Can't see files on my Vision:M in Mediasou
In Mediasource (it is fully updated) if I navigate to Vision:M-->Music I can see my album folders, if I click on these folders the majority of them appear empty. I see no tracks. I know this music is on my player since I listen to it all the time.
Anyone know what this is about? I find it really annoying since I would like to update my tags on some of the tracks, but I can't. I updated them all in my PC music library thinking it would carry through, but it doesn't transfer over to the Vision:M. I used to have a Nomad Zen Xtra, and never had this problem. Is it mediasource or the Vision:M?
I relaize I could reformat the Vision:M and resync with all my new tags, but it seems like a whole lot of effort. If I could just see the music trakcs on my Vision:M it would be so much easier.
Click on the chevron (the little triangle) to the left of the iPod icon This will display the various icons for the iPod itself, Music, Movies, TV Shows and Playlists. Click on Music and you'll see the traditional song view.
Similar Messages
-
How can I see file with chinese name in Sunray USB storage?
hi, All
I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
best regards
xiong weiYou might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email. -
Can't see files that are backedup
I have a G4 iMac that has both an internal (small) and external (large) drive that I use for data. I am using a time capsule to backup the whole system.
When I run Time Machine it appears to backup both disks, the log file shows both drives having many GBs of data being transferred without any errors.
However, when I go into the TM application, I can only see files that are on the internal drive. I can only see my external 'LaCie HFS' in the Now view, going back in time that drive is greyed out.
If I use the finder when the TC is mounted, I can traverse into 'Backup.backupdb/iMac/2009-08-074700' and I can see the 'LaCie HFS' folder and in it are all my backed up files.
I have looked through the FAQ and various postings but cannot find an answer.
The closest thing that I can see as being a potential problem is that my old internal drive uses an Apple Partition Map while my new external drive uses a GUID Partition Table.
Why would backupd created backups that Time Machine cannot see?Hi, and welcome to the forums.
Try this: Open a Finder window and press ShiftCmdC (or select your computer name in the Finder Sidebar).
Then +Enter Time Machine.+
On the first Finder window in the "cascade," labelled Now, you'll see all the volumes currently attached to your Mac.
Select the Finder window for any backup, and you'll see a folder for each drive/volume that was backed-up, including any that are no longer connected. Navigate from there to whatever you're looking for. -
Cifs - need to connect to share server (can see folders but can't see files)
This is driving me nuts...
CASE ONE:
before the upgrade, i could view folders and files on the shareserver (at a company). but after the upgrade, things went downhill...
we can no longer use "smb://ServerName" so we are forced to use "cifs://ServerName". Fine, fine. but i can only see folders...not files.
ive looked everywhere on the internets for a solution but find nerdy, tech lingo. I found only one that had the solution, but they simply said "nevermind, i found the solution...".. jesh,,, at least leave a solution for us....
does someone have a work-around or a solution to this bug?
CASE TWO:
Dealing with Outlook 2011 and sharing caledars using the Exchange, i can see my co-workers email and statuses...but i can no longer see their schedules/availability.
does anyone have a solution to this???
Rule #1: do not say "its an Outlook issue" cause they already told me to ask you.
Rule #2: do not say "you are posting in the wrong place". just help, for Pete's sake...
Rule#3: do not say "$**%()*$ and preliminary connection hub 5583HHFer, BS...." we dont need nerdy lingo...we need help...
others including myself would very much appreciate your help in the above 2 matters.
Kindly,Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Hope that helps,
Griff W. -
Can't see files on a network Hard Drive
So I have a new airport extreme and I wanted to put a drive on the network. I have two HDDs: one is the time machine that I normally have connected to my computer and another is a Hitachi that I just have Movies on. Both of them will show up under the APE in the shared, but none of the files that are on the drives show up as being there. I also tried backing up when my time capsule was on the network (I could see the shared drive icon on the desktop) but it said the backup volume couldn't be found. When I look at the disks in the airport utility it says that they have things written, but I can only see the empty free space when I open them from my MB. Can I access the files that are normally on the drives from the network without having to reformat them?
The Hitachi is formatted under the Journaled Mac OS as well.I had the drive on a user password, but changed it to just be accessible if you were connected to the router. With this setting I can see the files on my movie drive, but when I try to do I time machine backup, it just sits on the "making backup disk available" and never is able to start the backup. Is there some trick to allowing the disk to backup from the airport?
-
How can i see files in external micro sd??
I have a xperia go.
My question is how can I see the files in a external micro sd in the laptop? I only can see 2 folders: internal storage, and internal card.
Thank's!!Sorry, I was confused. Actually I see in the laptop Internal Storage and SD card. I thought that what I was seeing was the phone memory and the phone's internal storage memory. I thought I had to see three folders. Now I know that the phone memory is not seen in the laptop.
It also confuses me that in Astro File are the following memories with different names: ext_card, sdcard, sdcard1, sdcard0. I have come to the conclusion that ext_card= sdcard1(external memory) and sdcard=sdcard0 (internal memory), but I don't know because in Astro these memories have these names, and are repeated.
Thanks and regards! -
My Mac Can't See Files on External Hard Drive
Hi,
I'm having some trouble with my iMac today. It can't see any files on my NTFS External Hard Drive after a sharing change, I'm using Paragon NTFS for Mac OSX v8.0.0.
Yesterday evening I tried to share the drive over my network by clicking System Preferences / Sharing / File Sharing and then adding the drive as a shared folder. It is since doing this that I cannot see my files on this external HD. I have a second NTFS HD here which I connected and I can see the files on that drive so I don't think it's a software issue.
I have tried a few things to try and fix it but to no avail.
1. I have tried removing it from the shared folder list but that hasn't solved the problem. I tried adding it a second time just in case but that didn't do anything either.
2. I have repaired the disk permissions via disk utility
3. I have tried "defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder" to show hidden files but they still don't appear. I have reversed this so hidden files are no longer visible.
If I connect the drive to my Windows 7 laptop I can see and access all of the files.
I hope someone can help out with this issue. If you need any other information just let me know.
Kind regards,
Kim
System Details
iMac 24" Early 2008 Model
Core 2 Duo - 3.06Ghz
4GB RAM
OSX 10.7.2
iomega 1TB External Hard Drive
Formatted NTFS
Paragon NTFS for Mac OSX v8.0.0I had the same problem but only after I upgraded to Lion. I could see the files on my external drive on other Macs using older software. It seems that Lion wasn't seeing old files on the external drive. So we accessed the files on a Mac using Snow Leopard, copied all the files into one new folder on the same external hard drive and now they're there on Lion. Problem solved! I hope this helps
-
Can't see files in document / downloads folder on dmg disk image
So my last update OSX 10.6.8 crapped out and i couldnt boot the system anymore... So i decided to install a new system, before i did that i backed up my whole HDD with disk utility into a compressed DMG file. I went ahead and installed OSX 10.7 new mounted the DMG file, problem is i can't see any files in my document or in my downloads folder anyone has a solution for this or know what causes this problem. Please let me know.
A warm welcome to the forums Sue!
The Finder is a bit lackadaisical about updating itself, you can click back & forth enough times, closing folders, opening folders and eventually it'll be in touch, or you can try something like "A Better Finder Attributes", for it's "force the Finder to update stale information about your files" feature.
http://www.versiontracker.com/dyn/moreinfo/macosx/18736
Possibly this would help too, but haven't tried it...
http://www.finderpop.com/ -
I have one user who cannot see any files in folders on Sharepoint. She can see the folders themselves, and any file not in a folder, but gets a 'page cannot be displayed' when she clicks on any folder.
We have granted her full access but still the problem presists. No other users have this problem.
Any thoughts?Hi Gordi,
If the user tries to click the folder from other computer, can he see the file in the folder?
The Limited Access permission level is designed to be combined with fine-grained permissions to give users access to a specific list, document library, item, or document, without giving them access to the entire site. For example, if you grant user access to an item in a list and they do not have access to the list itself, you will see “limited access”.
As we don’t know the permission configuration on your entire site, I would suggest you remove the user from the whole site collection and re-add her again to see if it will work.
Hope this helps.
Lu Zou
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected] -
Can't see files/folders on server from windows
i'm not sure if this is related to the ACL issue (not being properly honored in Samba on Leopard), but i'll explain my problem and hopefully someone can point me in the right direction
i've set up file sharing with my server on several Macs and a couple of PCs without a problem, but on one PC, when i connect to the server, i can't see any folders at all on the server in the Explorer window. i also can't move files to the server as it tells me i don't have permissions. i am certain this is set up the same as the other PCs and ensured that the Windows user has file sharing enabled on my server.
please note that i'm fairly new to setting up a server so not too much jargon please!
cheers
ricThe problem may be how the CD was formatted. Macs support ISO-9660 better than any other crossplatform format.
Recently Software Architects has improved UDF support on the Mac, though I have yet to test it to see how true their claim is:
http://www.softarch.com/us/products/rdvd.html -
Mac OS 10 can't see files on HD coming from OS 9 and vice versa?
Hello, all! Got a TiBook 1Ghz with a 255 GB HD which I've partitioned in half, one for Tiger/OS 9 and one for Leopard. Problem: Any file placed on Vol 2 in OSX is invisible in OS 9 and vice versa, so one writes over the other. Vol 1 works fine. Tried reformatting, disk repair, DiskWarrior 9 and 10, re-installing all the operating systems. Suggestions? Thanks!
Hi, kennethfromtoronto & BGreg! I do know that OS 9 is not supported by Leopard, however I'm not talking about running 9 in Classic. This TiBook will run 9 by itself, but when I run OS 9 it is from Volume 1 which also has Tiger installed. I can boot from Tiger or from OS 9 from Volume 1 and they both run just fine.
The problem is that when do I boot from OS 9, it can't see the files on Volume 2 that were placed there under OS X Tiger. Conversely, when I run Tiger, the files I put on Vol 2 while running OS 9 are not visible. It's like I'm running a parallel universe. Unfortunately, this allows one system to overwrite whatever was put on the volume from the other system, and vice versa, with the net effect that I don't dare run OS 9 for fear of overwriting data on Volume 2.
Also when I do run Leopard from the second volume, it also cannot see any files on Volume 2 that were put there under OS 9.
Note that with Volume 1 there is no visibility problem, no matter which of the three systems is running. It happens with the second volume, whether it has an operating system installed on it or not.
Usually I am good at figuring this stuff out, but you see how confusing this is... My thinking is there might be a bug in the Apple formatting software? I used the Disk Utility from my external hard drive which runs Leopard.
Makes a good puzzle to solve, anyway... Thanks for the help!
DQM -
Can't See Files in Folder Copied from External Hard Drive to Desktop
I recently purchased a Jobo Spectator (portable image tank for storing photos). When I connect it (USB) to my iMac I see it and can copy files to my desktop. If I copy an entire folder from the device to my desktop, Finder tells me it contains 0 files and I can't see any files in it. However, if I try to recopy one of the copied files from the Jobo to the folder, Finder tells me the file already exists there and asks if I want to replace it. If I then cancel the copy, all of my copied files show up in the folder. This behavior seems to be consistent. There is no Mac driver for the device. It doesn't look like I'm going to lose any files from this behavior but I find it frustrating.
Does anyone have a clue? Thanks.A warm welcome to the forums Sue!
The Finder is a bit lackadaisical about updating itself, you can click back & forth enough times, closing folders, opening folders and eventually it'll be in touch, or you can try something like "A Better Finder Attributes", for it's "force the Finder to update stale information about your files" feature.
http://www.versiontracker.com/dyn/moreinfo/macosx/18736
Possibly this would help too, but haven't tried it...
http://www.finderpop.com/ -
Can't See Files On Remote Server
Wondering if anyone has a fix for not seeing files
on remote server... It's even got my host stumped. I have a fairly
large static site which I CAN SEE files via my host's "File
Manager" 90 Folders 3090 Files 52,336.74KB
But I cannot see files and folders when connected FTP via
IPSwitch or Dreamweaver 8.
I have followed IPSwitch's troubleshooting steps for this
issue, with no resolve. Emailed them a week ago, still no reply.
I have other sites at the same host (sub-domains of the site
I cannot see), and thoise subdomain sites files and folders show up
fine. With the primary site, even though I cannot "see" the files
and folders, I can still ftp to and from the server (get & put)
from DW or IPSwitch...No... I am looking at the correct folders, etc. The host is a
commercial host for Fortune 500's, I fairly confident in their
abilities. They think it might have something to do with long file
names. There is one clue, in that at one time I could view the
files and folders. Since that time it is possible I added a page
with a file name that is too long and is causing the issue. I will
probbaly need to temporarily delete these long file name pages to
see if it's the issue or not. I just thought someone here may have
experienced this. Not being able to view files and folders (even
though you can connect and transfer okay) is a pretty common
troubleshooting topic at the FTP software companies.
quote:
Originally posted by:
Newsgroup User
It's time to change hosts, if they can't figure this one out.
You must be
looking at the wrong folder with DW/Ipswitch....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DJ Website Designer" <[email protected]>
wrote in message
news:floqjp$rl2$[email protected]..
>
Wondering if anyone has a fix for not seeing files
on remote
> server... It's even got my host stumped. I have a fairly
large static site
> which I CAN SEE files via my host's "File Manager" 90
Folders 3090 Files
> 52,336.74KB
>
> But I cannot see files and folders when connected FTP
via IPSwitch or
> Dreamweaver 8.
>
> I have followed IPSwitch's troubleshooting steps for
this issue, with no
> resolve. Emailed them a week ago, still no reply.
>
> I have other sites at the same host (sub-domains of the
site I cannot
> see),
> and thoise subdomain sites files and folders show up
fine. With the
> primary
> site, even though I cannot "see" the files and folders,
I can still ftp to
> and
> from the server (get & put) from DW or IPSwitch...
> -
I'm using DW 8.0.2 on this computer (30-day trial of full
version CD I
have). On my home computer I have DW MX 6.1. I am trying to
edit existing
website files from a website that I didn't design. It has
".htm" files,
."html" files, and ".asp" files.
At home (with DW MX 6.1), I can access the website files,
download them, see
the html and edit the code, and upload them to the website.
This works for
all file types (htm, html, asp).
On this computer (with DW 8.0.2), I can access the website
files and
download them. But I can't see the html code for some of them
in order to
edit the code. All I see when I open those files is jibberish
symbols.
This is true for all 3 file types -- in other words, some of
the html files
work, some of the asp files work, and some of the htm files
work. By
"work", I mean I can see the code when I open them.
I just reinstalled DW 8.0.2 and HomeSite, and Extension
something, and
ColdFusion hoping somehow that would fix things. What
happened is that now
I can "see" some of the files whereas before I couldn't see
any.
Any ideas what else I could try?
I'm using Windows XP Pro.Okay, thanks. I'll have to try that.
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> DW would do that if you used it to validate the page, I
believe.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Newbie56" <[email protected]> wrote in message
> news:[email protected]...
>> Thanks again. I appreciate you taking the time to
explain things. I am
>> the type of person that finds it helpful to
understand the concept and
>> underlying reasoning involved in how things work.
That helps me apply
>> the concepts to other situations.
>>
>> I know this is probably overkill or too much to
expect, but I wonder if
>> it would be possible (and practical) for future
versions of DW to build
>> in error messages when certain syntax errors are
encountered instead of
>> just producing a blank page or producing a page with
all unrecognizable
>> gibberish.
>>
>> For example, if DW encountered a problem with an
unrecognized code in the
>> charset=whatever coding, maybe it could produce an
error message that
>> says "error in reading charset command" or
"unrecognized charset" in line
>> "charset=whatever". So, if someone accidentally
entered UTF-61 (a typo)
>> instead of UTF-16, the unrecognized charset error
message could appear.
>>
>> Or, in the common error you described, maybe DW
could produce an error
>> message that says "error -- multiple or conflicting
<body> tags found,
>> unable to proceed".
>>
>> Or, in general, "unknown error(s) in code detected ,
unable to proceed".
>>
>> I'm sure it can't accommodate every coding error,
but maybe some are
>> common enough that DW could provide a feedback
message for them.
>>
>>
>> "Alan" <[email protected]>
wrote in message
>>
news:C0EC64F9.29AFB2%[email protected]...
>>>
>>>
>>>> Thanks. That makes sense and it helps me
understand what the problem
>>>> was.
>>>
>>> no problem and good luck with things.
>>>
>>> suggestion- you could do a Find and Replace, or
just a Find for
>>> charset=unicode sitewide
>>>
>>> a difficult to understand thing that seems like
a contradiction at
>>> first, is
>>> that with each new version of dreamweaver, as
features and capabilities
>>> are
>>> added; it gets less tolerant of code syntax that
isn't just right.
>>> That's
>>> why folks ask to see the page/code. Dw can't be
as tolerant or failure
>>> resistant as a browser can be- a browser just
has to display something.
>>> Dw
>>> has to know exactly what the code is and where
the cursor is in the tree
>>> of
>>> syntax so it can decide what's proper code to
insert in the current
>>> cursor
>>> location.
>>>
>>> it's probably a weekly occurrence of someone who
says design view is
>>> blank
>>> YET the page renders fine in browsers- when the
page is checked they are
>>> using SSI includes where the included files are
complete html docs with
>>> <head> and <body> tags. Browsers
render the page because the browser
>>> programmers can code it to to deal with
imperfect pages- but dreamweaver
>>> sees multiple body tags and gives up trying to
make sense of it.
>>>
>>
>>
>
> -
Elements Editor not working and can't see files on IPAD
Aftr fooling around for the past 4 days trying to get picture int Adobe Revel, I pretty much gave up. All I want to do now is use PSE Editor and edit some pics. I can't get it to come up. Only the Organizer seems to work/ Any ideas?
Mary S
[email protected]OK,great! Lets work on the iPad now. What happens when you open Revel on th ipad and you log in? Have you tried logging out and back in or reinstalling and logging in?
What do you see? Can you see your libraries? Can you see your albums? Can you see photos?
Did you already have a Revel account when your files were migrated? If you did not, then the photos would move to <YOUR FIRST NAME HERE>'s library. IF you already had an account with an existing library and photos, then migrated files would be moved to a library named "Photoshop.com library". To change libraries on the iPad, go into Settings, if on iOS or Mac.
Pattie
Maybe you are looking for
-
Pricing Procedure related query
If I don't see an account key in front of the pricing condition in the pricing procedure - what does it mean? How is it picking the account key that i can see in the document. It is not a statastical condition type. Any help will be highly apprecia
-
Our daughter just got an iPad mini and I originally set it up under my Apple ID in order to create an Apple ID for her (she's under 13 so I set up iCloud family)... is there any way to switch the main user to her so that she can use iMessage and such
-
Firefox stalls whenever in Yahoo e-mail; Windows XP unable to shutdown
When I am in my Yahoo e-mail account, firefox stalls. The page does not budge. I have to close Firefox and when I try to restart, it says that Firefox is already running. I am also not able to shutdown the Windows.
-
Flash Player. Screensaver off.
How can screensaver be switched off when playying long videos/films?
-
Problem with creating links with the WPC (SP14)
Hi, I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linke