Can't see/edit Editable Regions in Design view

I am unable to see or edit Editable Regions in Design view in
this template, or any pages created from it. Regions can be updated
& saved in Code view only. Recently upgraded to CS3 from DW8/OS
X 10.4.10. Have looked at other postings on this subject, but my
code does not contain the overflow reference. The header is an
include. Editable regions are body, sidebar, body2 and sidebar2.
The library item at the bottom of the page also does not show up in
the Design view. Please see attached code and advise.
Many thanks!!!

Hi,
Yes I've had the disappearing animation problem. It shows in preview but not in design,
I deleted and re-inserted it. That cured it - but for how long.
This latest update has been a disaster for me.
Regards
David

Similar Messages

  • Cannot See Content in Editable Region in Design View

    A have a couple of pages with content in an editable region of a template.  I needed to apply another template to some of the pages things were going along fine.  Then I came across a page, went to modify > templates > apply template to page and then selected my new template.  I now cannot see my content in the design view.  I can see the code for my content in the code view. I can see the content when I publish the page and view it in my browser.  I can even see the content when I open the page to edit in Contribute.
    Why in the world can I not see my content in design view?  I've tried a few other pages and they are now having this problem as well.  I like to work in split screen view and it makes it kind of difficult if I can't see the design view.

    Found it!  Started looking at the code to provide it and noticed an extraneous </tr> and </td>.  Removed and it was fixed!  Simple!  Guess I should have looked a little harder before running to the forum!
    Thanks for the assist!

  • I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program

    I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program ask (do you want to save changes) I look at the image I don't see any changes to save. Please help Thanks for time in advance

    Please describe the steps involved in the issue exactly (with screenshots maybe).
    What have you done for trouble-shooting so far?
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • I have used Lr many years without problems. Now it is inpossible to edit . Can not see the editing in main window only in the small thumbnail. Suddenly it is not possible to import  raw-files from my Linux camera ( it worked earlier)

    Editing mode does not work. I can not follow de editing in the main window. I cah see it in the thumbnail.

    From your description of the problem, I suspect that you have a standalone license but have downloaded and installed the CC update. Or, it's the other way around. In either case, you need to install the right version.

  • Can't edit text in CS3 design view

    Hi,
    I have a big absolutely positioned DIV tag in most of my
    pages, practically the whole page content is inside it.
    In DW CS3 design view very often (maybe 50% of all times) if
    I click inside it to edit the text, DW selects the entire DIV tag.
    The cursor becomes like a cross with arrows, the DIV border becomes
    outlined with a thick blue line, and I can't edit the text no
    matter how much times I click. If I move the mouse with left button
    pressed, this moves the DIV and changes the .css file where the
    position is defined. DIV can't be de-selected with Escape, left or
    right clicking.
    The only way to get out of this is to click somewhere in the
    code view, then go back to design view where hopefully text can be
    edited. Sometimes I have to repeat this twice or even 3 times ,
    it's extremely annoying and time consuming.
    Is there any workaround?
    Like to disable selection of containers in design view, or at
    least a quick way to deselect the current selection?
    This problem does not appear in DW8 when editing the same
    files.
    thanks

    > I have a big absolutely positioned DIV tag in most of my
    pages,
    > practically
    > the whole page content is inside it.
    Nasty. Why?
    Do you have an overflow style on this div?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "harpo_" <[email protected]> wrote in
    message
    news:f0igi1$3dn$[email protected]..
    > Hi,
    >
    > I have a big absolutely positioned DIV tag in most of my
    pages,
    > practically
    > the whole page content is inside it.
    > In DW CS3 design view very often (maybe 50% of all
    times) if I click
    > inside it
    > to edit the text, DW selects the entire DIV tag. The
    cursor becomes like a
    > cross with arrows, the DIV border becomes outlined with
    a thick blue line,
    > and
    > I can't edit the text no matter how much times I click.
    If I move the
    > mouse
    > with left button pressed, this moves the DIV and changes
    the .css file
    > where
    > the position is defined. DIV can't be de-selected with
    Escape, left or
    > right
    > clicking.
    > The only way to get out of this is to click somewhere in
    the code view,
    > then
    > go back to design view where hopefully text can be
    edited. Sometimes I
    > have to
    > repeat this twice or even 3 times , it's extremely
    annoying and time
    > consuming.
    >
    > Is there any workaround?
    > Like to disable selection of containers in design view,
    or at least a
    > quick
    > way to deselect the current selection?
    >
    > This problem does not appear in DW8 when editing the
    same files.
    >
    > thanks
    >
    >

  • Can't see live edits

    I can't see what my edits are doing to the develop module , its shows the filmstrip picture getting edited buts its a 3/4 inch square. The develop module picture show nothing until i switch to a different pic in the filmstrip section and go back to see what i did. can anyone help me i've put this on here before and have yet to get any ideas and can't find any numbers for adobe.

    What version of LR? What computer are you on, with which operating system?
    Hal

  • Can I see and edit the adress book phone tags?

    Hi.
    Does anyone know if it's possible to see and edit the list of standart and costume phone tags on the Lion Adress Book?
    And can you sync it with iCloud with an iPhone?
    Thank you for the help.

    Have you tried using iMovie?

  • Page Content Won't Display in Contribute (Edit Mode) or Dreamweaver (Design View)

    I have pages on my site that have  decided they don't want to display content either in Contribute (in edit
    mode) or in DreamWeaver (in design view). They always look fine in Live view, prior to hitting the 'edit' button or when viewing in a browser. Using CS4 on Windows XP. I use Contribute for small edits and this renders that tool useless as there is no WYSIWYG. It's a pain in Dreamweaver to have to keep previewing in browser when I'm used to working in code/design view. Any help most appreciated. Here's the page I'm currently having the problem with:
    http://www.pacaero.com/products/interconnect-medical.htm

    That's odd because here's what I see ...

  • Adobe muse - can't see my Edge animation in design tab!?

    I have a problem, when i have made mit edge animation, and placed it in muse, i can't see it in the design tab, but when i click the preview tab i shows, and i can also see the animation in browser!? Anyone who can help? :/

    Hi,
    Yes I've had the disappearing animation problem. It shows in preview but not in design,
    I deleted and re-inserted it. That cured it - but for how long.
    This latest update has been a disaster for me.
    Regards
    David

  • Can't see entire audo region?

    Hi,
    I have made a recording in GB09, and I have 'hidden' or decreased part of it with the audio region length cursos that appears when you place the mouse over the bottom right or bottom left of a region
    However, I now want to do the reverse, to see the entire region, but it won't let me! It seems as after you decrease a region's size, it leaves it like that and you have to stick with the smaller region
    Why is this? It doesnt make sense
    J

    Yoo know how after you record something in GB you get a solid section for the recording, which shows the peakes in input, etc.
    If you place your cursor on the top right corner of this section, you can "loop" it towards the right..
    Similarly, if you place your cursor just to the right or the left of this section, you can "trim" the section, in order to eliminate unwanted recording parts or blank parts.
    What I am saying is that after doing this, it wont let me "undo" this, i.e. it wont let me do the reverse operation, grab the section by the left or right and increase the size to see previously "hidden" recordings.
    J

  • Why can't I see my text in CS5 design view?

    Since upgrading to CS5, I cannot see any text but plain text as I work in design view.  If I apply a css format to it, it disappears from view, but not from the code and shows up on the browser.  But if I can't see it, and can't select it, I can't lay it out at all.
    I have uploaded 2 different  screen grabs of a simple page with the split view so that you can also  see the code. -one is the regular design layout and then the split  in  Live View so that you can see what I mean. The text in in the code, is visible in Live View, but cannot be seen or selected in Design View. I have a MacBook running Snow Leopard.
    http://channelsusan.com/disappearingtext.html
    I posted this problem months ago and no one could figure it out. I have been using my old computer with CS in the meantime.  Now I have time to address the issue and want to try again. So far I have  reformatted my drive, reinstalled the operating system, unistalled and reinstalled CS5.
    Please help me.

    ednerid wrote:
    Since upgrading to CS5, I cannot see any text but plain text as I work in design view.  If I apply a css format to it, it disappears from view, but not from the code and shows up on the browser.  But if I can't see it, and can't select it, I can't lay it out at all.
    I have uploaded 2 different  screen grabs of a simple page with the split view so that you can also  see the code. -one is the regular design layout and then the split  in  Live View so that you can see what I mean. The text in in the code, is visible in Live View, but cannot be seen or selected in Design View. I have a MacBook running Snow Leopard.
    http://channelsusan.com/disappearingtext.html
    I posted this problem months ago and no one could figure it out. I have been using my old computer with CS in the meantime.  Now I have time to address the issue and want to try again. So far I have  reformatted my drive, reinstalled the operating system, unistalled and reinstalled CS5.
    Please help me.
    Is it only the <h> (heading) tags that you can't see in design view? From the screen shot it looks like you can view the <p> (paragraph) tag, right?

  • Can't see preview of .oam in design mode?

    I can't see preview of my .oam in design mode. I  can see it fine in preview mode, but I just see a blank box in design mode. I play, but I would at least expect a preview of it. In the tutorial I believe I saw that, so maybe there is something I'm not doing or am experiencing a bug?
    Here is a screenshot of design mode
    A screenshot of preview mode

    Quit the mail app, launch the app again and then look to see if the messages appear, if not - quit the mail app and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
    Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't work, reset your iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why can't I see my site normally in Design view?

    I made a lot of changes to my hobby site when I converted to CSS and also changed the layout. The problem is this, now that it looks good in the Web browsers where I've tested it, it's gone crazy in the Dreamweaver Design view. Sepcifically, the text for the article shows up as a narrow column about 150 pixels wide on the far right side. Any suggestions? Here's a link to the site on the Web ...
    http://www.keithpurtell.com/kthings/

    #article {
    float: right;
    margin-right: 60px;
    width: 570px;  /*530*/
    max-width: 85%;
    /*max-width: 560px;*/
    Disabling max-width in DW gave me an approximately correct result in DW Design View.
    I didn't see any unexpected change in the browsers without that attribute either.
    Don't know if that helps - just an observation.

  • JDeveloper 10.1.3.2.0 - How to see content of showDetailItem in Design View

    Hello,
    I am new to use the JDeveloper to create JSF Applications and I learn with the tutorials.
    So I have a question:
    I want to find out: How to see the content of the second or third showOneTab component in the WYSIWYG Design View of a page.jspx?
    For example, I am orientating the tutorial: "Introduction to ADF Faces/Trinidad Using JDeveloper" (http://www.oracle.com/technology/obe/obe1013jdev/10131/trinidad/adf_faces_trinidad.htm)
    Page: table.jspx
    There is the showOneTab "Single Row Select" and "Multi Row Select" and I see only the content of "Single Row Select".
    How can I see the content the table2 of "Multi Row Select".
    I have created the table of "Single Row Select" and can see only this one.
    The download of that example show me in the View of structur the component table2, but not in DesignView.
    Can you help me?
    best regards
    Joachim

    Hello Frank,
    many thanks for your answer. It try it and it works!
    For completion, I think the argument "disclosed" of the component "af:ShowDetailItem" with "default" setting is "false".
    So if I will editing one tab in WYSIWYG editor, I set only this tab disclosed = true.
    All others to "false". When my edit is completed, I set only the first tab to "true" and all other "false", because I want to start with the first tab by first request.
    I look again into the "help". Hopefull in answer:
    Which effect has this argument by deployment?
    There is only the desciption: "whether or not to disclose the children This attribute is not supported on the following agent types: pda, phone, voice."
    I think this is for me irrelevant. My application have to support only a client like a personal computer.
    Which effect has this argument by deployment?
    Or is this only for the WYSIWYG editor?
    Joachim

  • See the box model in Design View

    This is probably a simple question but I can't seem to figure this out or find out about it in the help.sometines when I'm working on a page element the margnins and padding are shown in the design view window. most often they are not visable. How can I choose to show the margin and paddign of elements in the Design view? I have the View>visua laids>box model selected. It only shows up seemingly randomly.
    I suspect there is a keyboard combination or something I need to invoke so I can have control over shwoing the margin and padding when I want to see it.
    thanks for any help.

    markf12 wrote:
    This is probably a simple question but I can't seem to figure this out or find out about it in the help.sometines when I'm working on a page element the margnins and padding are shown in the design view window. most often they are not visable. How can I choose to show the margin and paddign of elements in the Design view? I have the View>visua laids>box model selected. It only shows up seemingly randomly.
    I suspect there is a keyboard combination or something I need to invoke so I can have control over shwoing the margin and padding when I want to see it.
    thanks for any help.
    Should show up if you click the border of a container. Then if you want to see that actual measurements hover over the border again.

Maybe you are looking for