Can't see difference between new posts and old ones.

Hi
This may sound like a silly question......but why I can't see new posts everything looks the same, no indication of new posts.
It's very silly not to be able to see new posts.
Tony

Agreed guys ! We risk to not answer to someone, because we don't see that the thread has been updated. Before it was very easy to do that, now it' quite difficult :-(
Paul

Similar Messages

  • Difference between New ETL and Old ETL

    Hi All,
    In old ETL process we first have a InfoSource (Can be connected from DataSources from Different Source Systems). We have 1 set of Transfer Rules. Again if there are different definitions to be loaded into different data target we define them in Update Rules.
    What incase of new ETL is the purpose of maintaining 2 transformations (Replacing Update Rules and Tranfer Rules). Can't we directly define different transformations on DataSource itself. Where the requirement comes that we define two transformations with InfoSource in between.

    Hi Ravi,
    What incase of new ETL is the purpose of maintaining 2 transformations (Replacing Update Rules and Tranfer Rules). Can't we directly define different transformations on DataSource itself. Where the requirement comes that we define two transformations with InfoSource in between.
    .here is the requirement
    suppose thr are some modification required to be done in an infoobject value ..suppose the value '1' is to be replaced by 'Y'  in an infoobject for all data targets...then such a modification will be put in the transformation from datasource to infosource and after that individual transformations are applied from infosource to different data targets,these transformation are data target specific rules..like update rules..in this case u only had to write the rule for 1-->Y once in first transformation ...
    So in short .. transfer rules as well as update rules are now called transformations.....
    yes u can directly define transformations on datasource itself as well ..infosource is not mandatory
    Mann

  • Difference between New Formula and Formula Variable

    Can any body explain what is the difference between  New Formula and Formula Variable.
    Thanks

    Hi,
    Formula:http://help.sap.com/saphelp_nw04/helpdata/en/d3/8057f830a911d4b2be0050dadfb23f/frameset.htm
    Formula Variable:If you want use variables in the formulas of a form, you need to use formula variables. You can use formula variables only in form reports, and must define them in the form itself. They can be replaced in the same ways as text variables when you execute the report.
    http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db0b1555411d189660000e829fbbd/frameset.htm
    Bye
    Dinesh

  • Difference between HTTP Post and Webservice call

    Hi,
    Can anybody let me know the difference between HTTP Post and Webservice Calls and also how each one of them is acheived through BPEL.
    Thanks,
    Adi

    Hi Adi,
    The protocol may be the same but the "idea" is different...
    I recommend you reading this:
    http://www.w3schools.com/webservices/ws_intro.asp
    Cheers,
    Vlad
    Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points.

  • Difference between New Archieve and New Patch

    Hi,
    I am going through import and export topics of LCA files (http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000276.html ). I understood how we can create new Archieves and import it to another environments. But I am not able to understand about patches.
    In both the cases, I am doing the same thing. I am creating archieve of the application. I am sure, there would be difference between "new archive" and "Patch" but not able to figure out.
    Can anyone let me know if I create new archieve and Patch, then what is the visual differences i can look in both the archieves??????
    Regards
    Sunil

    patching is related to component of LiveCycle.
    these are  basically jar files updated with new one. For more please look here.
    http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000960.html
    LCA files are simply archive file of the processes/application that you create in workbench. These archive files can be import to other environment  at later stage.
    -Vijay

  • Difference between copy value and use one as many

    hi
    what  is the difference between copy value and use one as many?
    thanks

    [http://help.sap.com/saphelp_nw2004s/helpdata/en/26/d22366565be0449d7b3cc26b1bab10/content.htm]
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm]
    Much better understanding of UseOneAsMany: [http://help.sap.com/saphelp_nw2004s/helpdata/en/38/85b142fa26c811e10000000a1550b0/content.htm]
    Edited by: Praveen Gujjeti on Feb 18, 2010 11:42 AM

  • Difference between new network and extended network

    Difference between extended network and new network settings

    An "extended" network acts as one large wireless network. Wireless devices can roam anywhere a signal is present and stay on the network without having to make any changes.
    A "new" network will require that a wireless device manually "switch" to that network and enter the password for the network to connect whenever you want to use that network. In other words, a "new" network will use a different wireless network name and password, which will require that you manually log on to that network.
    The exception would be if you created a "new" wireless network and used the same wireless network name, same wireless security settings and same password as the "main" network and connected the AirPort back to the main router using an Ethernet cable. In that case, you would have an "Ethernet extended wireless" network.

  • Difference between "new classname()" and  class.forName("...")?

    Hi,
    Please clarify me : What is the difference between the instnce creation by using new operator *( new ClassName())* and instance creation using class.forName("fully Qualified Name");
    thanks
    Gaurav

    The compiler can tell you whether new ClassName() will be valid. For the other, you have to wait until runtime to know for sure.
    new ClassName(...) can be invoked with arguments, and you provide them directly and simply. If you want to reflectively create an instance using a constructor that takes arguments, it's a more convoluted process.
    Using new, you know which checked exceptions can be thrown and you catch them directly. Using reflection, you have to catch some other exception and unravel its cause.
    You can use reflection (Class.forName and its more complicated cousins) when you don't know the classname at compile time.You can't do this with new.
    Don't use reflection unless you have to. It's more complex, somewhat less performant, and it denies you certain compile time checks.

  • What is the difference between new thread and new execution?

    What is the difference in creating a new thread and a new execution. Basically, what is the difference between thread and execution?

    Try this link...
    http://zone.ni.com/devzone/cda/tut/p/id/4823
    Thanks,
    PH

  • Differences between my MBA and old MBP

    I've noticed a few differences in the behavior of these two computers, and I prefer the OLD way better, but I can't figure out how to do it.
    In the past, both my iMac & MBP allowed me, in Mail, to use my mouse/trackpad to select a whole string of emails at once, either by just scrolling down, or by holding COmmand as I clicked on each email. I could then delete the whole bunch at once.
    But now, on the MBA, I can only select and delete one item at a time.   Is there a setting somewhere I am missing?
    On the old computers, I could wake my computer by moving the mouse.  Now I have to hit a key to wake from sleep.  Not a biggie, but old habits die hard! :-)
    Other "new" stuff I see on the MBA:
    Under DEVICES in the FINDER, I see a "Remote Disk" that has nothing in it, and that I cannot remove. If I look in GET INFO, it gives me no information, other than a box I can check to Lock it.  What the heck is this?
    Oddly, while I CAN charge my iPhone via the USB port, it will not charge my Nook via that same Port.  And when I try to attach an external hard drive using a USB hub, it won't see the EHD - but that same hub allows me to charge the iPhone, or attach a mouse.
    Battery seems to last FOREVER! :-)

    I can help with one of those questions -- the Remote Disk. Since the MacBook Air does not have an optical drive, you can use remote disk to share another computer's optical drive. The following has information: DVD or CD sharing: Using Remote Disc

  • Difference between Adaptive webservice and deprecated one

    Hi Experts,
       Plz anyone tell me the exact differences between  Adaptive web service model and deprecated model.
    Also plz explain how an adaptive web service is working.
    Thanks in advance,
      john

    Hi John
    In old webservice No support to import URL which requires authentication but in adaptive web service
    Allows importing WSDL through URL which requires authentication
    In old web service Logical Ports are available at design time
    In adaptive web service Logical Ports are not available at design time
    In old web service No direct support for nested structure, thus application programmer has to manually bind the
    In adaptive web service Direct support of nested structure , no such manual binding is required
    These are the diffreense between old web service and adaptive web service
    Regards
    Ruturaj

  • Difference between FI Posting and Payment Posting

    Hello Experts,
    Can anyone please throw some light on the use of Program "H99_POST_PAYMENT" (Payment Posting Program - PC00_M99_PPM)?
    What does this program exactly do? Anyone who can answer me interms of Technical and Business Perspective.
    Also how is this program different from Traditional Posting Program (RPCIPE00 / PC00_M99_CIPE)?
    All inputs are appreciated.
    Thanks,
    Janga K.

    Program "H99_POST_PAYMENT
    Purpose
    All payments are posted automatically with this report.
    Features
    If you have performed posting to Accounting (FI/CO), all open liabilities from Payroll are placed on the relevant liabilities accounts accounts, as well as the payments to employees.
    In the standard system, as the payment medium is created for the payments to employees from HR, the system does not mechanically generate the corresponding liabilities accounts. Neither the DME preliminary program (programs RPCDTAx0, or RPCDTCx0 and HxxCDTC0, or RPRDTAx0 ) or the program for creating the data medium (programs RFFO*) perform posting in the FI general ledger. Therefore, if the system in HR generates the payment mediums for payments to employees, you must also perform manual postings in parallel. These manual postings are usually performed with the payment summary. In most cases, there is only one posting containing only a few posting items, that is, one posting item for each bank clearing account and each company code involved.
    If, however, the liabilities are distributed according to expenses, more posting items are generated. You can no longer perform posting manually.
    Selection
    With the report H99_POST_PAYMENT, all payments are evaluated regardless of whether they have been paid or not. All wage types included in table BT and table T52POST_PAYMENT count as payments.
    RPCIPE00
    This program is used to post the payroll results to accounting/FI.
    All wagetypes which are configured to the respective GL accounts using the symbolic account are simulated and the documents so generated using this reported are then executed thru PCP0 to have the values posted to the General Ledger.
    Thanks and Kind Regards
    Ramana

  • Hello, how can I transfer music from my iPhone to my iTunes library. New computer and old one not abailable. Purchased items already done. Need to transfer 1200  songs. Thanks guys really need help 

    Hello
    oold computer no longer available. I have 1200+ songs on iPhone that need transferring to my iTunes library. Can anyone show me how to do this please?
    Thank you!

    You're welcome
    ps I have used both in the past
    best to keep a backup of the iTunes folder from PC

  • Difference between older Rmi and latest one ?

    can any 1 tell me about this, i was told latest one is easy to use can any 1 give me a tutorial or any information about it ?

    What do you mean by "older"?
    Read the RMI tutorial
    http://java.sun.com/docs/books/tutorial/rmi/
    http://java.sun.com/developer/onlineTraining/rmi/RMI.html

  • Difference between new GL & Classic GL

    Hi
    I request everyone to help me understand the difference between new GL and Classic GL.
    Basically a new GL has following features:-
    1. Segmental Reporting
    2. Parallel Currencies
    3. Generation of Balance Sheets @ Profit Center Level
    4. Legal Consolidation
    I believe all the above features can also be achieved in Classic GL.
    Also what is the difference between Business Area & Segments?
    Pls help.
    Thanks,
    Srikanth

    Hi Srikanth,
    One of the the core differnences between New GL and Glassic Gl is online integration of  items like PCA,segments,Business area etc with GL.
    In classic GL we need to do a lot of periodic closing activities to get restricted Balance sheet at these levels.
    with online document split enabled in New gl these periodic activities are gone.
    Differnce between business areas and segments:
    both can be used to draw financial statements at other than co.code level. But for segmental reporting you need to have PCA as segments can be derived only thru Profit center. (BADI available in other cases)whereas Business areas are cross co.code settings so you can assign them to sales area/plant/divsion combination for derivation which remains the same as classic gl.
    Hope this helps.
    Pls assign points if it does.
    Thanks,
    vamsi
    Edited by: Vamsi on Jan 21, 2008 7:06 AM

Maybe you are looking for

  • Error in creation of database (planning 9.3.1) base- SQL2005

    This error appears when you create database (planning 9.3.1) base- SQL2005. com.hyperion.planning.olap.EssbaseException (1019060) I would be grateful, if you give me advices how to solve it. Thank you

  • Standard Report for GR done for Purchase requisition

    Hi all, Is there any standard report from which i can get Goods receipt done for Purchase requsition. I can get the details from ME80FN Through dynamic selection. Anybody is having any other solution apart from this..... Regards shailesh

  • How do I export layers as individual files?

    I have an animation with 24 bit colors and alpha transparency. Each frame is a layer in my project and I wish to export each individual layer as a PNG so I can create an animation in a different tool. Is there a way to do this?

  • Forgot my password for AE, is there a way to reset it?

    Trying to upgrade my Airport Express but can't remember the pw. What do I do?

  • Applications crash

    Osx 10.9 several apps crash upon start up, I have been having this problem for several OS's now and not getting better. First was DVD app, I just used VLC to view DVD's. I have been havin gtrouble now with App store games and steam games.  I did a cl