Can't see created Software Component in CMS

Hi
I have created a software component in the SLD (NW 2004s SP2). Now i want to develop it. But when i try to add this software component to my track in the CMS, i can't find it. I suggested in an another forum post, i try to push the "refresh" button in the CMS but it doesn't help.
Thx 4 help

Hello Marc
...its very strange. Now i have the same problem as before. I think i solved it, but i'm wrong.
There is a button labeled "synchronize dependencies", but no solution for my problem. I have create 2 software components in the SLD. One without any dependencies and one with 3 other software components dependencies. I made two tracks in the CMS and import them into my NWDS. Then i remember, that my defined dependencies are wrong. So i delete both tracks in the CMS. In the SLD i decide to delete one software component and edit the other one. I add my needed software components in the SLD to my custom software component. Now i create a tack again and want to add my custom software component, BUT there are shown both old software components in the table, where i can select/search my custom component. If i press the "synchronize dependencies"-button, nothing happened.

Similar Messages

  • Can't see any software component in CMS

    hi
    i configuring EP6.0 JDI  i have done all the SLD configuration my DTR CBS CMS r working but when i try to make any new track i can;t see list of software components to choose to make track but i can see all these in  software components in SLD software catelogue.
    please help to resolve this problem
    thanks

    Hi,
    Please update the CMS by clicking on Update CMS button. This will ensure all that all SC are available in CMS also.
    Regards
    Sidharth

  • Sproxy: Can only see Basis Software Component

    Hi Experts,
    I am working on 7,4 dual stack PI.
    Recently done with all the configurations in PI .But now I want proxy communication with ECC.
    For this I created one H type and one G type RFC destinations in ECC to fetch ESR object from PI.
    For now I have create only one SWC in SLD of PI and imported it in ESR .Created one Namespace under that.
    But ,when I run SPROXY in ECC, it shows only SAP BASIS 7.4 software component and not the other SWC of ESR.
    Do we need additional configuration for each of SWCV to get displayed in ECC SPROXY???
    I refered the IDES system , in that too I noticed one thing that , out of all the SWC created in ESR of PI only few are diaplyed in IDES ECC SPROXY
    why so?
    Thanks in advance..

    Hello
    What is the NetWeaver release of the ECC system and the SP release?
    See note 1528587 PI ESR Content Objects are not visible in SPROXY, for a description of how/why this can occur.  But it may not be the same in your case.
    Regards
    Mark

  • Can we change the Software Component Version's Name?

    Hi everyone,
    Can we change the Software Component Version's Name in the Integration Repository? If we can, how can we change it?
    Regards,
    Nick

    hi Nick,
    Procedure:
    1. create a new software component in SLD
    2. create a new version of this software component in SLD
    3. import in into the repository
    4. try using release transfer to transfer objects
    from old on to the new one
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
    5.delete the old software component
    /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
    BTW
    <b>do not chage it in the database!</b>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Can I assign one software component to multiple products

    Hi
    Let me know Can I assign one software component to multiple products if so explain me in detail.

    See this
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/content.htm
    <i>4. To view details about a software component, choose the Software Components tab.
    5.From the Software Component dropdown box, select the software component whose details you want to view.
    A table with software component versions appears.
    6.Select the software component version whose details you want to view. Choose one of the following tabs:
    General
    Displays general details about the software component version.
    Products
    <b>Displays the products, which contain the software component version</b>.</i>
    At this location u can see multiple products for one SWC
    Regards,
    Prateek

  • I can't see the epma component in workspace even its up and running also ca

    i can't see the epma component in workspace even its up and running also can't see the planning applications in workspace even i log in as admin

    Has it ever worked, anyway try running the config utility again and configure the foundation web server
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Am not able to create software component in SLD

    Am not able to create software component in SLD,
    It shows the following error,
    First i got this error.
    [NWMss][SQLServer JDBC Driver][SQLServer]Attempt to fetch logical page (3:505360) in database 'ENW' belongs to object '861818472', not to object 'BC_SLD_INST'
    Now am getting this error.
    NWMss][SQLServer JDBC Driver][SQLServer]Warning: Fatal error 823 occurred at Aug 17 2007  2:21PMB??. Note the error and time, and contact your system administrator.

    Hi
    Please restart your XI Server, SLD,J2EE Engine.
    Thanks

  • Can not view a Software Component Version in Enterprise Services Repository

    Hello,
    I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
    Into to work area select  Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
    I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
    Do you have any idea?
    Thank you in advance.
    --erva

    Hi,
    as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
    and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
    Mickael

  • How can I see my software update history?

    Hi guys I just wonder how can I see my system software update history?
    on Lion we can see in Preferences/Sofware Updates/History but Mountain Lion we dont see to same place?

    go to applications - utlilities - system information.app - software - installations
    this may help you

  • How can i see created stored procedure from oracle?

    Hi All
    could any one help me?
    i have created procedure Insert_Profilebasicdetail and more in oracle 10g
    now i want 2 see the structure or code for the created procedure
    how can i see?
    Thanks
    Edited by: Ajay Patel on Sep 25, 2008 2:18 AM

    Hi,
    If you want to know the paramters of the procedure or decalaration jist use describe
    14:53:56 SQL>desc dba_verify_db_current_schema
    PROCEDURE dba_verify_db_current_schema
    Argument Name                  Type                    In/Out Default?
    IN_USER_NAME                   VARCHAR2                INIn Order to know the Source Code.. you might have got the reply.. from the Earlier Response... !!
    - Pavan Kumar N

  • Unable to create software component version

    Hello All,
    I am unable to create software components for products for non SAP systems. Whenever I try adding new software components I get an error on the production state
    Value not allowed by VALUEMAP for property SAP_SoftwareComponent.ProductionState:Released
    I tried with all the production states.
    Any ideas? I am using NW2004S SP7.
    Regards,
    Sudheer.

    Hi,
    I had the same problem reg. SLD used in my SAP XI system (a NetWeaver component).
    You should upgrade your Java part of the application to Service Pack-SP (at least) 5. I found more information in the SAP Marketplace:
    https://websmp209.sap-ag.de/upgrade
    https://websmp209.sap-ag.de/sp-stacks
    and the Support Package Guides:
    https://websmp209.sap-ag.de/instguides (under SAP Netweaver -> Realease 2004s -> Maintenance)
    These links could be also helpful to you.
    Regards,
    Katarzyna

  • POWL: Can't see POWL detail component when POWL is embedded

    Hi,
    I created a POWL which is embedded in another WD-Component. This WD-Comp contains 2 views, one which embedds the POWL the other which is the view the POWL should use as detail component.
    The problem i have is that when calling the WD Comp. the POWL doesn't show the detail component, while it does when calling the POWL directly.
    Can someone give me a hint what went wrong?
    Thanks
    Harald

    What I want to achieve is following:
    I need a worklist(POWL) and for each item in the worklist I want to see details (as POWL detail component).
    The POWL is inbedded in a webdypro view (let's call it V_MAIN) in WD-Comp "A". For the detail component I need also a view. So my naive idea was to create this view (call it V_DETAIL) also in WD-Comp "A" to have everything that belongs together in one component. Of course I implemented the respective interface I need for POWL Detail Components and I also created separate window for view V_MAIN. V_DETAIL has anyway a dedicated window POWL_DETAIL.
    As mentioned in the initial post I have no issue if I call the POWL directly only if I call it via the wrapper view V_MAIN.

  • Can't see created folders

    Hello!
    I can create folder in Presentation catalog, but then I don't see them in Answers??
    But until yesterday I was able to manage folders normally.
    Any idea?
    Thanks

    However, after I created and saves a Answer report I was able to save it in this folder and I was able to see it.
    Is this normal that the folder has to have an object in it to see it in Answers interface?

  • Can I see what software a serial number is for ?

    I get an error when entering the serial number and I thought maybe I have chosen the wrong software to install (CS Design Standard, maybe I should try download other variants) ?
    I do not know what software package the license is for so can you tell by the numbers what to install ?
    Thanks,
    Matt

    I believe you maybe misunderstanding the program a bit. If you were to subscribe for a single app yes you would be close in the price per month ($19.99/month). However Adobe has discounts for subscribing to multiple apps per month.
    The Photography is two programs Lightroom and Photoshop for $9.99/month
    Complete is 29 programs for $49.99/month
    https://creative.adobe.com/plans?promoid=KLXMK
    Financially speaking $9.99/month would be the best deal if you were to try it. There is an annual commitment to consider as well. At the end of the year you have the option to cancel. All data that belongs to you stays on your computer so you will not loose any data by trying it for a year.
    Because I am talking about the Adobe plans I am required to mention that in the future I may be receiving promotional gifts for helping out.
    Good luck in your decision.

  • I can't see XML DB component trying to install it in database 9i

    Hi
    We are trying to install APEX on our old database 9.2.0.4 (patched to 9.2.0.8).
    APEX install requires XML DB component in database, but we're pretty sure that it's not installed
    (there is no user XDB and 'select comp_name from dba_registry' doesn't show signal of that component).
    Original CDs are lost, so we downloaded from e-Delivery the following files:
    B14882-01
    B14883-01
    B14884-01
    But when we go to Universal Installer, XML DB component is not shown in installed/not-intalled list.
    Our box is an ORACLE UNBREAKABLE LINUX Enterprise 4.5 x86-64 bits
    Does this component have another name?
    How do we install XML DB component?
    Thanks in advance
    Oscar

    Hi,
    Check the following link will help you
    http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/appdev.920/a96620/appaman.htm
    Or
    check the following note:
    https://metalink2.oracle.com/metalink/plsql/f?p=130:14:7431989769142239402::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,243554.1,1,1,1,helvetica
    XML FAQ's
    https://metalink2.oracle.com/metalink/plsql/f?p=130:14:7431989769142239402::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,416132.1,1,0,1,helvetica
    Regards,
    Taj
    Edited by: Mohammed Taj on Jul 11, 2009 8:43 PM
    Edited by: Mohammed Taj on Jul 11, 2009 8:48 PM

Maybe you are looking for

  • SCHEMAS: Error re-assigning schema to a different workspace

    SITUATION - Apex 4.0 on 11g - Trying to edit workspace to schema assignments - Following instructions here (http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/adm_wrkspc.htm#BABBEEGC) - Have done this successfully before ERROR Get the fol

  • Issue while doing Java Stack Installation on NW 7.0 on oracle 10g

    Hi All, I am facing issue during Installation of JAVA Stack on NW7.0 on Oracle 10g SecureStoreCreate.log java.lang.reflect.InvocationTargetException         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)         at sun.reflect.NativeM

  • JRun 4 Windows Authentication

    Hi ALL I am trying to configure windows authentication on Jrun 4 web server. I configured windows authentication on Tomcat successfully using NtlmHttpFilter. Is there any possiblity I can do it in JRun4. or any ideas or suggestions... Please help me.

  • Safari is unable to connect to websites

    Okay, Safari works without a problem on my computer, unless I visit www.nfl.com (it works perfectly on all other computers). When I attempt to load this site, the Safari does not finish loading it. If I hit "Stop" and attempt to visit other sites, I

  • Airport Extreme 802.11n + NetGear WGR614

    Just got new AirPort Extreme 802.11n base station and have it set up fine with my iMac and Apple TV. I had planned to continue to use my existing Netgear WGR614 as an 802.11g access point so that when I connect my iPhone I do not degrade the speed of