Can't see latest keynote through airport express.

i tried to see the latest keynote from apple here:
http://www.apple.com/quicktime/qtv/keynote/
but apparently i can only see it when my wireless macs are disconnected from my airport extreme and connect through wire.
do i have to change setting in the airport express ? ( I tried changing the channel from 1 to automatic but that is not the solution).
any help would be appreciated.

Never mind. I figured it out. The printer, which was set up automatically for the airport, had selected a generic printer driver that didn't allow double sided printing. I selected the appropriate driver and it works.
Andrew

Similar Messages

Can't connect to internet through Airport Express anymore

Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
Thing is, Airport/wireless is working. Can stream audio to my home stereo.
And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
What gives?
Any ideas?

Hello mnkyby. Welcome to the Apple Discussions!
It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
Try this ...
o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
o Go to the Internet tab.
o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
If the latter, try the following ...
Modem/Router Power Recycling - Quick
o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
o Power-on the DSL/Cable modem; Wait at least 5 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the DSL/Cable modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)

No jobs keynote through airport express

i tried to see th latest keynote from apple here:
http://www.apple.com/quicktime/qtv/keynote/
but apparently i can only see it when my wireless macs are disconnected from my airport extreme and connect through wire.
do i have to change setting in the airport express ? ( I tries changing the channel from 1 to automatic but that is not the solution.
any hellp would be appreciated.

btw with the airport express connected, i can open quicktime player, and it show content, after that it fails to show the keynote)

Macbook can't see time capsule through airport utility; powerbook can.

This question probably applies to Airport Extremes as well as Time Capsules, but I happened to see it with a new TC.
My Time Capsule came in yesterday. My plan was to bridge it into my existing network to serve 802.11n over 5ghz. I did the initial setup using a 12" powerbook and it worked fine. I set the Time Capsule in bridge mode and for 802.11n 5ghz, plugged it into my network, and reset. The light on the TC turned green and all looked like it was working. At least, until I tried to connect through my Macbook Pro.
I installed the Airport Utility software that came with the TC, rebooted, then launched Airport Utility -- and it couldn't find any devices. It can, however, see the Airport's wireless network. After a reboot of the TC, it can also connect to the Airport's wireless network. I can get to the internet and the local network, but cannot see the Airport through Airport Utility and cannot see the Time Capsule disk. It's as if Bonjour is being blocked between my laptop and the Airport. This happens whether I'm connected to the TC wirelessly or wired.
I've tried restoring to factory defaults and starting over (I still can't see the TC, even after a hard reset) and I've tried a hard reset of the TC (I had to, actually -- it hung during startup several times). In each case, the powerbook can see it, but the macbook can't. I'm out of things to try. If I can't get this resolved soon, I'm going to have to return the TC, since it's useless if I can't access the disk.
I was planning on upgrading the two computers to Leopard over the weekend, then use the TC for Time Machine for both computers, but if it's not working for Tiger I'm worried that it won't work for Leopard, either.
Is there any variable anyone knows of that blocks a computer from seeing an base station through the Airport Utility? A non-obvious firewall setting, perhaps, or something that could be blocking Bonjour? Does Airport detection even use Bonjour, or am I on the wrong track?
Thanks

An update: I can see the Airport configuration of the TC through my Macbook if I pick File->Configure Other... on the Airport Utility, and then put in the IP address. Which leads me to believe that it's a Bonjour issue, but I haven't figured out more than that.
Of course, the TC is still useless for Time Machine if I can't get to the disk, so the problem remains.

AirPort Utility can't see either AEBS or AirPort Express using either comp.

I have an AirPort Extreme Base Station (AEBS) and an AirPort Express (APE). The dsl connects to the AEBS via ethernet (in the first slot), and the AEBS connects to the desktop via ethernet (in the second slot; it has no AirPort card). The PowerBook (PB) connects to the network via its AirPort card, and the APE is used to extend the network range.
All of this worked as of last night.
This morning when I woke the PB, it wouldn't connect to the network automatically. I tried to connect manually, but it wouldn't accept the password. (Maybe I'd forgotten, when's the last time I had to enter it?) I went to the desktop to set up the AEBS to reset the password. Both the AEBS and AirPort Express showed up on AirPort Utility (AU) on the desktop before doing so.
After resetting the password, neither showed up in AU. (I suppose it's not surprising that the APE wouldn't, but the AEBS is connected via ethernet, and the ethernet is working or I couldn't connect here as set up.) I get the message that AU can't detect any Apple wireless devices. I rescanned several times with no luck. And I have pressed the reset button on the AEBS to no avail.
I also can't see either the AEBS or the APE with the PB, which does have an AirPort card, as I mentioned.
Any help or advice would be appreciated.

Theirry, I had (among all the other things I'd done) already pushed the reset button for a little while, but that didn't work. So, not knowing what else to do, I pushed it and held it while I counted to ten three times, and that worked. Probably one could get away with less.
After that, I had to start over again with the AEBS on AU, but I gave it the same network name and the password I thought I remembered, and the APE rejoined it automatically.
I hope that helps.

Can't see External HD through Airport Extreme Base Station

I have upgraded to the Apple Airport Extreme Firmware 7.1. Previously I was unable to see my 2 External HDs that are connected to the base station via a powered USB hub. Both of the HDs are FAT32s. I had hoped the firmware update would resolve the problem. But I am still not seeing the HDs. I connect to the base station wireless through a MacBook.
Any clues/help would be appreciated. I've scanned through several posts and seen people with similar problems and others that can see their HDs but not some files.

I suggest using the following instructions to re-check your AirPort Extreme Card/Antenna cable installation in your G4 iMac just to be sure nothing was missed: iMac (17-inch 1GHz) and iMac (USB 2.0): Customer-Installable Parts Instructions
Also, check that the antenna cable is firmly attached per this Apple Article: http://docs.info.apple.com/article.html?artnum=108039
I have the base station connected to a pc so I can't download iStumbler.
For the PC, you can use NetStumbler instead.
I'm not sure how to check if a signal is being sent through Airport utility.
Instead of the AirPort Utility, you can use the Internet Connection utility to verify signal strength of your base station. To access this utility, just right-click the AirPort status icon in the menu bar, and then, select it from the drop-down menu.

Can I use time machine through airport express and an external hard drive?

I want to be able to use time machine remotely. I own a WD 1TB passport external hard drive. If I connect it to an airport express, will it backup my macbook pro?

Not sure what you mean by "remotely". Remotely on your network, or remotely over the Internet?
In either case, the AirPort Express does not support a hard drive. You would need an AirPort Extreme for that.
Trying to use Time Machine over the Internet is incredibly slow and unreliable. Remember, you are uploading. Upload speeds are often 10 times slower than download speeds with most Internet Service Providers.

HT1595 I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules

No colors when printing through AirPort Express?

I knew I couldn't use all the features (e.g. scanning) of my HP all-in-one printer F2180 through AirPort Express instead of USB. But is it normal I can't print in colors? Can it be fixed?

I am having the same problem. I am running an AirPort Extreme to a HP Deskjet F4180.
I spent two weeks on the phone and email with HP and they finally told me that it was a problem with Apple.
I just got off the phone with Apple support and they told me it is a driver issue which they have no control over. They told me to see if somebody in this forum had a work around or to search the web for a generic driver that "may" fix the problem.
If I find an answer I will let you know.
Good luck!!

How can I set up an older airport express using the newest airport utilities?

How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up. Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
Thanks for any suggestions

How can I set up an older airport express using the newest airport utilities?
Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
See this thread for more details and instructions:
https://discussions.apple.com/message/21397085#21397085

I have not been able to see my ATV or Airport Express.

I have not been able to see my ATV or Airport Express listed under the airplay icon in itunes 11. This started since I upgraded to iTunes 11 on my Windows 8 laptop.
My ATV is hardwired to the wireless router. My laptop and airport express connect to home network wirelessly. All devices are running their latest versions.
Any ideas?

Who is your ISP?

Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone.

Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone. It still recognizes the printer on the iBook (bonjour), but not on my Windows notebook (work). The only device that still connects via wireless is the PlayStation 3.

The latest firmupdate solved the issue.

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

Can't see the "keynote" folder in application supports iwork

I'm trying to uninstall some purchased themes that I don't like. As instructed, I followed the path library>application supports>iwork>keynote>theme. However, I can't see the "keynote" folder, although I showed hidden files. There is only the "pages" folder in that "iwork" folder. Can anyone please help me out?

There are 3 Libraries on the computer. Go to Macintosh HD > Library > application support > iwork > Keynote > themes.

When I connect my iphone directly to my receiver then connect to spotify, it plays through both speakers but when I connect wirelessly through airport express it only comes out through one speaker. Any thoughts?

When I connect my iphone directly to the receiver through a cable, it plays Spotify just fine but when I try to play wirelessly through Airport Express, it only plays through one speaker. Any thoughts?

yeah, that's what I figured.. I guess I'll try now to figure out exactly how to do that!

Can't see latest keynote through airport express.

Similar Messages

Maybe you are looking for