS improved my situation a bit.
    I upgraded my MAC from 10.6.8 to 10.8.5. A few weeks later I noticed that I can not see all the contents in the drop down windows.
    I disabled the "theme font size and changer". I deleted the localstore.rdf. No results either time.
    Attached is one of the windows. When I am typing in the "To" field, the auto-fill only lets me see barely 1 email. When I go into preferences on Tbird, the windows for preferences are cut off.
    How can I restore the windows so I can see everything?

    Please check your graphic driver is up to date.
    If it still fails to work after updating drivers:
    Then test in Thunderbird safe mode.
    Help > Restart with addons disabled
    If this fixes the issue then it is possible that one of your addon extensions is causing the problem. You would need to restart in Normal mode and then disable addon extensions until you locate the one causing an issue - maybe it needs updating.

  • Can't see template button assets in menu editor

    I'm unable to see the graphic assets of the buttons when pulling up a template in DVDSP. In the menu editor I can see the buttons but it has a gray background and I can't see the buttons graphic assets.
    When I simulate it looks fine. Shouldn't I be able to see the graphics?

    Hi Colin
    Did you restart Captivate after you installed the new skin??
    I seem to recall from another post that this was the problem as
    Captivate needs to restart to accept the new skins.
    Cheers
    Andrew

  • Biege G3 Monitor Works but can't see the Dock or apple menu

    While my G5 is in the shop, trying to use my G3 with either a VGA or my 23 inch Cinema display. It boots fine with one or both monitors connected but I can't see the dock or any of the applications - especially the preferences panel, I manage to get open (I used a keyboard shortcut to get the applications window open). I can drag the window back and forth across the monitors so in that way it's acting like it's in a two-monitor setup. I can open (and see) the force quit window which tells me the preferences panel is open - but where the heck is it?
    I've zapped the pram more than once and restarted using a dvi to vga converter but neither has made a difference.
    I'm guessing I'm running 10.1 but, as it's been awhile and I can't see the apple menu, not sure. I tried starting in classic to see if I could get to the preferences panel that way but it hangs on the grey screen.
    Thanks for any suggestions.

    Do you have any kind of cable or video-adapter plugged into any of the other video output ports: Macintosh-video or RCA-video out? Even if there is not a monitor, the cable or adapter alone may trick the video card into thinking one is present.
    (Another interesting behavior with dual monitors in OSX: Usually the Dock follows the monitor on which the Menu Bar is located when you have the Dock positioned at the bottom. But if you use the left or right position, it goes to whichever monitor is on the left or right, no matter which one has the Menu Bar.)

  • Can't see any words on finder menu

    My finder menu, trash, and drop down menus are blank. I can't see any words or icons.
    This is what it looks like
    http://imgur.com/y9bMFi7,dHUismv

    Try the following: boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk permissions and disk.  Reboot normally and check the menus.

  • Can't see desktop items

    hi all, my mac froze and the only thing i could do was turn it off using the power button at the back. now i can't see any of my desktop icons or folders. i know there still there as there still showing in spotlight.

    This is not a virus. This is serious data corruption, and or driver issues, or directory issues. Time Machine will only be useful in one respect is having a backup to a point with your data before these events started happening. You on the other hand should start taking Time Machine like steps today, and not wait around for Leopard. My FAQ here explains how:
    http://www.macmaps.com/backup.html
    Once you are backed up, we can analyze what issues are plaguing your machine.

  • Can't see "Add or Edit Fields" menu in Acrobat 9 Standard v9.5.2

    I am trying to edit the fields of an Adobe form from one of my co-workers.  We both are running Acrobat 9 Standard v9.5.2.  She is able to see the Forms-->"Add or Edit Fields" menu, while I cannot.
    I cannot get this menu item to show?  Can someone tell me if there is an option or setting to enable so that I can get to this menu item?
    Here is a screenshot of the form:
    Here is a screenshot of the Adobe Acrobat version we are running:
    Thanks,
      Ted

    Finally found a work around to my problem.  Here are the steps:
    (1) The original form.  Note missing "Add or Edit Fields" menu item.
    (2) Click on Document-->Extract Pages
    (3) The following dialog pops up.  Since I am only working with a 1 page form I accept the defaults and click OK.
    (4) The following window is launched.  Now I just save the newly generated form:
    (5) Now when I check the Forms menu, I finally see the "Add or Edit Fields" item:  Yay!!!!
    (6) In checking the Document Properties of the new form, the Application (PScript5.dll)  and PDF Producer (GPL Ghostscript 8.15) metadata is still the same as before:
    Still don't know why I couldn't get to the "Add or Edit Fields" menu item in the original form.  After doing the Extract, now I am able to get to it.   At this point that's all I care about right now.
    Thanks George for helping me investigate this issue!
    Teo

  • How can i see which items are taking up the most disk space

    I have a Titanium PowerBook G4 with a 20GB hard drive. I'm currently using 15GB. I have tried searching through my hard drive to see which programs are taking up the most space. When I add up the totals of the various folders, etc., it's not 15GB worth. I feel like some items must be nested somehow, making them difficult to find. Is there some way to search your computer by size of items? I know that opening the hard drive and clicking on the size tab will sort things according to size. However, the folders don't show their size unless you click on them individually. Any suggestions?
    Thanks.

    While viewing a Finder window go to View>Show View Options, put a check in the box for 'Calculate All Sizes'. This is a setting you don't normally want to have turned on as it slows down the refresh when you switch windows, so you might want to remove the check once you identify the disk hogs.
    BTW- You can free up a lot of disk space & RAM if you remove any fonts that you & the OS don't really need. You may also have a great deal of space taken up by unnecessary printer drivers, not to mention the plethora of ReadMes & other 'goodies' that get added when you install software.
    HTH |:>)

  • Changing my data!  Scary!  Can't see apptmt items on pc Outlook either!

    Major bug! My data on my PC keeps changing when I sync my iPhone 3G. It changes people's birthdays (yet it's always correct on my iPhone), it deletes past appointments on my PC (yet they show correctly on my iPhone) and if I add or change an appointment on my iPhone it will NOT show on my PC (yet it is there as it does show on my PC when I change my Outlook calendar view to category view...but it won't show under the normal day/week/month view).
    What the heck is going on? I need everything to be correct on my PC always...not my iPhone (it would be great to have BOTH correct...isn't that how it's supposed to be?). Everyone in my house refers to my PC's Outlook to go by for events, appointments, etc. That's why my PC must always be the correct item, not my iPhone.
    Help!

    Just to respond to the comment above.
    Disk formatting and disk access security are two different thing.
    An Airport disk can be formatted as HFS+ and both Macs and PCs will be able to access it.
    Regarding "Security" which you setup on the Airport Extreme there are two option:
    a) "Secure Disks: With accounts": Here each user on your network will only be able to see and access the folders and files they uploaded to the Airport disk themselves. The disk (as hardware) is shared but data is not shared.
    b) "With a disk password": Here all users on your network will be able to see and access all folders and files on the Airport disk.
    I hope this makes things a little more clear.
    Karsten

  • Changing computers, can't "see" my files on IPod menu, but I can in windows

    I changed computers, and followed the directions, essentially: used my ipod as a disk to move files from old laptop to new laptop. Did all the steps of consolidating files etc. OK, no problem. Then I can see all the music on Itunes on new laptop. Restore and reset IPod and then synchronized. Files load to the IPod (I can see on the IPod when I view outside of ITunes (i.e. windows explore). But, when I try to play or view any files going through the IPod menus, there isn't anything there, nothing in music, podcasts, videos, nothing. If I plug the IPod into the old laptop, restore, and synch, everything is fine. I've tried this about 4 times and cannot get this to work. What am I doing wrong?

    Copied media files to a HPFS+ (journaled) SimpleTech USB drive connected to my iMac. Files copied fine and can be accessed from the iMac with no problems.
    I connect it to the TC, the drive can be seen and mounted over the network but the files do not show up. The free space corresponds to the free space left by the files I had copied--but again the files do not show up.
    TC file sharing is on and is working fine as demonstrated by access to the internal drive without problem. And the USB drive shows up in the airport utility without error indication. Files copied over the network to the USB drive are accessible as expected (read/write/delete--no problem).
    Any advice?
    Thanks,
    Mark

  • Can't see HIDDEN items in App Store

    When I view my App Store account, it says I have 2 hidden items. However, when I click to view the hidden items, it says I have no hidden items. The only thing I can come up with is that at some point in time, I had two apps hidden that have since been removed from the App Store. And since the apps are no longer there, I can't "unhide" them, but the Store still has them as hidden in my account profile.
    Any clues?
    Thanks,
    Bryan

    See: https://discussions.apple.com/message/23471396

Maybe you are looking for