Can't see home wifi network

Today, I found that I could no longer see or sign on my home wifi network. Just my network; I can see my neighbors' wifi networks just fine (and connect on the unlocked ones).
I tried resetting the router and unplugging/replugging it multiple times, and also setting it up again via a pc. It is a secured network with a WEP password.
Weird thing is, my roommate who has a pc is having no problem seeing and getting on the network.
Did I mess up some network settings on my mac? I just switched to a mac about a year ago, so I'm pretty new at navigating through the settings.

Glad you got it working again, though I don't understand why resetting via the Mac worked when doing it via the PC hadn't. Another thing to add to the long list of things I don't understand I was sitting at my Mac trying to work out a list of debugging steps for you when your post came in, so I am delighted you let us know.
AK

Similar Messages

  • Airport Extreme green light but can't see the wifi network

    Hello, coming back from the holidays I can't see my Wifi network anymore (From PS3, Phone, Computers ..etc.). My airport has a greenlight and the internet is working fine if my computer is connected with an Ethernet cable. I re-did the configuration many times and I did a hard reset of both my modem and the airport. It is not setted to a hidden connection. All the settings are basic like before. The only difference is that I did the update to 7.6.4.

    I think you were right, my airport was broken and I noticed that at the end of the configuration process where there's a green checkmark it was written in the bottom that a wifi device wasn't working properly. Nothing could be done to make it work though.
    I bought a new Airport Express now but I still have a major problem. I was able to configure it through wifi with my iMac without any problem and now it is connected to the internet via wifi perfectly but i STILL can't see the network with either my Android phone or my PS3 console !?
    - Brand new airport express
    - configured to "create a wifi network" with a WPA2 password using the simple steps of the airport utility
    - Airport Utility 5.6.1
    I did reset the airport express a few times with the utility and by removing the power cord. I also did reset my iMac and I can still connect to the wifi just fine with it.

  • My iphone can't see any wifi networks

    my iphone can't see any wifi networks ... i tried to reset network setting and reset all setting and update the ios system but no way

    I, too, fear it might be a hardware problem . I removed all security from my router but still no networks appear in the list nor can I connect directly by typing in the SSID. Tried two routers: Apple Airport Extreme and a Linksys something-er-other provided by Bell.
    I will give HP a call tomorrow and see if they can sort this out.
    Thank you for your help/advice!
    Edit: almost certain it's a hardware problem: I clicked on the Help button while on that "Scanning for networks" dialog during initial setup and as one of the "helpful" suggestions, it said my Mac address was 00:00:00:etc.

  • IMAC can not see any wifi networks at all?

    IMAC can not find any wifi network at all. A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all. I have several other computers and they all see the wifi networks fine. I assume it is a hardware issue but the hardware test I preformed comes up with no errors. Anyone got any ideas?

    Hello Sage10,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628?viewlocale=en_US
    Best of luck,
    Mario

  • IPhone 4S (and iPod Touch) can't see my wifi network.

    My iPhone 4S, iPhone 4, and a few iPod Touches cannot see my wifi network. They can all see my neighbors'. My iPad and computer, however, can see my wifi network. They have all updated to the new iOS 6 recently. Help!!

    Is this your problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • Since upgrading to latest iOS, my WLAN can not see many wifi networks,  my friends iPhones pick them up easily. What should I do?

    Since upgrading my 4s iPhone to the latest iOS , I now can not see many wi-fi locations beyond my home network.  Friends can find and connect to many wifi networks yet my iPhone does not even see them.  I can not recall prior to the upgrade whether in the settings whether turning on the wifi was shown as wifi or WLAN however the on/off is now WLAN.  Not sure what the difference is.  I totally reset the phone but no improvement.  Can any body help me?

    I have tried this however it did not make a difference.  I found another user on the support pages that has the same issue.

  • Original Express can't see Extreme Wifi network

    I have a new 802.11n Airport Extreme (bought last year) and a very old original 802.11g Airport Express. The Extreme is providing the Wireless network in the house, and it works great. I want to hook the Express up to my stereo so I can use Airplay with it. I tried to set it up to connect to the existing Wifi network, but when I'm configuring it in Airport Utility, it won't see the network, so it can't connect. My iPhone, right next to the Express, can see and conncet to the network just fine.
    I have the 2.4 GHz and the 5 GHz network using the same SSID. Do I have to separate those? That would be annoying, but I could possibly live with it.

    I have the 2.4 GHz and the 5 GHz network using the same SSID. Do I have to separate those?
    No, that shouldn't be necessary. What Radio Mode do you have your Extreme configured for. By default, it would be set to "Automatic." If it is, or it has been reconfigured to use only the 802.11n mode on the 2.4 Ghz radio band then this may be the reason why the 802.11g Express is having difficulty connecting to it as a wireless client.

  • Can't see public wifi network

    Hi!
    I want to connect my macbook pro with an open and free internet network in my neighborhood. I could always connect to it with older mac's + istumbler (but that software doesn't work anymore with snow leopard) and with windows xp (which uses a realtek software to control de wireless card of that computer).
    Now that I have this new notebook, I can't see that network on the airport list that appears when I click the airport icon ... but it does appear when I look at the System Profiler list of surrounding networks.
    Another information that could help, is that the name of this hidden free and open network, is exactly the same as another that does have a wep encryption. Maybe airport extreme has to choose one of them and preferes the one with more security? Is there any way to access to that open network without the needing of extra softwares as istumbler? Any ideas?

    Hello loadix. Welcome to the Apple Discussions!
    Have you tried selecting "Join Other Network" from the AirPort dropdown list, and then, entering the Network Name (aka SSID) of this network. If there are more than one with the same name, AirPort should be able to connect to the unprotected one. However, I would be a bit cautious to the extent of using "free" networks as they could actually be Ad-Hoc networks instead where your data communications will be unprotected.

  • 1st Gen Ipod Touch can't see any WiFi networks?

    My friend gave me his old Ipod Touch, and everything worked fine for a while. Recently though, the WiFi just cut out and I can't connect or see anything. When I open up the 'Connect to WiFi' menu, there are no options.. even though I know there is internet because my computer is connected. I have tried typing in the name of the networks and I get an error that reads 'This network was not found.'
    I have tried reformatting it to factory specs three times through Itunes, and it still won't show up.
    Anyone have any ideas? Is the wireless card/adapter dead?
    Thanks

    Is this your problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • Why can't I see my home WiFi network?

    I have had my iPod touch for almost two years and have had no trouble with it - until today.  I am presently not connected to the internet through my home WiFi network and can't find my network in Settings/Wi-Fi.  I can see other secure (and non-secure) networks, but not mine.  I am presently sitting right beside my AirPort Extreme and am connected to it with my laptop.  So the Wi-Fi station is working.  My iPod has the same settings it has always had (Wi-Fi is on and Ask to Join Networks is off).  How can it see other networks by not my own?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Is it this problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Can't Open Some App using home wifi network, must use 3g to do it

    My iPhone is 5s. Just like the title said, whenever my iPhone / iPad connected to wifi I can't connect to some games like Puzzle and Dragon even though I can browse using safari, using fb / twitter / instagram just fine. I keep getting connection error (in game of course) whenever I open that game (not only that game actually). Whenever I open the game, I can get myself automatically logged into gamecenter, but the can't connect to the game itself.
    I've tried changing the dns from the default 192.168.1.1 to google's and resetting the cache (airplane mode -> on -> off). But to no avail.
    Have tried to open the game on my father's iPhone and iPad, and my sister iPhone too. I suspect my problem is my wifi configuration isn't compatible to ios(?).
    Sometimes I experience updating app problem too on home wifi network, I can browse app store but can't update any app.
    While my phone can't, my friend's android can play the game just fine using my home's wifi network.
    Please help me fix this.

    Welcome to Apple Support Communities
    First, when you are going to turn off or restart your Mac, you will see a box called "Reopen windows when logging back in" in the shutdown or restart window. Untick this box and see if the App Store opens automatically in the next startup.
    If it starts, open System Preferences > Users and Groups > Login Items, and see if the App Store shows up. If so, remove it from this list

  • Can no longer see ANY wifi networks

    I have a 4.5 year-old PowerBook (titanium) 550... it seems my airport card is simply no longer working. No matter where I am, even when I know there is a network there and I have the password to access that network, my airport card cannot seem to see any networks. This includes networks that I control and know the settings have not changed.
    This started about a month ago; for a few days I couldn't see any networks. Then, suddenly, I was able to, and connect without a problem, for about a week. Now, however, it seems the problem has returned and is permanent.
    Any ideas? Could the internal antennas be messed up? Or do the airport cards sometimes just go bust?
    thanks.

    I have the EXACTLY same problem.
    My Apple TV (3rd generation) does not attemp to find any wifi networks since two day ago.  Sometimes it does find and connnects to my home wifi network, but it loses connection in  a couple of minutes at the longest.  When I plug in an ethernet cable, the apple TV works just fine.  But when I disconnect it, same thing happens all over again.  I have tested several modifications and now I am sure this is not an issue  of the router or the network settings.
    If anybody has a solution, please be kind to let me know.  I can't even get my apple TV replaced since I'm overseas.

  • Can't get my ipad1 to connect to my home wifi network after doing restore

    Can't get my ipad1 to reconnect to my home wifi network after doing restore, help please

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

    Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
    or must the printer I want to use also have a wifi connection ?
    I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW.  We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
    I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

    You must use an airprint printer directly connected to wifi through it's own wifi card.
    See here for info:
    http://support.apple.com/kb/ht4356

  • I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    Settings > wi-fi  then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
    Now at the top tap on "forget this network".
    After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

Maybe you are looking for

  • Why am I having trouble making any download helper work?

    I have a new MacBook Air. I have tried downloading several Download Helpers to download videos from YouTube, but none seem to work. When I downloaded the product "Dowload Helper" I did see an icon on the tool bar. When I would open Firefox I would se

  • How to read tables and fields from a transaction screen.

    hi all, i am having problem in reading fields and tables from a screen, could any one help me in mapping tables from a structure as well. it will be very help full if u had any documentation. Thanking u kiran

  • Move all pictures of current catalog to different drive and folder

    The drive I use today is getting to small for more pictures in the future. I want to move all my pictures of the current catalog to a new drive (different drive letter) and new file folder structure (directory name). How can I do this in the easiest

  • How can i return a book?

    I bought a the 1st edition of a book on itunes and i want to return it and buy the complete volume. I haven't read the book and I haven't bought it for up to 20 mins. How do I return it?

  • SCE 2000 3.6.5 - Web Redirection

    any known bugs in the version 3.6.5 while redirecting a user to a website? the  IE is indicating websitefound and waiting for reply with a blank page. the package is configured to block all flows and redirect the user to a website..