Can't see External HD through Airport Extreme Base Station

I have upgraded to the Apple Airport Extreme Firmware 7.1. Previously I was unable to see my 2 External HDs that are connected to the base station via a powered USB hub. Both of the HDs are FAT32s. I had hoped the firmware update would resolve the problem. But I am still not seeing the HDs. I connect to the base station wireless through a MacBook.
Any clues/help would be appreciated. I've scanned through several posts and seen people with similar problems and others that can see their HDs but not some files.

I suggest using the following instructions to re-check your AirPort Extreme Card/Antenna cable installation in your G4 iMac just to be sure nothing was missed: iMac (17-inch 1GHz) and iMac (USB 2.0): Customer-Installable Parts Instructions
Also, check that the antenna cable is firmly attached per this Apple Article: http://docs.info.apple.com/article.html?artnum=108039
I have the base station connected to a pc so I can't download iStumbler.
For the PC, you can use NetStumbler instead.
I'm not sure how to check if a signal is being sent through Airport utility.
Instead of the AirPort Utility, you can use the Internet Connection utility to verify signal strength of your base station. To access this utility, just right-click the AirPort status icon in the menu bar, and then, select it from the drop-down menu.

Similar Messages

Can't connect to a VPN through Airport Extreme Base Station

I'm unable to connect through my Airport Extreme Base Station to my office via VPN. Is there something needed to be set up specially?
I'm using a notebook with WindowXP which connects to internet just fine.

Here is info:
Airport Utility finds an Airport Extreme with 802.11n(fast ethernet)
Base Station Name: Home
IP Address: 10.0.1.1
Airport ID: 00:19:E3:FA:A8:32
This is not the IP address of the modem. Even though light is green on Base station the ATV doesn't make the wireless connection.

I need help with connecting an external HD to Airport Extreme base station

So i have the base station set up, and it recognizes my hard drive in the airport utilities and have the file sharing turned on, but when i connect to the base station wirelessly from my macbook pro, the hard drive and base station does not show up in the shared section in my finder. Any ideas as to whats up?

I'm having a similar problem, and I hope you'll excuse my ignorance but is there a difference between rebooting and just restarting. I've done the latter (numerous times) but not the former.
I have set up my Airport Extreme Base Station to my wireless router (DSL Internet connection) and to an external hard drive (MyBook Essential 640GB with USB connection). Internet works fine.
When I plug the hard drive directly into my MacBook it recognizes it fine, I can copy files to it, add folders, explore them etc.
When I plug the hard drive into the Base station, it appears as a network drive on the side bar of my finder window, but when I click on it to open it, it is empty, it shows 0 items and the available memory, but none of the files I put on it are visible to explore.

Cannot access certain web sites through Airport Extreme Base Station

I use the old (round) Airport Extreme Base Station (AEBS). Approximately three weeks ago I could no longer connect to americanexpress.com or to Godaddy or their mail servers. About a week ago the Godaddy sites started working again, but the American Express sites are still not working.
My current setup:
- AEBS connected to Time Warner New York cable modem
- Three Airport Express units - two connected to speakers, and one set up with WDS to provide Ethernet access to computer (PowerMac G5), which is in a separate room from cable modem
- I also have an Airport card in my G5 to connect directly to the wireless network (but that doesn't solve any of my problems)
I have tried resetting all the units, and have also tried running the network with all the Airport Express units turned off, none of which as allowed me to access American Express.
I have the exact same problems with my work-issued Windows 2000 laptop when logged in to the wireless network.
When I plug a computer directly in to the cable modem, I have no problem accessing any of the sites, which leads me to believe that the solution somehow lies with the AEBS - I just can't figure out what it is.
Any help/suggestions are much appreciated.
PowerMac G5, 23" Cinema Display, Airport Extreme Base Station (802.11b/g) Mac OS X (10.4.9)

If you're having trouble with throughput performance or just connecting to some websites, try changing the MTU value, on your Mac, to 1492. (The default value is 1500.) To do so, you can use a utility, like Cocktail or via OS X's Terminal.
MTU will vary with connection type. Cable and non-PPPoE, can use up to 1500, whereas PPPoE connections (WinPoet, RASPPPOE, Enternet, etc.) can only use up to 1492. For secure VPN connections (i.e., IPSec) use a MTU value less than 1500.
The best value for MTU is that value just before the packets get fragmented. To test, use the Ping utility.
OS X: ping -D -s 1472 www.dslreports.com
WinXP: ping -f -l 1472 www.dslreports.com
Reduce 1472 by 10 until you no longer get the “packet needs to be fragmented” error message. Then increase by 1 until you are 1 less from getting the same error message. Add 28 more to this (since your ping packet size, not including IP/ICMP header is 28 bytes). This will be your MaxMTU. (Note: If you can ping thru at 1472, stop, you’re done! Add 28 and your MaxMTU is 1500.)

Setting up USB External Drive to Airport Extreme Base Station

I've attached an External Hard Drive to my AEBS. My base computer is connected to the AEBS via Ethernet Cable and can see the external drive under Networked Drive however it shows up twice as Drive Y and Drive Z both showing the exact same capacity.
My desktop computer is running windows vista, and my laptop is also running vista. My Laptop connects to the AEBS wirelessly. The laptop does not see this External Hard Drive. How do I get my laptop to recognize this drive? Shoule my external hard drive display with two different drive letters, or should it only appear as one? I've not had much luck using this feature of the airport extreme and was the basic reason i purchased the AEBS

The USB port on the AirPort Extreme will support drive formats of Mac OS Extended (Journaled) and FAT32. NTFS is not supported, so that might explain some of your difficulties.
What feature did I invoke that automatically established a "third" drive? Where is it established on the physically formatted Mac drive? Does the format of Appleshare just indicate how the partition is accessed?
Not sure about this. When I format a drive as Mac OS or FAT 32, I see a single drive when accessed from the Finder.

Can no longer configure modem in Airport Extreme Base Station

We've been using our AEBS to connect to our ISP via its internal modem for several years. Recently, I needed to update some ISP information for the modem connection and did so successfully using Airport Admin Utility. Two days later, tried to change additional settings, but AAU no longer shows "Modem (v.90)" as a "connect using" option on the Internet page. In fact, all of the options are greyed out except Ethernet, PPP over Ethernet and Airport (WDS). What happened?
I've reloaded and updated all of the Airport utilities, updated the AEBS firmware, power-cycled the AEBS . . . everything, but nothing fixed the problem.
I've tried this from two systems running 10.3.9 and one running 10.4.7.
I'm desperate. We live in the mountains of Colorado and until recently our only option for Internet access has been modem. Next week, however, we'll be installing a dish for access via an antenna on a nearby mountain. I'm concerned that I won't be able to reconfigure the AEBS for broadband. It's also possible that we'll still need to use the modem to connect to work, so I'd like to be able to switch AEBS configurations at will.
I'll be most grateful for any suggestions offered.
iMac G5 Mac OS X (10.3.9) also iMac G5 running 10.4.7 and a couple of laptops

Not yet. Maybe I'll try that next. The problem is that the 1-second reset only changes the password, but the 5-second really hard reset will wipe out all the settings and return the AEBS to default settings. If I still can't get to the modem configuration in AAU, then I've just lost all ability to connect to the Internet. (The modem in my computer got fried during a really, really bad lightning storm - zapper came in through the phone line even though it was connected through a surge suppressor - such is life on the Frontier!)
The modem in the AEBS is working because that's how I was connected to the Internet last night when I wrote the question, but I just can't configure it anymore.
I'll can give the hard reset a whack, but it makes me anxious. I may do better to just wait until my broadband link is installed and then configure the base station for Ethernet. At least that option seems to still be available.
Thanks for the response.

Airport extreme base station no longer recognizes password

Away from house for a week. Came back and none of our iPhones, iPads can connect to wifi network. Airport Extreme base station will no recognize my network password to check settings. Airport Epress will not join network either.

Hi danny_A1A!
I have a couple of articles here that should be able to help you troubleshoot this issue. The first is a quick assist article pertaining to Wi-Fi issues and can be found here:
Wi-Fi Quick Assist
http://support.apple.com/kb/ht1145
We also have another article on troubleshooting Wi-Fi connectivity, and it can be found here:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Take care, and thanks for visiting the Apple Support Communities.
-Braden

When was my airport extreme base station built

Can you tell me when my AirPort Extreme Base Station was built? Its serial number is 6F706F6SVZC. I figure this will help me determine a number of tech items about this model, including what generation it is. Thanks!

It is an express not extreme.. at least according to this.
Serial Number: 6F706F6SVZC
Model:
- AirPort Express (802.11n)
Codename:
- No codename assigned.
Build Country:
- This unit was built in China.
Build Year:
- This unit was built in 2007.
Build Week
- Your device was built in week 6 of that year (February).
Production Nr.:
- This unit was number 1250 to be built that week.

Can't read iPhoto library from external drive via airport extreme base stat

I can't seem to open my iPhoto library from my external USB drive that is hooked and being shared through my airport extreme base station. If I plug the external drive directly to my mac via USB it works but not when going through the base station.
This only started happening when I upgraded from iLife'06 to iLife'08.
Anyone have any ideas on how to fix?

That's a problem that many are posting about. Haven't read of a solution yet. Be sure to report the problem to Apple at: http://www.apple.com/feedback/iphoto.html.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Mac Book pro can't connect to Internet through Apple airport extreme base station

I had problems connecting to the internet in the past with my macbook pro. One day it suddenly started working again but then I bought a second apple TV I lost connectivity. I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet. When I hooked up the new Apple TV that I bought it booted my computer from it's ip address. The apple TV though wouldn't work and now nor would my computer. I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not. Even if I plug in the ethernet cable from the base station it doesn't work. It show that it has a self assigned IP address. After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet. If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine). When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router. I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet. Can you please help me trouble shoot this?
I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

It has something to do with the connection from the base station to my computer
I don't think so..
I just posted a reply which totally vanished.. strange strange website now.
Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
Please tell us what modem you use.. is it a router??
If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
You need to also give us the screenshot of the IP you are getting in a computer that works.
EDIT
Sorry this is half double post.. the previous page refused to display.. now it has returned..

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

PS3 can't see new Airport Extreme base station

I replaced my old airport extreme with the latest one, but now my PS3, which is on another floor, cannot see the base station, and the new base station has a lot less range than the old one. With my old one I could sit out in the back yard with my laptop, and the PS3 picked it up right away over our wireless network, but now, nothing. My laptop connects okay, just can't go very far. Nothing has changed except the base station itself. Please help.

Hello Uri. Welcome to the Apple Discussions!
A few things I would suggest that you try to see if either or both help with the PS3's connectivity to the 802.11n AirPort Extreme Base Station (AEBSn):
o If currently enabled, disable the Guest Network.
o Use a separate Network Name for the 5 GHz radio. Make sure that the PS3 connects to the 2.4 GHz radio's wireless network.

Why can't I print remotely through Airport Extreme or Airport Express?

I am currently on a WEP-protected network and can no longer print remotely. (The Airport Express worked fine on my last network which wasn't WEP protected). I can't even get the Airport Utility to find either my Airport Extreme base station or my Airport Express. I cannot remove the WEP protection from the network. I have tried plugging the printer into the Airport base station directly and still no printing. Why does the problem seem to be connected to WEP protection and what can I do about it?

The WEP key has to entered onto the Airport Express through the Admin Utility. Find the key on your router, and then copy and paste the key into Express. If that doesn't work, try putting a $ in front of the WEP key on the Express.

I have an Apple AirPort Extreme Base Station (Simultanious Dual_Band) (MC340LL/A), and updated the software. After updating no devices can connect via wifi. Any suggestions.

I have an Appl,e AirPort Extreme Base Station (Simultaneous Dual_Band( MC340LL/A. After updating the software, no devices can connect via wifi.

As suggested in another discussion area, (AirPort), I reset the AEBS to factory defaults. On the TV, I went to >Settings>General>Network>Configure Wireless>Wireless Networks. I could then see the generic "Apple Network xxxxx" on the TV. From my MacBookPro, I verified that I could connect to the TV by launching iTunes and noting that the TV was now visible in the "Devices" menu. Went back to the AEBS and ran through the "Setup" routine. I did NOT use the "Previous Settings" but instead, saved the old settings profile, created a new wireless network and new settings profile and enabled WPA2 Personal encryption. I then went back to the TV and went through the "Settings" routine again (as noted above). This time, after entering my WPA2 password, the TV connected to the network and problem was solved. Thanks.

Can't see External HD through Airport Extreme Base Station

Similar Messages

Maybe you are looking for