Can't see my 6602 or 6014 in MAX DAQmx devices.
Hi
I have a 6602 Counter Timer and a 6014 in my computer and I have recently installed version 8.5 of NIDAQmx together with version 4.2 of MAX. Now I can't see either device in MAX. I am correct in thinking these devices are not supported by NIDAQmx? Will I need to install the traditional NIDAQ drivers and use them? I am hoping to write some software in C# (Visual Studio.NET 2005) to setup and use the devices.
Kind regards
Jamie
Hi Jamie,
The PCI/PXI 6602 and PCI/PXI 6014 are supported by DAQmx 8.5 as mentioned here:
http://www.ni.com/support/daq/versions_pci_pxi.htm
You should not need to install the traditional DAQ drivers as well. Did Windows detect the cards when you restarted the computer after installing DAQmx? You can check from Device Manager to see if the cards are detected and installed (should be under Data Acquisition Devices). If they aren't there, then they won't show up in MAX. You can try removing the cards or replacing them in different PCI slots and see if they are detected then.
If they are installed in Device Manager, it could be a corrupted MAX database problem. You can fix that by deleting the <National Instruments folder>\MAX\Data folder and restarting the computer. Make a backup of that folder somewhere just in case.
Let me know if that works!
Way S.
NI UK Applications Engineer
Similar Messages
-
Can't see tabs from my PC on my Android device after syncing
Despite pairing my android device and pc and updating my firefox sync I am still unable to view the opened tabs from my PC on my Android device.
Can you please tell me how to see all my current open tabs that are on my PC, and view them on my Android device? Isn't that what sync is supposed to do?
ThanksHere is what I am seeing on my Android device - at the top, a few options like History > Top Sites> Bookmarks>Reading List. Then, the search/address bar, then to the right of that, a square with the number "1" inside it, then 3 dots that, when chosen, give you the following options:
New Tab
New Private Tab
Request Desktop Site
Tools
Settings
Any thoughts on how I specifically sync my Desktop open tabs to my Android device so I can then see all my desktop open tabs on my phone?
Thanks! -
CFP 1808 can not see software option under tree in MAX
I have configured the cFP 1808 with the correct IP address so that it is recognized by the laptop but when I expand the tree under the Field Point there is no options under it. I need to install Real-Time software but obviously can't if the option is not given to me.
The cFP-180x are just distributed I/O interfaces for ethernet or RS-232. The do not have an on-board host processor to execute an operating system like RT.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
Using my iPad that I bought last month, new Apple TV, I have set up Apple TV and in settings turned AirPlay on. Going back to my iPad the AirPlay symbol is no where to be found, it is not at the bottom of the screen when I press the home button twice and swipe twice, and neither is it displayed if I select video or music. Any ideas greatly appreciated.
ChrisThanks, I read several other threads and all it took was to turn off the router and turn it back on again, 'simples'.
Thanks
Chris -
itunes no longer sees my devices. But I can still see them in windows. Please help
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
HT5372 I can't see my shared tabs
I can't see my shared tabs. I have 3 devices: iMac, iPhone, iPad mini - i see shared tabs of iMac on iPhone and iPad, but i can't see my shared tabs between iPhone and iPad.
iCloud: Using and troubleshooting iCloud Tabs
http://support.apple.com/kb/HT5372
This topic didn't helpThe Safari tabs feature with iCloud will not be available until iOS 6 is available for iPhone.
-
Can't see the entire devices window
I have the latest version of iTunes. If I go to preferences, then Devices or Advanced, I can't see the entire window. For example, in Devices, the first check box and the letters Dev are not visable, and appear to be to the left of the left edge of the window. I can't check the check box!
Thanks, DISYou MAY have a corrupted preferences file
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
-except delete file in P6 http://forums.adobe.com/message/4644893
-and setting http://forums.adobe.com/thread/1058426?tstart=0 -
I can't see the eBooks i purchased
I have authorized my Kobo Glo device with Adobe Digital Editions, and my Kobo ereader does show up under devices, however I can't see the books I purchased directly on the device. Am I able to move books from the Kobo glo onto my computer?
Satellite C655-S5140
I formated it with Windows 7 Ultimate!
Not sure what your problem is, Victor.
Windows 7 Home Premium already contains Windows 7 Ultimate. You should unlock the new features this way.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
It takes only minutes. Drivers and utilities are undisturbed.
-Jerry -
i just updated my iphone to ios5 now when i go to music it says 'no content' when i checked my capacity it shows 7.9gb in 'other' . i can also see all my music and apps on the device menue in itunes.
I went to the Summary page of iTunes and checked "Sync only checked songs and videos". Synced again, and no songs were playable. Unchecked my only playlist and synced again. All the songs were gone as expected. Checked my playlist again, and all the songs were there. Looked at them under the music tab, but they were all grayed out. Tried to play any of them, but could not. Tried to sync again and received the message, "The iPhone could not be synced because the sync session failed to start."
Every time I connect my iPhone 4 to iTunes, it says "iTunes was interrupted while restoring the contents of the iPhone ____. Would you like to restore this iPhone again now?" I click "Continue Restore" (I'm tempted to click "delete backup.) It then says, "An error occurred while restoring this iPhone (-54). I click OK. I'm redirected to the "Set up your iPhone screen". It's already selected to "Restore from backup of ___'s iPhone". Click continue. It restores for about 2 minutes. iTunes says my settings have been restored and wait for it to restart. And again the message that "iTunes was interrupted..." (see above). Crap.
How do i get this back to where it belongs? -
Time capsule appeared on Finder on both "shared" and "device". now i can't see it on devices
time capsule appeared on Finder on both "shared" and "device".now i can't see it on devices
It will only appear in devices if you mount the drive. This should happen automatically when Time Machine starts.. but you can manually mount the share by just clicking it.
-
when i conect my ipod tyouch on pc
my pc can not see itStart here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
How can I see Calendar event END times at a glance?
How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback -
Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS
I am looking in this table with SQLPlus and TOAD and can not see any rows.
Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else? -
Can not see historical data in Time Machine backup
Hi folks
First my setup:
MBP Late2012
Samsung Evo 840 SSD
external USB 3.0 1TB as TimeMachine HD
Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
StoikerHi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.
Maybe you are looking for
-
HT204053 2 Itunes Accounts - How do i merge them?
I somehow have 2 itunes accounts. An icloud account on my phone, And on my laptop a normal itunes account. I have made purchases on both. Can i somehow merge these? Or delete one and keep the other without losing everything?
-
When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.
-
Flash player work with Safari, but not with Internet Explorer
My flash player had a problem so I uninstalled it. I had a problem downloading the player with Internet Explorer, so I successfully download it with Safari. The player works fine with Safari, but I cannot get it to work with Internet Explorer 8. I
-
Documents to go was not downloaded to my phone with 4.5 system update ?
Documents to go was not downloaded to my phone with 4.5 system update ? Therefore i cannot upgrade to enble me to edit word documents as promised in the download blurb. My phone is blackberry 8310 software v4.5.0.55 (just downloaded) Message Edited
-
Custom seach help for standard field in Web dynpro application
Hi All, I have a requirement in SRM portal where in I have a to add a custom search help to the 'WBS_ELEMENT' field in the the 'ACCOUNT ASSIGNMENT' tab of the Shopping cart creation screen with some input parameters on the search help. As the SRM Sho