CAN'T SEE DESKTOP AFTER LOGON, ONLY BLUE BACKGROUND AFTER PROMOTE A DOMAIN CONTROLER

Hi, my name is Omar
I promoted two domain controllers yesterday with Windows Server 2008 R2. Both work fine as a domain controllers role but when I logon, I can't see desktop, I only see a blue background, I 'cant see any desktop Icon. We have already had that problem and i
remember that we change a value on a registry key but i can't remeber what was exactly.
Thanks for your assistance
ovazquez

Hi,
Thank you for posting in Windows Server Forum.
Firstly please update the driver and in addition you can try below registry workaround.
To do this, change the value of the following registry subkeys to 3 (Manual) or 4 (Disabled)：
•HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\cdrom
Name: Start
Type : REG_DWORD
Data: 3 or 4
•HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\parport
Name: Start
Type : REG_DWORD
Data: 3 or 4
Note: If the above registry is changed to 4 (Disabled), the related device is not usable because a driver used in the device is not loaded. Therefore, if the device will be used in the future, the above registry should be set as 3 (Manual).
More information.
1.KB 933757
2. Event ID 7026 — Basic Service Control Manager Operations
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Can't see desktop with blue screen after login

Hi
we have a server 2008 ent SP2 that sometimes when use remote desktop or via vmware console to access this server, after login we got blue screen and can't see desktop. after force reboot it recovery.
From application log, we find some error:
Description (Event ID: 1000):
Faulting application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, faulting module msshsq.dll, version 7.0.6002.18255, time stamp 0x4be071d5, exception code 0xc0000005, fault offset
0x000063fd, process id 0x1300, application start time 0x01cf9a43236d46dd.
Description(Event ID: 9009):
The Desktop Window Manager has exited with code (0x40010004)
Description(Event ID: 1530):
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-249263827-1212357926-315576832-391740:
Process 3812 (\Device\HarddiskVolume1\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-249263827-1212357926-315576832-391740

Hi,
In general, event ID 1530 means there are some data in the user profile are still be accessed when the user log
off from the Terminal Server. Please check if any of the data is still remained in the user profile supposed to be deleted. You can use Process Monitor or Process Explorer in order to find the software which is using the data and find the solution. If there
is no such data remained, the Windows have possibly stopped the process and deleted the data when log off. In such a case, you can ignore the Event 1530.
In addition, I recommend running SFC /Scannow from an elevated command prompt and check a dump file for Windows
Explorer under C:\Localdumps.
Besides, you can also download
Autoruns to troubleshooting Explorer issues. Please run Autoruns as Administrator, go to Options menu, Filter, select Hide Microsoft Entries and Ok. After that, open the Explorer tab,
and you will see all DLL that are running inside File Explorer, so start disabling and testing if Explorer crashed.
Furthermore, the KB below may be helpful:
http://support.microsoft.com/kb/961038/en-us
Best regards,
Susie

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

When you enable photo stream on your Mac, in imports photos currently in your photo stream. However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them. When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99). Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

Hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

I can not see my albums artwork only on my iPad

I can not see my albums artwork only on my iPad! What should I do?

Hello JChalups,
It sounds like your phone has calendars that your iPad no longer shows. First verify that the same calendars that are on your phone are stored in iCloud by checking the calendar at http://www.icloud.com. I would use the iOS troubleshooting section of the following article on your iPad. If not, then use it on your iPhone instead:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Regards,
Sterling

I hear a lot of disk I/O from my iMac 1TB drive. How can I see apps may be running in background? Time Machine is not running.

I hear a lot of disk I/O from my iMac 1TB drive. How can I see apps may be running in background? Time Machine is not running.

If you wnat to see the applications that are running, open the Activity Monitor application (it's in /Applications/Utilities). After opening it, select "All Processes" above "Show" in the toolbar, and you will see all the processes that are running.
I/O errors often happen on a damaged hard drive. If you are receiving that error, you should make a backup with Time Machine or Carbon Copy Cloner as soon as possible and take your Mac to an Apple Store or reseller to get another hard disk.
If the warranty is void, you can try installing it yourself, but note that there are some iMacs which are very difficult to have the hard drive replaced. Search the steps in iFixit > http://www.ifixit.com

Can't see TimeCapsule from Laptop, only desktop!?

Hy, I would realy appreciate some help with my problem!
After updating the airpot software and the firmware software, I'm unable to see the Time Capsule HD from my laptop. I had the same problem with my desktop, and after installing the old version of airpot and firmware software I started to see the HD Time Capsule again. I tried to install the same version of the airport(5.3.2) in my laptop, but I still can't see the time capsule hd from my laptop, only from desktop. I'm using the 7.3.2 firmware in my capsule. I lost the entire day uninstalling and installing all the possible version of software and I could only make my desktop work with airport 5.3.2 and firmware 7.3.2, but the same combination in the laptop is not allowing me to see the HD of the time capsule. I've already tried wireless and cable for installing and truing to locate the HD. I can not find this steps in my computer " In Finder go to preferences and check connected servers to show on desktop" . Can you please help me? Thanks a lot for you time and attention!

Hello Placido and welcome to the discussions!
"I can not find this steps in my computer In Finder go to preferences and check connected servers to show on desktop"
Here are the steps:
Click on the Finder icon on the dock at the bottom of the screen. The Finder icon is usually on the far left of the dock unless you have moved it. Or, just click the desktop in a blank area.
Now at the top of the screen, you will see the Apple icon and Finder-File-Edit-View-Go-Window-Help. Click on Finder and then click on Preferences.
Click on General. Look for the words "Show these items on the Desktop"
Make sure that there is a check mark next to "Connected servers".
That is it.

Can't see desktop

I bought a mac mini with 20 inch Cinema display, a few weeks a go and it has been working fine up to now..
Yesterday I woke it from sleep and would not come up. I restarted, and the display started up as normal, however, the OSX starting-up box seemed to complete faster than normal, then instead of showing the desktop or a log-in box, it shows a blue screen. I can still see the cursor and move it, but thats all.
Have checked all cables, rebooted, changed PRAM, reinstalled OSX (archived mode). Have also connected the monitor to my G4 powerbook and it works fine.
Appreciate any help to sort this out.
Thanks,
Peter

Thanks for this Wade - very useful, after a bit of programming I am back up again. Seems I had an "incompatable start-up item, that had to be reduced to a single user".
Appreciate the help.
Peter

HomeHub can't see desktop

We've just got a new HomeHub with the new connection to BT Broadband. My laptop connects wirelessly without problem, picking up the first available DHCP address. I cannot now get the desktop to connect. It has a Linksys adaptor which worked perfectly with the Thomson router we've just replaced.
My problem is that the desktop sees the HomeHub, the HomeHub cannot see the desktop and will not assign it a DHCP address. I've tried to give it a fixed address manually, but this doesn't work either. The desktop thinks its connected but it isn't.
Any ideas as to what I can do next? Desktop owner is tearing hair out....
Kate

Can you ping the homehub from the desktop? I think the address of the HH should be 192.168.0.254. I'm puzzled as to how you know that the HH can 'see' your desktop. However, I don't use the BT supplied HH so it might have some facility for doing that.
It might be useful if you posted details of which operating system you are using on your desktop and laptop.
Another thought - can you see the shares of your desktop on the laptop and vice versa?
I'm no expert on these things - they are just things that I would check. Others on this forum are much better qualified tha I on sorting out network problems.
wedding
Mistakes and embarrasing goofs in e-mails are only discovered when you've sent them!

Can't see desktop items

hi all, my mac froze and the only thing i could do was turn it off using the power button at the back. now i can't see any of my desktop icons or folders. i know there still there as there still showing in spotlight.

This is not a virus. This is serious data corruption, and or driver issues, or directory issues. Time Machine will only be useful in one respect is having a backup to a point with your data before these events started happening. You on the other hand should start taking Time Machine like steps today, and not wait around for Leopard. My FAQ here explains how:
http://www.macmaps.com/backup.html
Once you are backed up, we can analyze what issues are plaguing your machine.

Can't see photos in Iphoto6, only in spotlight. Why? HELP!!!

I was filling files and albums from my rolls (about 2000 photos), reopened iphoto to see that the library is totally empty.
When I try to open the library file from any site, including home the messge is :
Unreadable Files: 1
The folowing file could not be imported. (the file is in an unrecognized format,)
When I go to spotlight, and search for all the jpg files, I see the photos all there.
How do I repopulate the iphoto?

It appears that the Library6.iPhoto database file for your library got corrupted. I suggest you do the following to get a new library up and running with the same rolls as the old library:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos. One user reported that with a library of about 5,000 images it took about 12 hours so plan ahead.
Damaged dB files have not been successfully repaired. For the future read this tip:
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can I see the last logon of one user?

Hi experts!
I need to check the last logon of one user.
How can I check that?
Thanks a lot!

Hi Carlos,
You can check the users last logon to SAP from :-
SE16N - Table USR02
<b>Last login is TRDAT - Last logon date
LTIME - Last logon time</b>
Thanks,
Vinay

I can't see the group ripper in premiere pro after 2014.1 update, and 2014.2 did not fix.

Please someone help me fix this I am literally going crazy as I have to edit in my notebook and am constantly hooking it up to different monitors, which calls for a different workspace most of the time. Thanks in advance.
To be clear I can not see the group ripper and therefore have to reset my workspace every time I want to redock an undocked panel group.

Click on the name and drag.

Can't see files on NAS only Folders?

Strange question - I just had to do a data retrieval from a Windows 7 disk from a PC before I reinstalled the operating system. (my daughters form work, It crashed). I used a Hard Drive Docking Station to read the drive and stored them on my NAS (A Windows HP Server)using my iMac. I have a lot of my stuff there, When I copied the Folders I wanted they all showed up on the Server, but when I drilled down to see the files it was blank??? I thought for a minute that whatever had happened to the PC has deleted all the files but just to make sure I started up an older Windows Laptop I had abandoned a coupel years ago and connected to the NAS and in fact all the files within the folders are there. I never had this happen before and can't explain it. Is there any reason why when I view the Folder from a MAC that I can't see the files that were written on a PC but copied to the NAS by the MAC?
I know, dump the PC and get her a MAC. Trust me I've already told her that....

Welcome to Apple Discussions!
Is Spotlight indexing the usb stick? Check the menu in the upper right.
If it is, wait for it to complete.

How to grant LOGON ONLY Rights to two users (no domain admins) on Domain Controllers

Dear Techies,
I wish to grant LOGON ONLY Rights to two users, who are not the members of Domain Admins, on Domain Controllers.
Can someone please suggest the best and easiest possible way to do this keeping up with Compliance?
Regards
Amit Kumar

I think it is by design, the readers don't have access to the operations and application management section. If you look at the URL's you will notice they are of the form http://servername:portnumber/_admin/operations.aspx and http://servername:portnumber/_admin/applications.aspx. Giving read only access to these pages means, they will be not able to modify the settings on these pages.
Looks like it is not possible to give read only access.
Thanks,
Prashanth

CAN'T SEE DESKTOP AFTER LOGON, ONLY BLUE BACKGROUND AFTER PROMOTE A DOMAIN CONTROLER

Similar Messages

Maybe you are looking for