Can't see CR2 files in Adobe Bridge CS6

I have recently purchased Canon 5D Mark iii and have taken a few shots in RAW mode. When I try to open the file in Adobe Bridge CS6, I can't view the file.
I also have a canon T2i and the raw file from that camera show perfectly fine.
What could be the problem? All my CS6 software is up to date.

Updated to ACR 8.4? There is an issue:
The fix is to download a 8.4 again via the link below and follow the instructions to replace the existing 8.4 plugin:
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

Similar Messages

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

I can't see NEF files in Adobe Bridge

My Bridge doesn't show my nef files (taken by both d40x and d700). The thumbnails in Adobe Bridge S3 show the icon Nef but they don't show the image. I can't see the images in raw. If I click on the icons 'camera raw' opens and I can develop the nef files. I'd like to see the previews instead. I've downloaded the latest camera raw (4.6) and manually installed it but it doesn't work. The camera raw instructions say to install it in:
Common Files\Adobe\Plug-Ins\CS3\File Formats
but I have this directory instead:
Adobe\AdobeBridgeCS3\plug-ins
Who can help me?!
Thank you!

ant3774 wrote:
Common Files\Adobe\Plug-Ins\CS3\File Formats
Yes, it must be in a location above and nowhere else. Only one version is allowed in this directory.

Someone who can help me to do. Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

Someone who can help me to do. Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28

be sure to use the correct update (32 or 64 bit).
http://www.adobe.com/downloads/updates/

Can't view raw files in Adobe Bridge CS4

Hi,
I bought a new iMac OS X version 10.8.5 . I have a Canon 5d Mark ii and I shoot in RAW. I installed CS4.. I also downloaded the newest version of the camera raw plug-in (5.7). I placed the plug-in in applications--> adobe photoshop CS4 -->plug-ins--> file formats.
In Bridge, I can only view the grey thumbnail that says CR2. I can click on it and it'll open up into camera raw where I can edit some and then open it into photoshop. I want to be able to view the images in bridge to know which ones I want to open up in camera raw. Also, when I right click on the thumbnail there isn't an option that says "open in camera raw".
Should I also place the camera raw plug-in in the applications-->Adobe Bridge-->plug-ins?
When I click on about plug-ins on photoshop, it's showing me 2 camera raw plug-ins.. version 5.0 and version 5.7. I can't find 5.0 to delete?
Thanks

If you just go to Help>Updates, Bridge should take care of this for you, unless you've managed to get multiple copies of the plug-in into the folder. If you manually installed things, check to see that there is only one plug-in there, then let Bridge do it for you.

Can't open raw files in Adobe Bridge CS4

First of all, I use a macbook pro that runs on Leopard. My camera is 5d Mark ii. I have photoshop elements 8 for mac, but I love to use Adobe Bridge CS4 for basic editing. Here is my problem, it won't let me open raw mode to edit. I have tried the updates photoshop gives on their site, but no luck. I still can't open them. Please help me!

If you just go to Help>Updates, Bridge should take care of this for you, unless you've managed to get multiple copies of the plug-in into the folder. If you manually installed things, check to see that there is only one plug-in there, then let Bridge do it for you.

Can't see CR2 files in Photoshop CS5

How do I get Canon SX50 HS CR2 files to appear in Photoshop CS5?

Hi. Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

Can't open NEF files in Adobe Bridge CS4

My camera is a Nikon D90 and I downloaded the Camera Raw.plugin Version 5.2. to open NEF files in Photoshop and Bridge from the CS4 collection. It works perfectly to open NEF files in Photohop but Bridge is not able to show the files. I cleared the cache already.
Does anybody know, what the problem could be?
Thanks for your help!

Maybe the plugin is in the wrong folder? It should be in the Common Files/Adobe folder tree, rather than the Adobe/Photoshop CS4 folder tree (where only Photoshop can see it). Also, make sure there's only one Camera Raw.8bi installed.

AE can't open files in Adobe Bridge

I have been using CS4 AE for a few months now, suddenly I can not browse my presets in Adobe Bridge. Even if I go to file_Reveal in Adobe Bridge, nothing comes up, nothing_no file shows up. I looked at Adobe Bridge, AE does associate with the Bridge.
No problems with Premiere and PS. Any place can I tweak to make this work?
Please help!

Thanks again for your help.
I went to Edit_Preferences and can see the Bridge be started on Login. The Startup Script shows the Bridge is associated with all programs in Premium Studio. My Quicktime is up to date. As I said before, there is no problems with PS or PPRO.
I have found that if I open AE, then go to File_Reveal in Bridge or Browse Presets from AE, there is nothing shown up, i.e. no response from AB. But then if I open the Bridge from Start Menu when AE is opened, it will show what I requested from AE.
What do you think? Is startup script corrupted? Thank you again.

Viewing .nef files I can no longer view my nikon .nef files in adobe bridge.

Please help. I used to be able to view .NEF files in Adobe Bridge but now they do not open. I tried to open them in PS by double-clicking but I get the message.....could not complete your request because it is not the right kind of document.

As a start you should update your profile it still says you are using 10.6.1 and including the Aperture version would be a good thing also. So have you upgraded to 3.2.1 yet? If not you should.
As a start you should look at Aperture 3: Troubleshooting Basics and see i that helps.
Post back
regards

Can I change the location of files in Adobe Bridge

I have a small SSD for my program files. Adobe Bridge is usingit to store image data and I believe backups of the images. Can I agjust the locaion of these files?

Can I agjust the locaion of these files?
You can go to Bridge preferences cache section and inhere you can select another location for your Central Cache file which store all previews (and can grow very large indeed).
However if you have the option to build another SSD internal this is preferred above external and normal disks. A fast reading and writing disk with a fast connection will speed up your workflow

How can I see CR2 photos in Bridge (using Win 8.1 Pro 64.bit). With Win 7 Pro there is no problem.

How can I see CR2 photos in Bridge (using Win 8.1 Pro 64.bit). With Win 7 Pro there is no problem.

There is a Bridge Forum:
Bridge General Discussion
You may want to mention the camera type, though.

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop I get an enlarged version of the

I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?

And there is the problem. Your pictures are opening up in Mac's own Preview app.
Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
Selecting a program to open a certain file is called: File Type Association.
You can choose this at the MacOS level or the Bridge level.
Here's how to do both:
Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
Go down to the "Open with" section of File Info.
Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
Then open Bridge and see if double-clicking opens it in Photoshop.
Now that means all jpegs on your Mac will open in Photoshop. Maybe you don't want that.
You can set your jpegs to open in Preview when Bridge is closed.
When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge.

Can't see CR2 files in Adobe Bridge CS6

Similar Messages

Maybe you are looking for