Can't see my header file in the Solution Explorer?

Hi,
I am new to VS and I am working on a school team project where we use a git repository and when I created a header file I commit it, see it in the folder where I have it stored on my system and on github, but I don't see it in my Solution
Explorer in VS. I have used the properties->VC++->include directories and set the path but I still don't see it?
Any ideas is much appreciated!
Thanks

Hi pvdg42,
That's a great question. I have opened an .sln file because when I try to open a source control project I don't see the .vcxproj file and when I go into the git folder to open the .vcxproject a blank VS window opens. There is another file .vcxproj and when
I try to open that one it says modifying this may damage your system.

Similar Messages

  • How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

    How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
    It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

    Jayhawk
    I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
    Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
    ATR

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Can't see certain music files in the music library

    I have recently imported some CD's and can see the files in the correct location in the C drive, however I cannot see them in the itunes music library. The file names are identical to others that I can see.

    gordonroof wrote:
    they open in itunes and play. surely i don't have to treat every track this way.
    No, that was just to confirm that they don't have an incompatibility, and they passed the test.
    gordonroof wrote:
    is there a short cut?
    If you know where they are, just drag the whole folder into the main iTunes window (or use File > Add Folder to Library) and they should all add.
    To the original problem, were these tracks imported by iTunes from audio CD?

  • When i add a background image to form and it gives me such kind of issues so i have deleted the resource file in the solution explorer and then when i reopened my projectt it again gives errors of missing root element of InvalidResx.file amd of XMl.

    I have already go to properties then resources and try to remove resource option but it was't working.so help me by giving another technique to solve this issue.

    I have already go to properties then resources and try to remove resource option but it was't working.so help me by giving another technique to solve this issue.
    Hello,
    It will be more specific if you could share the screenshot of that error with us.
    In addition, if this issue is mainly related to the BackGroundimage property, you could consider using the following suggestion.
    We could click our project to expand the nodes and click "InitializeComponent()" to navigate to its desiginer code.
    Then check whether there is a line which has " Me.BackgroundImage =", remove that line and then remove the resource file with the following step.
    Project property->Resources->Switch "Files" or "Images" to see where you have setted for that image file, find it and remove it.
    Then save all your changes to see whether it's OK.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why can I see my .swf file in the folder on the web hosting server but it doesn't display on the page?

    Go to www.handstool.net, go to "products" tab in menu bar, "clamshells" link in sub-menu.

    That's strange.
    When I view source directly from your page via the URL you provided even I don't see it.
    But when I do a Save As your page and open the html I see following part in your code..look at the part in red (this is not in view source though):
    <style type="text/css">
    <!--
    a:link {
        color: #333;
    a:visited {
        color: #333;
    a:hover {
        color: #333;
    a:active {
        color: #333;
    -->
    </style><style media="screen" type="text/css">#FlashID {visibility:hidden}</style></head><body class="twoColFixRtHdr">
    <div id="container">
      <div id="header">
      <!-- end #header -->
      <img src="clamshells_files/logoClamshells.gif" alt="H&amp;S Tool Clamshells" width="250" height="180">
      <object style="visibility: visible;" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" class="headeranim
    Strange...very strange.
    Regards
    Vinay

  • I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

    i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

    You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
    Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

  • I can't see music/video files from my iPad2 or Nano on my Phillips home theatre. Do I need to covert the files?

    I can't see music/video files from my iPad2 or Nano on my Phillips home theatre. Do I need to covert the files?

    The problem is I can no longer back up my photo and video files taken on my phone, saved to my mac, by copying them and saving them on a USB stick or other external hard drive.
    Select the photos and videos in Photos and use the command "File > Export"  and select a folder on your USB stick to save the photos to.

  • Is possible see a pdf file without the buttons of the program adobe? don´t permit a copy of the file

    Is possible see a pdf file without the buttons of the program adobe? don´t permit a copy of the file

    For the hiding, go to the document properties under initial view. You may confuse some folks if there is no file menu to close the file (a lot of folks just can't get the keyboard shortcut, alt-F4, into their head. They are going to look for where to find the file menu to close.

  • Can't see who has replied to the thread in the forum, its pointess?

    What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
    Surely before you release such garbage you test for these very simple issues, right?
    osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

    It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
    Latest reply: May 3, 2014 2:17 AM by . osgood_
    The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
    9 minutes ago in Dreamweaver support forum
    Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
    If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
    And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
    Plenty of teething issue you need to get your head around over the next few weeks.

  • 2009 MBP can't see internal hard drive - for the second time!

    Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
    The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
    Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
    My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
    Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
    Thanks for any feedback!

    Hi
    I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
    broadband.vodafone.ie/download/files/storage_mac.pdf
    Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
    I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
    Cheers
    Topes

  • How can I see that a file has been sent for workflow?

    How can I see that a file has been sent for workflow?
    During the workflow phase, the file is locked for workflow. But when the file has been approved (or denied) it will have the same status as it did before the workflow process (unless you trigger the workflow by changing its location).
    You can see the workflow history in the "My Request" view, but this way of determining whether a file has been approved seems complicated.
    Best regards
    Magnus

    Hi,
    Thanks for the transaction code, but my question is not answered yet.
    For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
    I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
    STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
    Thanks again,
    Julien

  • Why can i see only one picture in the illustration windows with iTunes 10.5.1?

    why can i see only one picture in the illustration windows since iTunes 10.5.1?

    Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
    I've developed a quick workaround, and am still hoping Apple will fix this!
    Go To Get Info on the tune you want to see secondary artwork for.
    Go To the Artwork tab
    Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
    you end up with a lot of jpgs on the desktop to discard!

  • Project Manager can´t see my .lso files

    Hello logicusers, I am new at the forum and this is my first trouble: Project Manager can´t see my .lso files. I would like to start using PM but it seems to be difficult without seeing .lso files in the navigator window.
    I´ve read the books, I´ve checked here for this tip and got a lot of useful information, but no solution found. I hope somebody could help me please:
    - Macbook white with LP 7.2.3
    - Reinstalled and cleaned all
    - Installed OSX upgrade 0.4.9 manually
    - Installed pro application support 3.1
    - PM Data and logic preferences deleted
    - permissions applied to "all enclosed folders"
    - Performed a complete scan in PM
    If I create a new song from logic, PM can´t see this .lso file.
    If I scan a external hard drive (lacie f.a.porsche) through PM, it only recognizes one .lso file from a lot of old songs, and I don´t imagine why.
    Yesterday I tried this: opened PM, copied a Template song from the Templates folder to the Desktop; renamed it as "Sidload" (my particular "Autoload" term); until here, everything correct, PM seems to be able to manage "Sidload". But when I open Sidload and save the first change, and .bak folder comes, I can´t make more "visible copies for PM" of this file. Finder can see the new copies, but PM not (files that has created "itself"); so I can´t manage a song that has been copied, renamed and saved for first time -through PM, from a Template; invisible, dissapears. No saving PM data, no checking folder, no advanced search helps.
    I wish to have a way to talk to logic support via mail, but I don´t know how. So I came here to beg you friends for your help. Thank you very much for being here.

    yep, I have scanned at every level, from everything to just a single folder that contains song files. After scanning a folder that conatins songs on my SATA B drive (the one that PM can't find songs), still the songs will not appear.
    I have copied over my songs to the drive that PM seems to see songs on and guess what? It doesn't see those songs copied over.
    This is driving me so nuts I have forgotten that I engaged in this thread...
    http://discussions.apple.com/thread.jspa?threadID=1046126&tstart=0
    Does anyone know what the option in the PM's file menu "import file maps" and delete all exported file maps" does? Or what its for?
    It feels to me that some sort of database or referrence list etc etc has gone very wrong, but I have already tried deleting (manually) the PM data file in somewhere in the library folder etc etc.
    Using file buddy I see that PM stores the a PM database as an invisable file on each drive you have connected. Presumably info for what is on that drive. Perhaps these invisable files need to be manually deleted???
    Message was edited by Thomas O'Carroll because this forum doesn't work properly

  • Can''t see inbox.mbox file in user library

    For some reason, I can't see a .mbox file for my inbox when I look in my user library Mail folder. I can see a junk.mbox; I can see a deleted messages.mbox, but no inbox.mbox (or sent.mbox, for that matter). Can someone tell me where those messages live in the library? They must be somewhere, but I can't seem to find them. I am about to migrate to a new Mac Pro, and want to make sure everything gets to the new machine. I am currently using my laptop as my main machine, because my aging dual-867 mhz. MDD machine is nursing a dying hard drive, and nothing has been able to repair it, so I stopped using it. Of course, I still have a lot of mail on the old machine, and I wanted to archive the inbox contents to a .mbox file that I could import to the new computer. Are these mailboxes different from other mail folders? Thanks for any help.

    Hi and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Maybe you are looking for