Can't see Laserwriter 8500 on wireless network

I am trying to connect a laserwriter8500 to my network without any success, I use a Macbook(10.4.9) conected wireless via Apple express to a Netgear DSL Router DG834. I also have a Brother MFP working fine, I connected the Laserwriter via ethernet cable.
Pref/Print&Fax/Printer Browser/More Printers wont see anything, I admit I dont realy know what I am doing? I dont know how to set up or use appletalk.
Also I dont get any light activity on the router, as I do with the brother. I tried swapping cables, could it be a router problem?
Any step by step advise would be helpful.

That printer can do LPR/LPD protocol, which is an IP protocol and should go through any router including Brand-X wireless. If you are not seeing the "connected" lights, you may have a crossover cable where a straight cable is needed.
If you look through the clear ends of a straight cable, you will see the 8 little colored wires are the same colors in the same positions at each end. A crossover cable will have two pairs swapped.

Similar Messages

Can't see shared printer over wireless network

I currently have a newer HP F340 injet printer connected to my emac which is on a wireless network (Linksys) so that I can share internet connection with my MacBook Pro. Both are running Mac OS 10.4.8. When I try to print on my MacBook Pro, I don't even see the shared printer, in fact, there isn't even a separate chioce for shared printers. I used to have a Lexmark printer that actually worked on the network.

After following some advice from a different posting, I loaded the gimp print drivers and recreated the printer in the printer listing using the gimp printer. This worked! The only problem I had was that I had to load the whole Mac OSX base system and then the print drivers. This messed up my system and I had to reset a bunch of user preferences, etc. It took me a couple of hours.

My PC (Windows) can't see my Time Capsule wireless Network

I just installed a wireless network with a Time Capsule and it's working fine for the three Macs and the printer in the household. However, I still need to have access to the wireless network for one PC running Windows. Problem is the PC doesn't "see" the Time Capsule Network. What am I missing and how can I set up the PC on the wireless network?

Try downloading AirPort Utility for Windows here:
http://support.apple.com/kb/DL1391

I Can Only See AEBSn Via Existing Wireless Network

I've been able to setup to set up my AEBSn without any problems, but when I try and access it I get an error messaging saying "There was an error joing the AirPort network "NetworkName".
AirPort Utility can only see the AEBSn if I am still using my existing wireless network. If I select AEBSn for my network, the icon disappears from the AirPort Utility program. Rescan doesn't find it. If switch back to my original wireless network AirPort Utility finds the AEBSn again.
In case it matters, my DSL modem has built in wireless.
It seems like I'm able to see that the AEBSn is around, but I just can't connect to it.
Does anyone have any suggestions that might help?
Thanks in advance.
-Michael-

You should have the AEBS configured to work at 2.4 GHz in an 802.11b/g compatible mode.
If the AEBS is set to automatic channel selection, set it to use a fixed channel. Try channel 6.
Disable the wireless portion of your DSL modem. If the wireless part of your DSL modem can't be disabled, ensure that the DSL modem and AEBS are using channels that are as far apart as possible.
If your DSL modem's wireless is still enabled, does it have a different wireless network name than the AEBS?
Is your AEBS configured to operate as a closed network (SSID broadcast disabled)? If so, change that option. A closed network adds no security. The SSID (network name) is still broadcast to any connected clients and therefore easily discovered.

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

Can't detect a German PC wireless network I know is there

Hi,
I'm new to this forum and I hope someone can help me.
I'm visiting friends in Berlin from Canada with my Powerbook G4 with OS10.4.11. I can't detect my host's wireless network even though I can detect 24 other wireless networks in her apartment building (I downloaded MacStumbler and used it to check). I know her network ("Jenny") is not hidden because she got a friend across the courtyard the same apartment building to check if she could see it on her computer this morning, which she could. I also tried to find "Jenny" by clicking on "Other" and then entering "Jenny" in "Network Name" and entering the WAP password my friend gave me (I also checked that with her so I know it is right) under both WPA Personal and WPA2 Personal. That didn't work either. I also followed advice on this forum and got rid of that stupid pop-up box saying "Your Network Settings have been changed by another application" when I clicked on System Preferences/Network
What should I do? All my friend knows is that she has a PC, she doesn't know the brand or model of her router or her ISP provider. If I can't solve this, I will be in big trouble as I had planned to stay in Berlin for a few months using my friend's wireless network to get online every day. I can get online fine via her router when I have a cable plugged into my computer in her flat, but I am staying across the courtyard in their second flat and we can't string a cable across the courtyard... I've never had problems before connecting with any PC wireless network, in Europe or N. America.
Very grateful for any help.

It won't let me do that. When I go to the Network window of my System Preferences, it says Location: Automatic, and it won't let me click on New Location or on Edit Locations - they are pale grey.
Also, it says Show Network Port Configurations and it gives me six: Internal Modem, Airport, Bluetooth, Built-in Ethernet, Built-in Firewire, VPN (L2TP) whatever that is, and Ethernet Adaptor (en2), and I don't know if that is the cable from my friend's router or the new stick adaptor I bought (it doesn't change, whichever I have plugged in), but all these are also pale grey and I can't click on them or on the boxes marked New Rename Delete or Duplicate.
Also the stick adaptor I bought is not showing up in my Finder window as an attached device - shouldn't it? This means I can't eject it safely when I want to. There are no instructions enclosed with it or on the manufacturer's website.
When I click on Network Status with the cable attached, it says I am currently connected to the Internet via built-in Ethernet with the IP address 192.168.0.112 so I guess built-in Ethernet must be the cable. So if the Ethernet Adaptor (en2) is the adaptor stick, maybe it isn't being recognized by my computer because it is on channel 13?

Since downloading iSO 5 i can no longer connect to a wireless network.

since downloading iSO 5 i can no longer connect to a wireless network. I have tried both at home and at other wireless hotspots. it would appear that none of the previous wireless connections work either? i just get the error "unable to connect to "x"
i have tried to "forget" and rejoin but that has not worked either.
what to do pleeeease?

Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
Did you try to reset the network settings on your device?

Why can't I connect to my wireless network?

Why can't I connect to my wireless network? My phone is set to it but I can't connect with my ipod touch. Do I need to reset my wireless?

- Reset the iPOd. Nothing will be lost
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Two Macs can't see each other on same network

We have an iMac and a Mac Book Pro on the same apple network at home. The iMac can see and connect to the Pro and exchange files but the Pro can't see the iMac in Go > Network. All sharing settings are the same. Any thoughts welcomed.

How many machines are on your network? If you have over 7, then here should be an entry called "All..." in Shared in the Sidebar. Click on that. It will show you all the servers that are available on your network. You can also get to this list via Computer (Command-Shift-C) and click on Network.
Shared in the sidebar shows a max of 7 servers, with Back To My Mac's at the top (if any), then servers you have mounted share points on (if any), then the top 7 (in alphabetical order) servers in Network (a.k.a. "All...").
Hope that helps.

Tecra Z50-A can't see mobile broadband in the network

Windows 8.1 does not recognize Sierra LTE mobile braodband on my Tecra Z50-A.
There is no software on the support site of Toshiba. Neither Sierra Drivers nor AirCard watcher.
Can not see the hardware in my hardware manager.
Can't see mobile broadband in the network area.
Need help!!!
Many thx

Thanks for the instruction. This is exactly what I did.
Extrakt the file contained in the zip-file
double-click the TC00640900B.ex file
Toshiba Archive Extractor pops up
lots of files will be extracted.
Windows Popup "Will you accept...." Mark "Yes" - Popup closes than nothing will happen!

If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

If I buy the iPad 2 with 3g, can I use it on a wireless network without using the 3g?

I leave both 3G and Wireless permanently enabled. I find that whenever I am within range of one of my chosen Wireless networks it automatically uses Wi-Fi rather than 3G. When I am not my Ipad2 uses 3G.
So in essence Wi-Fi takes priority over 3G.

Wireless Internet works but Macs can't see each other on same network.

First: Ahh!
Second: I have an iMac & and MacBook connected to the same Wifi connection at home. I'm using the Belkin F5D8235-4 v2000 with Firmware 2.01.08. The most up to date firmware and Mac compatible. Both have IP addresses within this range 192.168.2.random number. Both have "File Sharing", "Remote Login" and "Remote Management" check off. Both always see the Belkin n+ under shared items (the Belkin +n has a memory stick attached to it). Here's the kicker...when I restart for a few minutes I can see both computers under Network and Shared. Then poof, it's gone. As I write this my MacBook can see my iMac but my iMac is Stevey Wonder, not a thing in sight.
Why won't my iMac and Macbook play nice? Are iMac's rasist? Not implying Stevey Wonder is rasist. Wow, back call on my part.
Ohh, one more thing (feels good to use that line in a Mac forum). I have installed Windows 7 on both computers, it problem also happens in windows too. I'll bring that to another forum, just thought you should know.
If you need more details or want to know what kind of sandwich I'm making just write below. It's ham. Help me please.
Third: Ahh! This is the best sandwich ever.

How to change a computer name, join a domain, and add a computer description in Windows XP or in Windows Server 2003
http://support.microsoft.com/kb/295017
How to search for a computer on a network. If you know the name of the computer, you can access the computer by using the search companion, or you can search for the computer in My Network Neighborhood.
Search for a computer when you know the name of the computer
If you know the name of the computer, you can search for the computer on the network:
1.
Click Start, and then click Search.
2.
Click Printers, computers, or people.
3.
Click a computer on the network.
4.
In the Computer name box, type the name of the computer that you want to find, and then click Search.
Search for a computer when you do not know the name of the computer
If you do not know the name of the computer, you can browse for the computer on the network:
1.
Click Start, and then click My Network Places.
2.
Click Entire Network.
3.
Double-click Microsoft Windows Network.
4.
Double-click the name of the domain that you want to search.
5.
Double-click the name of the computer that you want to access so that the shared resources are displayed.

Can't find Laserwriter 4/600 on network from Intel Mac mini

Problem: Cannot find/print to networked LaserWriter using Airport network.
Kit: Mac mini 1.66 GHz Intel Core Duo, 512 MB running Mac OS 10.4.5; Silver Apple Airport Base Station unExtreme; Netgear 814 combined switch/router/DSL modem; Asanté LocalTalk-to-Ethernet Adaptor; Apple LaserWriter 4/600PS.
Method: Airport bridges from wireless (Mac mini) side of network to wired (LaserWriter) side via hub/router.
This setup worked perfectly for many years but did not survive the encounter with Intel Mac mini.
Resolution attempted: Carried out detailed instructions involving switching devices off and on in strict order, using Printer Setup Utility etc.
These instructions are posted on Asanté website:
http://www.asante.com/forums/topic.asp?TOPIC_ID=3164
Getting this to work requires that the Ethernet connection be switched from AirPort to Built-in Ethernet and that the computer be physically connected to the hub by an ethernet cable. The unwanted effect of this is that it denies wireless access to network/internet services formerly enjoyed by Mac & PC computers.
Running the identical Asanté routine with AirPort rather than Built-in Ethernet as the connection method results in the loss of the LaserWriter to the network.
Any ideas?

You can rest assured that printing to a AppleTalk
printer through wireless network is way down on the
list of things that is ever going to be tested in the
labs.
Point taken. I'm just curious about what might be going on.
Since I can't test here - the only thing I can do is
think of possible differences between your two
networks (wired and wireless)
I'm not an expert but as I understand it the Intel Mac mini should "see" the network as a single contiguous entity. In other words the AirPort Base Station that bridges between the wireless and the wired parts of the network should be entirely transparent, so I think the answer to your next question is yes.
Is your network flat (sameIP address range and routes
wireless as wired)? I could see issues if there were
a firewall or you had separate networks set up (you
can have different networks that talk to each other
through gateways and routing - but things like
Bonjour/Rendezvous and if my rusty memory is to be
trusted - Appletalk too - depends on things being in
the same "network" for broadcast packets to get to
everyone.)
Again, I don't know if it proves anything but when I had another computer on network here, the IP address assigned to it by the router was within the specified range. This machine is getting on for three whole years old, has begun to self-destruct and so it's gone for repair under the last gasp of its AppleCare warranty extension.
The Intel Mac mini can also "see"/print to a Bonjour wireless printer. This may also answer your question about the possibility there being two networks here rather than one. On the other hand, I guess that the ability to print to the Bonjour device does not involve any bridging between the wireless and wired parts of the network, so this may not be relevant.
If the concept of different networks does not make
sense - open up the Network Utility application and
post the results of your "Display routing table
information" from the netstat section...
Finally, here's what Network Utility, Netstat comes up with:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 20 55 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 17 199665 lo0
169.254 link#5 UCS 0 0 en1
192.168.0 link#5 UCS 2 0 en1
192.168.0.1 0:9:5b:46:64:3 UHLW 19 17 en1 1177
192.168.0.3 localhost UHS 0 0 lo0
192.168.0.255 link#5 UHLWb 1 12 en1
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#5 UC en1
ray-thomsons-compu 0:14:51:ef:99:b1 UHL lo0
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
I hope it makes more sense to you than it does to me!
Kind regards,
Ray
PowerBook G4•1GHz•512MB•15•AirPort unExtreme Mac OS 9.2.x

New iMac can't see Laserwriter Select connected to a PC on same LAN-- why?

I've just returned to the Mac universe after a five year hiatus. When I discovered how well Macs play with PCs and Unix these days, I decided to come back.
There's just one issue: I can't print to my Laserwriter Select 360, connected by parallel port to a Windows XP Pro PC on my LAN. My new iMac doesn't see the printer at all. The imac does see the PC's workgroup in the Network Neighborhood, and I can mount the shared volumes of that PC on the mac with no problem, so the Mac can talk to the PC for filesharing, anyway. (smb:// address used)
Applecare has no clue why I can't see the printer. They told me to turn on Windows Sharing and Print Sharing, but that had no effect. The Windows machines on my LAN can all see and print to the shared Laserwriter Select 360, no problem. They're all running Windows XP pro, latest patches.
The iMac of course has the latest Tiger. All machines are on my internal subnet 192.168.0.*.
I just got a new cartridge for the Laserwriter, and there's no reason to retire it-- that printer works great. I just can't believe/accept that the iMac can't be made to print to an Apple printer! (Also, I've heard that appletalk->ethernet bridge solutions are flaky so that's not an ideal route).
Any/all ideas welcome.
imac g5 Mac OS X (10.4.3)

Here's the result. The PC is on 192.168.0.2, and the iMac was assigned .18 by DHCP.
I just tried adding a lexmark printer to the PC (over USB) to see if there might be some difference. The other windows box on the lan sees the LexMark same as it sees the Laserwriter (and both show up in the output of smbclient below). Needless to say, the iMac doesn't see the LexMark either.
Thanks for your help with this one...
will-kesslers-imac-g5:~ willkessler$ smbclient -NL 192.168.0.2
Domain=[WILLPC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Sharename Type Comment
My Documents Disk
IPC$ IPC Remote IPC
print$ Disk Printer Drivers
SharedDocs Disk
AppleLas Printer Apple LaserWriter Select 360
Downloads Disk
My Pictures Disk
ADMIN$ Disk Remote Admin
C$ Disk Default share
Printer Printer Fax via eFax 3.5
LexmarkX Printer Lexmark X63
session request to 192.168.0.2 failed (Called name not present)
session request to 192 failed (Called name not present)
Domain=[WILLPC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
Server Comment
Workgroup Master
--------- -------

Can't connect AE to existing wireless network

I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?

I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

Can't see Laserwriter 8500 on wireless network

Similar Messages

Maybe you are looking for