Can't see monthly depreciation in a non-posting depr area

Hi Folks,
Is there any report where I can see monthly depreciation based on a non-posting depreciation area?
Althought I found out many reports that show accumulated depreciation, I couldn't find one to see month-to-month depreciation fee.
The S_ALR_87012936 report has 2 problems: 1st - It shows only 5 periods; 2sd - it shows wrong values to my non-posting depreciation area.
Thank you very much.

Hi.
S_ALR_87012936 report would be perfect if I could see more than 5 monthes. I don't know, but I'm able to see only from Jan to May in the monthly view. Is there a way to see ahead?
All others reports only show Accumulated Depreciation, not monthly.
If I ask for 31.12.2010, I will take only the Year Depreciation and not December-2010 depreciation.
Any tip?
Thank you all again.

Similar Messages

  • On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

    On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
    Thanks in advance for your help!

    With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

  • Hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

    hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

    hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

  • Can't see month view in iCloud calendar

    When I click on the month view tab at the bottom of the iCloud calendar screen, nothing happens. For that matter, clicking on the day tab doesn't do anything either.
    As another annoyance, in the week view I see the weeks events that were brought in from my Mac, but going to the next week shows no events. HELP!

    I am having the same problem. It started when the month view was not available. It took me a long time to figure out that when I minimize the month view, it shows up on the dock as a teeny tiny icon. When I click it, nothing happens. When I go to Week View then my calendar shows up. NOW though, my week view has disappeared and now I'm only left with DAY view. The same exact thing happens in Week view. I have no window, nothing to "grab" that I can possibly see to get it back on my screen. BUT it will be a teeny tiny icon when it's minimized.
    The only thing I can think of is that I'm a tech teacher using a projector and my laptop changes resolutions with different software programs. I have had iCal open when the resolution has had to change. The only thing I can think of is that somehow that did something to the window and I can't get it back.

  • Can't see month view iCal 2.0

    I can see day view, I can see week view. When I switch to month view there is nothing there. If I minimumize the window it shows up as a blank space in the dock. ?

    I am having the same problem. It started when the month view was not available. It took me a long time to figure out that when I minimize the month view, it shows up on the dock as a teeny tiny icon. When I click it, nothing happens. When I go to Week View then my calendar shows up. NOW though, my week view has disappeared and now I'm only left with DAY view. The same exact thing happens in Week view. I have no window, nothing to "grab" that I can possibly see to get it back on my screen. BUT it will be a teeny tiny icon when it's minimized.
    The only thing I can think of is that I'm a tech teacher using a projector and my laptop changes resolutions with different software programs. I have had iCal open when the resolution has had to change. The only thing I can think of is that somehow that did something to the window and I can't get it back.

  • Can't see some files, even though I know they are there

    This is a strange one.
    A couple of days ago, I began not being able to see most of the folders in my documents folder. I can see some, but not most.
    I know the files are there, because I can access recently used files from the applications like Word and Excel that have a recent files list. And, they are working fine.
    I just can't see the bulk of my folders. I've checked the things that occurred to me on security and sharing, and I don't think I changed anything or added any new software.
    Any guesses? Thanks for your help.
    Mitch Goldstein

    Got my answer. I had moved the files (or someone in my family did), and they were deeply buried in another folder. Thanks.

  • I can not see the videos full screen. The videos are limited to a part of the screen.

    I use sites like dailymotion,com to watch some Indian videos. I can not make it full screen. It shows with black bands on both sides of the screen, showing short images. How can I see it full screen? Thanks

    ahuvay
    What video card/graphics card does your computer use? If NVIDIA GeForce, then that is within 99.999% certainty your issue here.
    There is a known serious issue specifically with Premiere Elements 10 on a computer that uses a NVIDIA GeForce video card/graphics card.
    The answer has been to roll back the driver version to about May 2013. This specific issue has not been reported for Premiere Elements 11, 12, or 13/NVIDIA GeForce.
    Please refer to Announcement on this at the top of this forum. Also, see
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    If your computer is not Windows 8 or 8.1 64 bit, then you should be able to find the older driver at
    NVIDIA Driver Downloads - Advanced Search
    If your computer is Windows 8 or 8.1 64 bit, the fix is not going to be possible since the available NVIDIA GeForce
    driver versions do not go back far enough.
    So, before all else, please determine if this issue applies to you and then we can decide what next if it does not.
    If any questions or need clarification on the above, please do not hesitate to ask.
    Thank you.
    ATR

  • I can not see some parts of web pages, some things are visible others not.

    In my mail program most of everything is viewable but the different styles that are available to use above the body of the message are not able to be seen. I can run my mouse over the different spots in the cell to see what that space is but you cant see it. On some web pages that I shop on all the details are available but the buy now button may be doubled and overlapped or just not visible. If I scroll with my mouse over the open areas I can usually find it but not see it. The screen also looks very bright, I've tried to change the colors to try to get the missing data to show but it's been no help. Oh, even now the button to submit this is not visible and the troubleshoot information box is only visible when scrolling over it. Thanks for any help

    See:
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong

  • Found Solution to 2 months of reboots and non-POST may help others

    This may be a bit of a read but here's my story.
    I've had this Neo Platinum with a a64 2800+ for close to a year now, and 2 months ago was the first of what i thought was "buy a new system" signs. Specs are in sig.
    i've had this machine overclocked 267 HTx3 x9 multiplier 166 mem 3-3-3-8 1T = 2.4GHz All stock voltages since the first week i owned this rig (self built) and only two months ago did these problems start.  I notice the first weird thing about 4 months ago but everythign was running stable so i just pawned it off to nothing, i was cleaning my tower out one day and noticed that the uv reactive blue ATX header in my motherboard was BROWN!.. so i pulled out the header and took a closer look.  The 3.3V (Orange) lines on the top (orientation installed in board) had gotten soo hot they had burned the plastic to a dark brown.. now i thought first off wow that got pretty hot heheh but checked my voltages in core cell and everything seemed fine.
    Ok jump to two months ago.. started having reboots maybe once a week.. gaming usually, that went on for a couple weeks.. then it started every day, then every half day, then every hour etc... it got to the point where it would power on from cold.. and power off a second later.. no bios, no beeps nothin.  So of course i ripped the board, cpu, ram, and psu out of the case and tried it barebones. After a week of fiddling with it.. (tried different ram (known to be memtest stable), psu (enermax 430W) and vid card) to no avail.. so i let it sit for a few days off.. came back and tried it again.. oh looky.. it posted... went into  bios checked some stuff and F10 reboot... no post.. i thought ?! trying to determine if you've got bad ram, psu mobo or cpu without good alternatives to test sucks... heh so i'm thinkin it must be ram.. after a couple hours i thought hey i should see if i get post error beeps with no ram in it.. tried that.. huh... no post.. no beep nothing... reset.. BEEP.. BEEEEEEEEEEEEEEEEEEEEEEEEEEEE (apparently it hung there   so i'm like will it's not a ram problem hahah.. so then i'm thinkin ok it's PSU or CPU or MOBO then. stuck what i had taken out back together (still outside case)
    i cleared CMOS.. oh looky it posted ( i could do this over andover all day.. it would only post after clear cmos) so i'm thinkin.. ok after you clear cmos this board runs at a really slow cpu ram speed just to get goin... so i get into health monitoring.. and looky here... 3.3V reads 2.89V..... that's not right. So i stick in my other original PSU (from sig) and it was a little better 2.98 sometimes touching over 3V.. still not right.
    I eventually got it to work at 200 HTx3 RAM@166 x9 mulitplier.. hey it got me in to play NFSU2 (i refuse to use my celeron 3.6G for that.. chop chop chop)
    this ran for a while.. then same problems came back.. no post no nothin but on off on off.. messed around with it for a bit and suddenly.. bang! everything went like a dream.. so i started slowly taking my settings back to normal.. worked like a dream... went back to my overclocked settings.. worked like a charm.. i'm sittin there not knowing wether to throw the damned thing out the window or cry in happiness it's workin hahah.. all this time my 3.3V was still under 3V in corecell.
    ok time for what i found that really fixed er up.. i went to my buds today (network admin, oh btw i've been a pc tech for 14 years.. and i will NEVER forget this little trick, i'm amazed how much i still learn everyday.. even after 14 years of crap (mostly micro$oft
    So out of the blue he says... hey.. i wonder if that ATX connector got that hot, that maybe the metal has degraded somewhat on those pins in the header... i slapped my forehead and kicked myself in the ass hehe never even crossed my mind.  So we get out the precision screwdrivers and gently give all 4 sides of the 3 pins a good scrape down.  Plug in.. goto system monitor.. BAM!!! 3.2v i was still shaking my head at this point that after 2 months of pissin with this thing that's all it was..
    Figured i'd better make sure.. plug another psu in.. 3.2V i'm like geezus.. SOOOO NOW i'm stuck with wondering.. what the hell made my mobo draw THAT much current that it almost melted the ATX header.. and on the 3.3V rail too.  i wouldn't think that just overclocking would do that.. especially when i'm using default voltages across the board.. for those who are wondering my temps are 35 idle (remember speedfan STOPS my cpu fan) and 52 full prime95 load (fan 100%) CnQ is enabled
    I'd love to see someone from MSI explain all the power issues with this board (keyboard issues, USB issues, Burnt ATX header issues ETC. heh)
    I guess now that my system is runnin like a dream.. i'll have to test my original PSu (aerocool) on my celery and see if the 3.3 rail is pooched or not.
    Thought i might be able to help someone sidestep the grief ... oh the 2 months of grief that i went through
    Any questions on other issues i'm happy to answer as well
    Sig Addition:  I refuse to RMA ANYTHING.. unless it's got blown caps

    Wow nice fix... I dont think I would have ended up finding out what happened, good job

  • Mac can't see wireless network - have checked other posts but no  solution!

    I have scanned many posts on this topic but have not seen my specific problem resolved, so I'm starting a new post. Here's all the facts and things I've checked.
    Hardware Details
    iMac 1.25 GHz G4
    Airport Extreme card (shows up in system profiler)
    Linksys 802.11g router
    Network Details
    WPA Personal
    Have never had a problem using this network. 2 PC's an 2 Macs regularly connect. Right now one PC and my wife's MacBook Pro are using the network.
    The iMac was seeing the network yesterday - today it can't even see it!
    Per the advice from many helpful posters, I have checked that mac addressing is disabled on the router.
    I have checked that appletalk is active on the iMac
    I have restarted the iMac several times after applying various changes.
    This is a very perplexing problem. Any help would be appreciated.

    Hi kmacwilliam,
    I am having a similar issues with yours, my MBP and MB couldnt not stay connect to the dlink router recently. But the PC's been working fine all the time. The wireless would drop and could not see the network again while my neighbours' networks were still displaying. Even restarting the MBP and router wont see my wireless network.
    You can try these things and see if it works for you, it's worked for me for time being. Please post back the outcomes:
    1. Delete any airport-related passwords in the "Keychain" so no airport passwords are stored
    2. Shut down the iMac
    3. Reset the PMU in your case for the G4 iMac, you may need to open your back case to reset it
    3. Turn on your iMac and you should see the network again
    I am suspecting this might be software issue, hope this works for you.

  • Can't see my Firefox window and tabs, but they are somehow open

    Yesterday I had a single Firefox window (with approx. 20 tabs) open, and then the window disappeared. I figured that I'd lost all my tabs.
    When I opened a new window, and attempted to check my Outlook mail, I got the message "There was a problem opening your mailbox. You may have already signed in to Outlook Web App on a different browser tab. If so, close this tab and return to the other tab." I am now hearing a *ding* whenever I get a new email. However, I cannot find the window or tab in which my Outlook is open! It's like the Firefox window is invisible or hiding somewhere.
    If possible, I'd like to locate this invisible Firefox window, and not have to re-locate all the websites I had open in the tabs. I've opened the Windows Task Manager, but it doesn't show any open Firefox applications.
    Any ideas? Where is this open Firefox window hiding?

    Thank you much!

  • How can we update current ins value to match insurance depr area?

    Hello - I need some advice, please.  On an asset that was transferred within a company code, the current insurable value on the insurance tab in master data is showing DOUBLE the insurance value that is showing in the insurance depreciation area.  How can we update the current insurable value to the correct amount?  Thank you for your help.
    Heidi

    Hi,
    As advised above by Bernhard, you should not select COPY check box in the below path.
    SPRO -> FA-> AA-> Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data -> Define Screen Layout for Asset Master Data....
    Here select the screen layout, which is assigned to the questioned asset's asset class and click on LOGICAL FIELD GROUPS.
    Select LFG 08 - Insurance and click on FIELD GROUP RULES.
    For the field groups 62, 64, and 78, you should deselect check box COPY and SAVE.
    Cheers,
    Srinu

  • Firefox is loading slow, as like for Twitter and Facebook is only showing posts that were made 10 to 15 minutes after orginal posting--none posted after are shown.

    This started this afternoon, but I let Firefox take a break--It is still not posting things as soon as it is made.
    For example, I post a status or a tweet, it is not shown on my home page until 10 to 15 minutes later. The same goes for other posting. I look at my @ replies on twitter, it's not even showing today's replies that I know I have, it's actually showing yesterdays.
    I'm not sure what's up, have any idea? Thanks!!

    Are you using Clear Recent History to clear the <i>Cookies</i> when you close Firefox?
    *https://support.mozilla.com/kb/Clear+Recent+History
    That can cause plugin-container processes to appear that Firefox opens to clear cookies from plugins.

  • Can't see DDL of views from other schemas in Developer?

    Hi,
    I've seen elements of this problem in other threads but this problem of course has it's own twist.
    I can see other schema's objects EXCEPT VIEW DDL.
    I have given a user every role and priv that I can and they still can't see the view ddl of another schema. They can see procedures, functions etc. just not the view. I've found that if I use the user that created the users I can see the DDL of all subordinate users. Users created under that schema can not see each others views no matter what rights are given. Interestingly enough sometimes when I look to display view DDL it will flash the DDL briefly before blanking the screen. very frustrating. All the Toad fanboys are crowing about how they couldn't possibly use a tool that doesn't allow them to see other view source.
    I have also looked for settings in the preferences but could find none.
    Is this a bug? It seems like one to me.
    Any help is greatly appreciated.
    Thanks
    Mark

    We have a bug logged for this.
    Sue

  • Navigational toolbar I can't see although it is opted

    Yesterday I added some add-ons. Today I can't see the navigational toolbar. The add-ons are: Reminder Fox, Xmarks, Tab History Menu, Tab Groups Manager, Facebook Chat History Manager, Reload non-pinned tabs.
    Tanks a lot!

    Hi Gremeka,
    Please let me know which OS you are using. After downloading did you install the trial?
    You need to run the downloaded file to start the installation.

Maybe you are looking for