Can't "see" my Ext HD

Not sure what I did but my external HD doesn't show on the desktop or in finder. Have rebooted several time. Disconnected and reconnected.
Kinda weird. Tips?
TIA

Ron
AND IT"S BACK!!! Rons Book.
Well, good for youit!
BTW, I don't know what problem you were having with the script, and it's not worth following up now, but in future, since you have a space in your volume name, you need to put it in double quotes, thus: "Rons Book". Maybe that was the cause.

Similar Messages

My BT shows an old account - and can't see "My Ext...

Hi community members.
I have just returned to BT after previously having using them for telephone until Oct 2012. I had a separate broadband provider. Now I have gone back to BT and ordered Infinity.
As a first step, my phone account was changed over. The Infinity order went through separately.
I got an email relating to Infinity telling me that I need to sign in using "the email address that I had provided with the order". It so happened that this was also the email address I used when I previously had an account with BT, so I used it and it was recognised (after a password reset).
So now my phone and broadband are working, but when I go to the My BT page, it shows the details of my account as at October last year, and some error message which prevent me going to the "My Extras" page as below.
I tried live chat for help but they just said that it is a "website problem" and to wait 48 hours. Has anyone else experienced this and if so, did it fix itself?
thanks
Due to a system error we can't display your product information. We are working to fix this for you as quickly as possible.
If you need access to the broadband usage tool in the mean time, you can access the page through this link:
Go to the Broadband usage tool >
My Extras
We can’t retrieve your Extras, either because you have a calling plan or a broadband service in this account or because you are not the account holder. Please let us know if you do have a calling plan or broadband service in this account and you are th..., so we can amend your profile.

Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3/5 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Can't see Ext Drives

I had to force quit the finder and upon restart I couldn't see the ext drives on the desktop. They do not show on Disk Util. either. Tried disconnecting and powering down, but no lock. Both drives seem to be working fine.
Joe

Try unplugging all USB devices, then unplug the power cord from your computer for 15 seconds.
[USB and FireWire Quick Assist|http://support.apple.com/kb/HT1151?viewlocale=en_US]
[Common fixes for USB device issues (unrecognized, etc.)|http://www.macfixit.com/article.php?story=20070824012114701]
[What to do if your computer won't recognize a FireWire or USB device|http://support.apple.com/kb/HT1317?viewlocale=en_US]

ITunes can't see external writer

Hello everyone..
I have a Mac mini with a broken CD/DVD writer. So I use an external one - but iTunes doesn't see it and tells me to insert a CD [when I already have] so that I can burn a music CD from an mp3 file.
I guess it's internal wiring isn't set up to do it this way...
I downloaded a prog called MediaHuman Audio Converter, as it said it could do the job.
But when I set it up it doesn't seem to have a format for CD audio format [unless it's one of these: AAC, AC-3, AIFF, ALAC, FLAC, OGG, WAV, WMA].
Is there anyone smarter than me out there [not hard....] who can assist please??
Thanks
John
[also posted this in iTunes section]

I managed to work out why iTunes couldn't see the ext writer [I didn't check it in the drop down menu...]
So, although I didn't manage to get AIFF files written to the disc to work on my CD player... the situation is now resolved.

Can't see my iPhone in iTunes since IOS8 update

Updated to IOS 8 without a hitch with both my iPhone 5 and iPad mini, but now I can't see them in iTunes.
Any ideas?

Get a e-mail from Apple Senior Advisor today said about wifi sync issue.
Hi, Roy
This appears to be an issue that we are currently working on. I appreciate you reaching back out to me to update me. I will continue to monitor what happens moving forward and relay any new information from our engineers as it comes. Thank you for your patience, but at this time we do not have an immediate fix.
Sincerely,
David Graham
Senior Advisor
 Apple
-P.S. if you need to contact me about your case.
CALL: (877) 416-4271 ext 1114079
EMAIL: [email protected]
HOURS: 9AM - 6PM EST Sun - Thurs

External table, can't see the file

Hi
--This is what I do
CREATE OR REPLACE DIRECTORY data_dir AS 'C:\TEMP\'
GRANT READ, WRITE ON DIRECTORY data_dir TO my_user;
--I have my actual GAS.TXT file in the folder, the file looks like this
0003450305NG-5E6, TUSCANY VILLAS,26 FENTON STREET ROTORUA 3201, ROTORUA
002343043NG-9DE, LORALIS LIMITED,18 HARINGTON STREET TAURANGA 3001, TAURANGA
...etc...
--I do a select
SELECT * FROM all_directories
--and it shows
SYS DATA_DIR C:\TEMP\
--Then I create my ext table like this
CREATE TABLE external_table(
ICP CHAR(10) ,
NAME CHAR(20),
ADDRESS CHAR(30),
CITY CHAR(20)
ORGANIZATION EXTERNAL
( TYPE oracle_loader
DEFAULT DIRECTORY DATA_DIR
ACCESS parameters
(RECORDS DELIMITED BY NEWLINE
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"' AND '"'
(ICP CHAR(40),
NAME CHAR(100),
ADDRESS CHAR(100),
CITY CHAR(100)
location (DATA_DIR:'GAS.TXT')
--The table is created
--then when I try and do a select I end up with an error message
SELECT * FROM EXTERNAL_TABLE
ORA-29913 blah, blah
ORA-29400 blah blah
KUP-04040 file can't be found
ORA-06512 SYS.ORACL_LOADER
ORA-06512 blah blah
So, I reckon of some reason it can't see the file, but I do not know why?
The file sits on the Server in the C:\TEMP folder and the error log ends up in the C:\TEMP folder
I have tried several variations on this, but still same error. However, then I also tried these exact same scripts on another Oracle box, and it worked fine. So something with the machine/box I am using is not alright.
Would appreciate your thoguhts.
Thanks
Kari

As suggested, change your table definition to match the available data, and post an example like below with complete error message (not the edited version that is hard to understand).
SQL> $ type c:\temp\gas.txt
0003450305NG-5E6, TUSCANY VILLAS,26 FENTON STREET ROTORUA 3201, ROTORUA
002343043NG-9DE, LORALIS LIMITED,18 HARINGTON STREET TAURANGA 3001, TAURANGA
SQL> CREATE OR REPLACE DIRECTORY data_dir AS 'C:\TEMP\'
2 /
Directory created.
SQL> CREATE TABLE external_table(
2 ICP CHAR(16) ,
3 NAME CHAR(20),
4 ADDRESS CHAR(35),
5 CITY CHAR(20)
6 )
7 ORGANIZATION EXTERNAL
8 ( TYPE oracle_loader
9 DEFAULT DIRECTORY DATA_DIR
10 ACCESS parameters
11 (RECORDS DELIMITED BY NEWLINE
12 FIELDS TERMINATED BY ','
13 OPTIONALLY ENCLOSED BY '"' AND '"'
14 (ICP CHAR(40),
15 NAME CHAR(100),
16 ADDRESS CHAR(100),
17 CITY CHAR(100)
18 )
19 )
20 location (DATA_DIR:'GAS.TXT')
21 )
22 reject limit unlimited
23 /
Table created.
SQL> select * from external_table ;
ICP              NAME                 ADDRESS
CITY
0003450305NG-5E6 TUSCANY VILLAS       26 FENTON STREET ROTORUA 3201
ROTORUA
002343043NG-9DE LORALIS LIMITED      18 HARINGTON STREET TAURANGA 3001
TAURANGA
2 rows selected.
SQL>Message was edited by:
Kamal Kishore

Can't See External Hard Drive

I have just bought a Pleiades USB/LAN External Storage Enclosure and put a G2-lan Seagate 200gb hard drive in it. I’ve connected it through via USB and network cable (not at the same time) and I’m pulling my hair out cos I have no freakin idea how it works.
The network cable seamed to complicated by my pathetic excuse for a brain so I’m trying to connect it via USB and even that simple task seams too much for me. My manual says “Turn your computer on and start Mac OS X, connect the Pleiades and turn it on, no river installation is required, the external drive will mount and show up on your desktop”. Pitty it didn’t. I noted the footnote “For factory new drivers and formatting, see “Partitioning and Formatting” So I go there: “Select “Disk Utility” in the utilities folder. Chose your external drive and create a FAT32 partition”. Would be good, if my external drive showed up in the list. Then there is a side note that says “If you can not see the drive, make sure the settings of your hard drive are correct, there are no extension conflicts and the power is turned on”. The power is turned on, but I have no idea how to see the settings on the hard drive let alone know what they should be.
And that’s my conundrum. Help please.

Hello! A couple of things. First pull the drive and check the jumpers to see if it's jumpered as "master". The cable select position won't work on an ext case. Was the drive new or pulled from another computer? It could be set to the "slave" jumper and again would need to be changed to "master". The jumper settings are usually noted on the drive but you might have to go the the Manf. site to find them. Once your sure the drive is set to master plug the usb connector in and turn it on and see if it either pops up on the desktop or gives you the "do you want to initialize" window. Post back with your results. Tom

Have AirPort Utility ver 6.1. Can't see printers or external hard drives. I could in earlier version. What gives?

With Airport Utility ver 6.1 can't see printers or hard drives. Dont' even see where to go for those screens. Was much easier in earlier versions. Question: How do I setup ext hard drives and printers in ver 6.1?

You don't need to "see" the printer for it to operate correctly using AirPort Utilty 6.1. If the printer was previously installed, it should continue to operate correctly. If you have a new printer, just install the device according to the manufacturers's instructions.
As far as being able to "see" a disk in AirPort Utility 6.1. Try the following:
Open AirPort Utility, click on the AirPort device, then click Edit in the next box that appears.
Click the Disks tab at the top of the setup window.

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

Can not see historical data in Time Machine backup

Hi folks
First my setup:
   MBP Late2012
   Samsung Evo 840 SSD
   external USB 3.0 1TB as TimeMachine HD
   Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
      Stoiker

Hi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
Regards
TD

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Can't "see" my Ext HD

Similar Messages

Maybe you are looking for