Can't see file system tree in Workgroup Manager to add share point

Server 10.4.11: open Workgroup Manager and select the Sharing panel.
Clicking the "Share Points" tab displays my current share points as expected.
But clicking the "All" tab shows a +completely blank window+: no volumes or folders at all!
(The button at the bottom to mount or unmount a remote NFS volume appears, but I've never used it and I don't know what good it might be.)
Accessing the server with the 10.5 version of Workgroup Manger from a Leopard client gives the same behavior.
(Cross-posted in Server Admin Apps area)

In the immortal words of Emily Litella, "Never mind". I rebooted the server and it's back to normal. Go figure.

Similar Messages

Can't see files that are backedup

I have a G4 iMac that has both an internal (small) and external (large) drive that I use for data. I am using a time capsule to backup the whole system.
When I run Time Machine it appears to backup both disks, the log file shows both drives having many GBs of data being transferred without any errors.
However, when I go into the TM application, I can only see files that are on the internal drive. I can only see my external 'LaCie HFS' in the Now view, going back in time that drive is greyed out.
If I use the finder when the TC is mounted, I can traverse into 'Backup.backupdb/iMac/2009-08-074700' and I can see the 'LaCie HFS' folder and in it are all my backed up files.
I have looked through the FAQ and various postings but cannot find an answer.
The closest thing that I can see as being a potential problem is that my old internal drive uses an Apple Partition Map while my new external drive uses a GUID Partition Table.
Why would backupd created backups that Time Machine cannot see?

Hi, and welcome to the forums.
Try this: Open a Finder window and press ShiftCmdC (or select your computer name in the Finder Sidebar).
Then +Enter Time Machine.+
On the first Finder window in the "cascade," labelled Now, you'll see all the volumes currently attached to your Mac.
Select the Finder window for any backup, and you'll see a folder for each drive/volume that was backed-up, including any that are no longer connected. Navigate from there to whatever you're looking for.

How can I see file with chinese name in Sunray USB storage?

hi, All
I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
best regards
xiong wei

You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.

GB e-filing - can't see business systems

We are trying to implement GB e-filing using XI.
Our 4.6C R/3 system is shortly to be upgraded to ECC 6.0 so we are moving from Business Connector to XI.
The XI system is installed and appears to be running OK. It is the latest version with the latest patches.
We have a central SLD on our Solution Manager System (v 4.0)
The XI machine and our QA (upgraded to ECC 6) are in a landscape in the SLD.
We have got a good way through the e-filing document at
http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
but have got stuck at Stage 6 [A] 3. 2. which says
2. On the Tab Business System Services for A2A, use the F4 help and select the business system on which the SAP HR component 6.00 resides in your system landscape
We can't see any systems.
Any idea what needs to be done to see our ERP system?

Hello Prakhar
Thanks for advice, really useful!
Can you please clarify where exactly I can create the Busines Transactions, such as Norman Correction?
I would like to create Normal Correction via SOLMAN_WORCENTER,so I navigated to Change Management > Common Tasks > New Request for Change (for instance)
After that I'm getting the list of various roles, such as:
Select a business role: AIC_MANAGER-AIC Manager
IC_AIC_AGENT-Accounting IC Agent
AUT-PM-Automotive Partner Manager
CASEWORKER-Case Worker (Social Services)
.....etc..
and I don't know which one to use.
Can I still use "old-fashioned" CRM transactions for this?
It all has been changed dramatically if you compare it with 7.0
Thanks,
123
Edited by: SOLMAN123 on Nov 23, 2011 7:11 PM

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

Hello,
If you don't have an entry like "SQL Server Reporting Services (InstanceName)" in Windows Service Manager (Services.msc) then because SSRS service not installed on that machine. Install it, then you will see such an entry.
Olaf Helper
This is not an SQL issue it's a SC Service Manager issue. Reporting Services is installed and running on the SQL side. The problem is that as I am now aware I cannot get the Data Warehouse Server to register in the Service Manager consoles to connect that
with the canned reports and turn on Reporting Workspace. Any thoughts?
[ Blog] [ Xing] [ MVP]

I can't see system users in Workgroup Manager

How do I get the user accounts that are already on Mac OS X Server to show up as users in Workgroup Manager? Re-adding the user from "Add User" creates a conflict, so I know the account is being seen by Workgroup Manager. Thanks for the help.

Hi
Yes. Firstly de-select the option to show System Users and Groups. Use the Filter to only show you Users with UIDs above a certain number. If you've used the default numbering system start with IDs over 1000. This gets around you inadvertently exporting and/or deleting the default Administrator account.
Select the users you're interested in the Local node. Go the Server Menu and select Export. Save the exported file to the Desktop and give it a meaningful name. Now delete those exported users from the local node. You can't have the same users in both directory nodes. Select the LDAP node and select Import from the Server Menu. The rest should be fairly obvious.
A couple of things to look out for. When importing those Users they should automatically be assigned Open Directory for their User Password Types in the Advanced Tab. Change them to suit if they come in as Crypt. Passwords don't carry over so you will have to either assign these again or force users to change them at next log on. Assuming these are users with networked home profiles?
Tony

Can't see my System Restore Files

My proble is double sided, I backed-up my files to a New SImpleSave External HP Drive, which saved them as .wim files,I NEED to convert them back to their original state. I just restored those files to a FOLDER on My DESKSTOP (sytem recovery files) which shows 72 g worth of files, But when I go to the folders they appear as EMPTY and I can find my files///what do I do? thank you

daman77 wrote: My proble is double sided, I backed-up my files to a New SImpleSave External HP Drive, which saved them as .wim files,I NEED to convert them back to their original state. I just restored those files to a FOLDER on My DESKSTOP (sytem recovery files) which shows 72 g worth of files, But when I go to the folders they appear as EMPTY and I can find my files///what do I do? thank you
Hello daman77, You might try taking a look at this Link for some information on how to manage .wim files.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

My Mac Can't See Files on External Hard Drive

Hi,
I'm having some trouble with my iMac today. It can't see any files on my NTFS External Hard Drive after a sharing change, I'm using Paragon NTFS for Mac OSX v8.0.0.
Yesterday evening I tried to share the drive over my network by clicking System Preferences / Sharing / File Sharing and then adding the drive as a shared folder. It is since doing this that I cannot see my files on this external HD. I have a second NTFS HD here which I connected and I can see the files on that drive so I don't think it's a software issue.
I have tried a few things to try and fix it but to no avail.
1. I have tried removing it from the shared folder list but that hasn't solved the problem. I tried adding it a second time just in case but that didn't do anything either.
2. I have repaired the disk permissions via disk utility
3. I have tried "defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder" to show hidden files but they still don't appear. I have reversed this so hidden files are no longer visible.
If I connect the drive to my Windows 7 laptop I can see and access all of the files.
I hope someone can help out with this issue. If you need any other information just let me know.
Kind regards,
Kim
System Details
iMac 24" Early 2008 Model
Core 2 Duo - 3.06Ghz
4GB RAM
OSX 10.7.2
iomega 1TB External Hard Drive
Formatted NTFS
Paragon NTFS for Mac OSX v8.0.0

I had the same problem but only after I upgraded to Lion. I could see the files on my external drive on other Macs using older software. It seems that Lion wasn't seeing old files on the external drive. So we accessed the files on a Mac using Snow Leopard, copied all the files into one new folder on the same external hard drive and now they're there on Lion. Problem solved! I hope this helps

Can't see files in document / downloads folder on dmg disk image

So my last update OSX 10.6.8 crapped out and i couldnt boot the system anymore... So i decided to install a new system, before i did that i backed up my whole HDD with disk utility into a compressed DMG file. I went ahead and installed OSX 10.7 new mounted the DMG file, problem is i can't see any files in my document or in my downloads folder anyone has a solution for this or know what causes this problem. Please let me know.

A warm welcome to the forums Sue!
The Finder is a bit lackadaisical about updating itself, you can click back & forth enough times, closing folders, opening folders and eventually it'll be in touch, or you can try something like "A Better Finder Attributes", for it's "force the Finder to update stale information about your files" feature.
http://www.versiontracker.com/dyn/moreinfo/macosx/18736
Possibly this would help too, but haven't tried it...
http://www.finderpop.com/

Mac OS 10 can't see files on HD coming from OS 9 and vice versa?

Hello, all! Got a TiBook 1Ghz with a 255 GB HD which I've partitioned in half, one for Tiger/OS 9 and one for Leopard. Problem: Any file placed on Vol 2 in OSX is invisible in OS 9 and vice versa, so one writes over the other. Vol 1 works fine. Tried reformatting, disk repair, DiskWarrior 9 and 10, re-installing all the operating systems. Suggestions? Thanks!

Hi, kennethfromtoronto & BGreg! I do know that OS 9 is not supported by Leopard, however I'm not talking about running 9 in Classic. This TiBook will run 9 by itself, but when I run OS 9 it is from Volume 1 which also has Tiger installed. I can boot from Tiger or from OS 9 from Volume 1 and they both run just fine.
The problem is that when do I boot from OS 9, it can't see the files on Volume 2 that were placed there under OS X Tiger. Conversely, when I run Tiger, the files I put on Vol 2 while running OS 9 are not visible. It's like I'm running a parallel universe. Unfortunately, this allows one system to overwrite whatever was put on the volume from the other system, and vice versa, with the net effect that I don't dare run OS 9 for fear of overwriting data on Volume 2.
Also when I do run Leopard from the second volume, it also cannot see any files on Volume 2 that were put there under OS 9.
Note that with Volume 1 there is no visibility problem, no matter which of the three systems is running. It happens with the second volume, whether it has an operating system installed on it or not.
Usually I am good at figuring this stuff out, but you see how confusing this is... My thinking is there might be a bug in the Apple formatting software? I used the Disk Utility from my external hard drive which runs Leopard.
Makes a good puzzle to solve, anyway... Thanks for the help!
DQM

Can't see file code

I'm using DW 8.0.2 on this computer (30-day trial of full
version CD I
have). On my home computer I have DW MX 6.1. I am trying to
edit existing
website files from a website that I didn't design. It has
".htm" files,
."html" files, and ".asp" files.
At home (with DW MX 6.1), I can access the website files,
download them, see
the html and edit the code, and upload them to the website.
This works for
all file types (htm, html, asp).
On this computer (with DW 8.0.2), I can access the website
files and
download them. But I can't see the html code for some of them
in order to
edit the code. All I see when I open those files is jibberish
symbols.
This is true for all 3 file types -- in other words, some of
the html files
work, some of the asp files work, and some of the htm files
work. By
"work", I mean I can see the code when I open them.
I just reinstalled DW 8.0.2 and HomeSite, and Extension
something, and
ColdFusion hoping somehow that would fix things. What
happened is that now
I can "see" some of the files whereas before I couldn't see
any.
Any ideas what else I could try?
I'm using Windows XP Pro.

Okay, thanks. I'll have to try that.
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> DW would do that if you used it to validate the page, I
believe.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Newbie56" <[email protected]> wrote in message
> news:[email protected]...
>> Thanks again. I appreciate you taking the time to
explain things. I am
>> the type of person that finds it helpful to
understand the concept and
>> underlying reasoning involved in how things work.
That helps me apply
>> the concepts to other situations.
>>
>> I know this is probably overkill or too much to
expect, but I wonder if
>> it would be possible (and practical) for future
versions of DW to build
>> in error messages when certain syntax errors are
encountered instead of
>> just producing a blank page or producing a page with
all unrecognizable
>> gibberish.
>>
>> For example, if DW encountered a problem with an
unrecognized code in the
>> charset=whatever coding, maybe it could produce an
error message that
>> says "error in reading charset command" or
"unrecognized charset" in line
>> "charset=whatever". So, if someone accidentally
entered UTF-61 (a typo)
>> instead of UTF-16, the unrecognized charset error
message could appear.
>>
>> Or, in the common error you described, maybe DW
could produce an error
>> message that says "error -- multiple or conflicting
<body> tags found,
>> unable to proceed".
>>
>> Or, in general, "unknown error(s) in code detected ,
unable to proceed".
>>
>> I'm sure it can't accommodate every coding error,
but maybe some are
>> common enough that DW could provide a feedback
message for them.
>>
>>
>> "Alan" <[email protected]>
wrote in message
>>
news:C0EC64F9.29AFB2%[email protected]...
>>>
>>>
>>>> Thanks. That makes sense and it helps me
understand what the problem
>>>> was.
>>>
>>> no problem and good luck with things.
>>>
>>> suggestion- you could do a Find and Replace, or
just a Find for
>>> charset=unicode sitewide
>>>
>>> a difficult to understand thing that seems like
a contradiction at
>>> first, is
>>> that with each new version of dreamweaver, as
features and capabilities
>>> are
>>> added; it gets less tolerant of code syntax that
isn't just right.
>>> That's
>>> why folks ask to see the page/code. Dw can't be
as tolerant or failure
>>> resistant as a browser can be- a browser just
has to display something.
>>> Dw
>>> has to know exactly what the code is and where
the cursor is in the tree
>>> of
>>> syntax so it can decide what's proper code to
insert in the current
>>> cursor
>>> location.
>>>
>>> it's probably a weekly occurrence of someone who
says design view is
>>> blank
>>> YET the page renders fine in browsers- when the
page is checked they are
>>> using SSI includes where the included files are
complete html docs with
>>> <head> and <body> tags. Browsers
render the page because the browser
>>> programmers can code it to to deal with
imperfect pages- but dreamweaver
>>> sees multiple body tags and gives up trying to
make sense of it.
>>>
>>
>>
>
>

I can't see file in folder

I can't see my file in the actual folder after saving it. Weirdly, I can see the file if I open from Pages. Please help.
Message was edited by: Azwan

Has your Mac been running slowly lately?
Is your hard drive nearly full?
OSX can get quirky when it doesn't have lots of hard drive space to write things. It wants a minimum of about 10% of capacity.
There also can be problems with refreshing the contents of windows in List view.
When I move files up and down list view not infrequently they disappear and I have to nudge the system to show them.
Not a nice thing at all, particularly since it caused me to trash a folder full of my tax files once because I thought it was empty. Since then I do a lot of double checking.
P.
PS Might be time to clean up your hard drive by running Disk Utility from your installer DVD.

Can't see files on NAS only Folders?

Strange question - I just had to do a data retrieval from a Windows 7 disk from a PC before I reinstalled the operating system. (my daughters form work, It crashed). I used a Hard Drive Docking Station to read the drive and stored them on my NAS (A Windows HP Server)using my iMac. I have a lot of my stuff there, When I copied the Folders I wanted they all showed up on the Server, but when I drilled down to see the files it was blank??? I thought for a minute that whatever had happened to the PC has deleted all the files but just to make sure I started up an older Windows Laptop I had abandoned a coupel years ago and connected to the NAS and in fact all the files within the folders are there. I never had this happen before and can't explain it. Is there any reason why when I view the Folder from a MAC that I can't see the files that were written on a PC but copied to the NAS by the MAC?
I know, dump the PC and get her a MAC. Trust me I've already told her that....

Welcome to Apple Discussions!
Is Spotlight indexing the usb stick? Check the menu in the upper right.
If it is, wait for it to complete.

Can't see files on one computer

This isn't a linksys issue, but likley one with my old computer.
On my new one, connected to a WRT54GC I'm running XP Home, I can see the old computer, but can't access it. On the old one, also running XP home and connected with a wireless linksys USB adapter, I can see the new computer and can access the files I have set to share.
I have run the wizard on the old one several (I mean SEVERAL) times. I still had to manually set up files for sharing, and I see the little hand under the folders I want to share, but I can't see them on the new computer. The old computer has the XP firewall turned off.
I see everything I need from the new on the old computer, can print on the printer connected to the new computer, but can't see the old computer in 'my network places'. The EasyLink adviser sees the old computer.
When I view workgroup computers on the new one, and click on the icon for the old computer, I get a message that I might not have permission, but as far as I can tell, permission is set on the old one.
Is there something I'm missing to give the new computer permission to access the old one?

I'm having this exact issue.
I have WRT54GC as well.
Two old desktop computers (win XP Home) are running on a wired connection, one (new) wireless laptop (win XP Media). All are connected to internet no problem, but none can see each other. I have run the network setup wizard several times on both desktops. It seems successful, but then I cannot view workgroup computers and I cannot print to network printers. "Improper permissions."
What is going on here and how can i fix it?

Installed iCloud Drive and now can't see files on iCloud. Should I fallback from iCloud Drive to iCloud, or upgrade all my devices to Yosemite & iCloud Drive?

After installing Yosemite & "iCloud Drive" on MacBook Air, I cannot see files previously stored on iCloud.
But I can get to files on iCloud using my Macs still with old operating system (OS X 10.8.5).
I copied all files from both iCloud and iCloud Drive to thumb drives until decide what to do.

You cannot revert back to iCloud after enabling iCloud Drive on your MacBook Air. If you want to be able to access your documents on all your Macs you'll have to upgrade the others to Yosemite and enable iCloud Drive on them too.

Can't see file system tree in Workgroup Manager to add share point

Similar Messages

Maybe you are looking for