Can't see content of Airport USB drive.

Just got my MacBook Air.
I have set up a USB drive on my AEBS, which I can access just fine via my old MacBook.
On my new MB Air, I can see the base station in the finder side bar. When selected I can see the name of the drive. When selected, I cannot see any files or folders on that drive. I can't read or write.
How should I set up the MB Air to allow full access to the Airport USB drive?
-Ron.

I'm having the same issues. Random folders throughout the server are not displaying their content. I can see the contents of these folders in Tiger, just not leopard.
I'm connecting to a Windows 2003 Server with Service Pack 2 using SMB, not AFP like Taliesin above.

Similar Messages

Can't see content in AirPort Disks

I have three LaCie drives connected to my TC via a USB hub. The drives mount OK but I can not see any contents (0 items) though the space available is correct. I suspect this is an issue with permissions but am not sure what permissions I need to change. Using AirPort Utility, under the Disks tab>File Sharing I have enabled file sharing with Secure Shared Disks set to "With Accounts".
If I select one of the drives and do a Get Info the owner is system (read and write), Group is wheel (read and write) and Others read and write. I have tried applying the permissions to enclosed items but this does not reveal the contents....
Any ideas??
Thanks
Tony

As a follow up, I can copy files onto the AirPort Disks so I guess the problem is that the files on these drives are not recognised as belonging to me (I guess external drives do not normally have specific owners). I guess that I will have to connect each drive to my machine directly and change the owner to my name, will this resolve the issue?? The negative of this would be that no one else would be able to connect.
My assumption in all of this is that AirPort Disks are only useful if you start off with an empty drive.

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

HT201514 I recently updated the Imac software, now i can't see my Wd back up drive in 'time machine' Its connected via firewire and i can see its connected if i check firewire on my mac.

I recently updated my IMac software to the latest version, now i can't see by WD back up drive in time machine. its conected to the firewire port ok and i can see it if i check firewire connections. The drive works ok on an old windows laptop. Any ideas.

leedssparky wrote:
Is it possible that i did this whilst updating the OS software whilst leaving the WD drive connected.
It's a good idea to eject and disconnect external HDs, just in case, but that shouldn't cause a problem.
Why when setting up time capsule, does it only look for WIFI drives through airport.
I think you're confusing Time Machine (the backup software) with a Time Capsule (Apple hardware combining a wireless router and HD). Unless you have a Time Capsule you want to back up to, there's no point to clicking the Set Up Time Capsule button, if that's what you mean:
I've attached the Firewire bus from system profiler, dont understand why i can see it there but not in TM.
There seems to be some sort of problem with the drive, since Disk Utility thinks it's fixed, but immediately the problem returns (per the first sample you posted).
How old is the drive?
If it's within the warranty period, you might want to contact WD or the place you bought it.

Computer can't get the apple mobile usb driver to install?

I get the error that the computer can't get the apple mobile usb driver to install so it won't show up on my computer or in itunes.It actually says Device Driver Software Not Sucessfully installed. Apple Mobile Device USB Driver failed. I'm using windows 7 which is fully updated, I have downloaded the newest itunes and also uninstalled and reinstalled it ans all of its components. I have followed every guide to sync your device to the computer and itunes, none of it has worked. I have unplugged my computer and tried it, I have taken the battery out of the computer and waited a few minutes and tried it. I have even gone into Device Manager looked under universal USB controllers and see an exclamation point next to the apple driver where its not working. I can click on it and tell it to look for the newest software and it says it's up to date and still not working. I have tried ever single usb advice or apple advice I can find over the last 3 hours and nothing is working. Please someone help me. I need to restore my ipad and I can't get it to show in itunes! please someone help!

Make sure Apple Mobile Device USB driver is properly installed.

ICloud + Apple mail; can I see content in mail folders on my mac?

Question for those who know iCloud.
If I am using iCloud + Apple mail; can I see content in mail folders on my mac?
Have 2 email accounts currently (yahoo and gmail), and use smart rules to move my email to them for organization automatically, issue is then I cannot see them on my iPhone mail, they are there, then "gone" when moved to the iMac folder.
https://lh6.googleusercontent.com/-MltXmqSQAXI/UkjrwPwtQmI/AAAAAAAAQk8/qwuOU7FFj dI/s720/iMac%2520mail.jpg

I don't see any evidence of an iCloud account there - do you actually have an @icloud.com address? iCloud syncs only its own email, it has no relationship to any other service.
However, if both your Mac and your iPhone are receiving, for example, Gmail, and you move a message on your Mac from the Gmail mailbos to a mailbox in the list under 'On My Mac' then this removes it from the GMail mailbox and as it's only on the Mac the iPhone cannot see it. In order to do what you want you have to create any new mailboxes on the GMail account itself and move the messages there.

I can't boot from OS install USB drive Mac Mini Model 1176

How I can't boot from OS install USB drive, Mac Mini Model 1176

Thank you Eustace Mendis for your answer.
I rebooted the Mac Mini holding the Option key down but it doesn't work. I used an USB drive with O.s 10.7 from Apple that I have used previuosly with other computers and I also tried with a CD install O.S 10.6
It seems that the Mac Mini can't recognize the keyboard inputs and I tried with 3 different keyboards but still didn't work.
I also reset the SMC and PRAM but I had no luck. Any clues?

Can't see Tiger installer in external drive

I want to reinstall Tiger from the disk after erasing my startup drive - on my G4, which has a broken superdrive.
Right now I have Tiger installed and when I insert the Panther installer in the external drive and restart, I can choose to boot from the Panther install disk. However, when I insert the Tiger install disk, I can't see it in the external drive. (I only inserted the Panther disk as a test.)
The Tiger install disk is black with a gray X.
Does anyone know why I might be able to boot from the Panther installer but not the Tiger installer?
Thank you,
Debbie

I put the Tiger DVD in the iMac and started in Target Mode - I see the firewire icon on the screen. I booted the G4 with the Option key held down, but I just saw the G4 startup disk and back and forward arrows.
When I chose the forward arrow, this is what I saw:
Default Catch
code 300 at
%SPRO: ff8494a0
%SRRI:0000b030
Paraphrasing now:
Welcome to Open Firmware
Type mac-boot return to continue booting
I tried typing mac-boot return, but got another version of the same screen.

I can't see two of my internal drives on my mac pro?

I can't see two of my internal drives on my mac pro? Any idea's or suggestions on how I can see them again. They were working last week just fine - Now they don't even show up in the finder? I have video stored on one and the other is just used for extra storage if needed - not really used much.

A drive that will not show BOTH its Make&Model AND a reasonable Size/capacity in Disk Utility has failed.
IF Disk Utility can see those things, use (Repair Disk) to attempt to repair its Directory. It takes about five minutes. If it finishes in 10 seconds, it just repaired the Partition Map and nothing else. Select the Macintosh_HD or whatever you renamed the Volume, and (Repair Disk) again.

How can I re-install lion via usb drive on my new mba(mid-2011)?

how can I re-install lion via usb drive on my new mba(mid-2011)?
I just removed all data from main hd, and my network is not good enough to be able to download the os via recovery hd re-installing way.
in other words, is there a bootable [mac os x lion dmg] for my mba that I can download?

If you are looking for a download link for OS X Lion, I do not know of one. However if you really need the operating system you can buy a USB drive with OS X Lion on it, ready to boot. I think they're $69 at Apple's store. What I would do is contact AppleCare via the Express Lane or just call them and tell them your situation and then they will definantly have an answer for you to point you in the right direction.
Good luck!

Can't see contents of USB hard drive connected to Time Capsule

Hi. I have a USB hard drive connected to my Time Capsule (which I just got today). I just want to use it as a shared drive, so that the users in my home can use it to access common files (media files, stuff like that).
The TC's set up is to enable file sharing with accounts. AirPort Disk Guest Access is not allowed.
When I authenticate as a user via Finder I can see the disk, see that disk space has been used, but can't see the contents. I'm guessing this is because the files that are actually on there belong to some other user.
Is my guess right? Any suggestions as to how we can all use it as a transfer drive?
Col

Fixed it. I connected the USB drive directly to my computer, and dragged the folder into the 'Shared' folder, which Time Capsule had created. The original folder is now visible, which is what I wanted!

Can't see shared Airport USB Drive on Network

I have a AirPort Extreme (5th Generation) with a USB drive attached. I am using OS 10.9.2 on my desktop and laptop. I can see the drive on my desktop Mac which has a ethernet connection to the Airport, but my laptop can't see the shared drive. I used Airport Utility (under "Disk" Tab) to Enable file sharing and share disks over WAN. I have set the "Secure Shared Disks" to "With a disk Password." On the laptop, I have set Finder preferences to see "External disks."
However, the disk does not show up on the Finder sidebar under "Devices" or "Shared."
Any suggestions on how I can make this "Shared Drive" visible?
Thanks,
Dave

Also make sure that Finder Preferences is set to show Connected Servers on the desktop.
Restart the entire network as well by powering everything off, waiting a minute, then starting the modem first, followed by the next device connected to the modem, etc until everything is powered back up.

Can Time Machine back up a USB Drive connected to Airport Extreme?

If I connect 2 USB drives to an Airport Extreme via a USB hub, can I use Time Machine to back one up to the other? I've found multiple discussions about how to use an Airport Extreme disk as a Time Machine backup disk, but nothing on this. I want to use one disk as network storage (i.e. use the Airport extreme as a NAS), but I need a backup solution for that disk.

That's disappointing. I actually have a separate NAS already, configured for RAID1: a ZyXEL NSA220. Worked fine when I only had windows machines, but isn't reliable with my MACs, and doesn't support extended journaled format, so I need a different solution. I was hoping to just use a USB drive attached to my airport extreme to replace it, but I can't do that if I can't back up that USB drive.
Can anyone recommend a good backup solution? Surely this can't be that uncommon a scenario?

Have AirPort Utility ver 6.1. Can't see printers or external hard drives. I could in earlier version. What gives?

With Airport Utility ver 6.1 can't see printers or hard drives. Dont' even see where to go for those screens. Was much easier in earlier versions. Question: How do I setup ext hard drives and printers in ver 6.1?

You don't need to "see" the printer for it to operate correctly using AirPort Utilty 6.1. If the printer was previously installed, it should continue to operate correctly. If you have a new printer, just install the device according to the manufacturers's instructions.
As far as being able to "see" a disk in AirPort Utility 6.1. Try the following:
Open AirPort Utility, click on the AirPort device, then click Edit in the next box that appears.
Click the Disks tab at the top of the setup window.

Can I stream content on AirPort Extreme to Apple TV?

Hello,
I am considering purchasing a AirPort Extreme. I am wondering if I can stream the content saved on the hard drive through Apple TV?
Thanks.

Do you have a hacked (JB is term used here).. atv1 or atv2 the answer is yes..
If you have a standard ATV or ATV3 which is not hackable.. then the answer is no. Your files can be stored on the disk plugged in.. but there is nothing in the AE to stream it... it is a router not a media computer. It has no brains.. at all..
See the poem.. Banjo Patterson. The man from ironbark. http://www.middlemiss.org/lit/authors/patersonab/poetry/ironbark.html
There were some gilded youths that sat along the barber's wall.
Their eyes were dull, their heads were flat, they had no brains at all;
That is what you need to think of the Airport Extreme.. it has a flat head.. dull eyes..no brains.. Same applies to the TC btw.. where other brands might include DLNA server, itunes server.. twonky media server.. apple has none.. So you must hava a computer running to pick up the files from the AE or TC to stream it to the network. so the ATV.. can pickup the stream and send it to video.

Can't see content of Airport USB drive.

Similar Messages

Maybe you are looking for