Can't see my itunes window

I am having trouble opening up the itunes window. I can hear the music and the itunes bar appears on top of the screen but the window does not appear no matter what i try. I tried downloading itunes again but it still does not work. Please help me!

Hi Markie,
It's not in the top window now, it's in the main section. When you plug your iPod in click on it and at the bottom of the window the Capacity pole changes as it adds stuff.
Is that what you're looking for?
Regards,
Colin R.

Similar Messages

TS1369 itunes no longer sees my devices. But I can still see them in windows. Please help

itunes no longer sees my devices. But I can still see them in windows. Please help

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?

I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

Can't see my layout-window anymore

Hello everybody,
I have a problem!
I opened a domain in iWeb but now I don't see the layout-window anymore, even if I open a other domain.
There is just the navigation-bar on the top starting with "iWeb ..."
I have to do some changes, please help me.
Thank you.

Viewing this thread, at right you'll see a section: "More Like This" containing a thread entitled: "I can not see my iweb window anymore???". Click on it and see if the suggestions in that thread help.

How can I recover my Itunes Windows?...I download Mac version by mistake and all my format changes

How can I recover my Itunes Windows?...I download Mac version by mistake and all my format changes

Hello,
[PhoneView|http://ecamm.com/mac/phoneview> will do that and more

I can't see the EXS window

I'm trying to create a sampler instrument in Logic Pro 9 complete installation.
I start a project with a software instrument and select the EXS24 as Input... But I can't see the EXS window. All the instructions I have found so far tell me the next step is to click Edit in the top left of the EXS window... but I can't see how to make it appear.
Thanks for your help...

Rob Cumberland wrote:
All the instructions I have found so far tell me the next step is to click Edit in the top left of the EXS window...
Hi
Try the "other left":
CCT

Hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

hey, how can i see in itunes 10 only the songs that are not part of a playlist on my ipod?

Running a presentation via VGA out with Firefox/Safari open. When I hit 'esc' to come out of slideshow, monitor stated resolution too low. Now Safari and Firefox browsers are still open, but I can't see the browser window on either. Ideas?

Running a presentation via VGA out with Firefox/Safari open. When I hit 'esc' to come out of slideshow, monitor stated resolution too low. Now Safari and Firefox browsers are still open, but I can't see the browser window on either. Ideas?

If you use Lion, go to Applications/ Mission Control and, if you have more Desktops, as attached, it means you have more, and you must select the one you need for a certain app. If default settings has not changed, this is Control with left / right arrow
If in Snow Leopard and earlier, you have these settings in System Preferences only. In Lion, you also have some settings in Sys Prefs.

Can't see library itunes in iphoto after Yosemite upgrade

I can't see my itunes library in iphoto following upgrade to Yosemite. I can't use my music in iphoto slideshows.

In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out.

IPod shuffle 2nd Gen....Can not see in iTunes or Windows

Bought two iPods,one a Nano works fine the other a shuffle does not.
I can not see it in either iTunes or Windows,it does appear to be charging via the USB Port (Lights Blinking etc) but nothing else.
As I can not see it in iTunes I can not reformat or do any of the other fixes sugested by Apple.
Now silly me I bought the items secondhand but unused so cant take this back to shop!
Help,its really teeing me off!
Thanks!

Bought two iPods,one a Nano works fine the other a
shuffle does not.
I hope you're not connecting them to your computer
simultaneously ... if so, connect one at a time.
No connecting one at a time.
I can not see it in either iTunes or Windows,it
does
appear to be charging via the USB Port (Lights
Blinking etc) but nothing else.
WHICH lights are blinking? The only normally
blinking light should be orange...showing that it's
in data mode AND that Windows recognizes it
(assuming, again, that you haven't connected both
iPods at the same time).
It should show up in the system tray...
Orange light flashes,does not appear in systems tray or in My Computer.
As I can not see it in iTunes I can not reformat
or
do any of the other fixes sugested by Apple.
Now silly me I bought the items secondhand but
unused
so cant take this back to shop!
Help,its really teeing me off!
Thanks!
Answer the questions I posed, then we'll move on...
Thanks for the reply !
Windows XP

How can I see my iTunes library on my iPad

How do I see my iTunes library on my iPad?
I am in the same network but cannot find my songs in my library on my home computer.

settings > iPod > home sharing. when you open the iPod app, there will be an additional entry "library" on the top left of the window (just below the volume slider) from where you can select your Mac's iTunes library.
note that you can use the videos app to view videos.

Can't see shares between Windows XP PCs and iMac

I have an Intel iMac running 10.4.9. I have 2 Windows XP-based PCs. One Windows PC and the iMac are connected wirelessly. The other Windows PC is on wired Ethernet. On both the Windows PCs and iMac the firewalls are disabled. The machines are on the same IP subnet (192.168.2.x)
Windows file sharing is turned on via the Mac's System Preferences. In addition, I've created an SMB share to another volume using SharePoints. I also set the SMB workgroup of the of the machines to a common name. Likewise, I have shared directories on both Windows PCs.
My problem is that I can't access the shares on the iMac from the Windows PCs and vice versa. The Windows PCs can see each others' shares.
One thing I've noticed is that I can't ping the iMac from a Windows PC, but I'm not sure if that service is normally running on the iMac. I can ping both of the Windows PCs from the iMac. I can see the computername of the iMac in the Windows Network list of workgroup computers, but when I click on it, I get a message that it's not accessible and that the network path was not found. I don't see the Windows PC's workgroup in the Mac's Network browser via the Finder at all. I also can't connect using the "Connect to Server command" and directly entering the IP address as "smb://192.168.2.2/sharename" I just get the "Connecting..." window and the candycane progress bar indefinitely.
This all worked at one point with a previous router, but I didn't use any sharing for a month or two and switched routers. But basically the network's config is the same.
Any ideas how to get sharing working in either direction?
Thanks,
Judd
Message was edited by: jvolino
Message was edited by: jvolino

Well I've double checked and under the Sharing preference, if I click on the Firewall option (tab), it says "Firewall Off" with a "Start" button below it. I also tried turning it on (with the various services that I want to enable checked in the list below it) and turning it back off. Same result: I can see the iMac in the Windows network neighborhood (and the iMac's iTunes shared library name in iTunes) but if I try to access the share or the iTunes library, the Windows PC fails to connect.
Is there some command I can issue in Terminal to better see what state the firewall is in?
Yes, I have a wireless router, through which the Windows PC and iMac are connecting.
Thanks,
Judd

Can only see desktop background & windows are blank

My computer (a G4 MDD) is not starting up properly. It will start up but icons, the dock, and text in the menu bar will not appear. It appears the computer works. I had an alert pop up which only appeared as a white window box. I couldn't read it. I only knew what it said because I previously had set up for alerts to be read by the computer. I was able to hit enter and the window went away. Looks like I strictly can not see anything on the computer. I can't find any info on this anywhere. Hope someone can help! (Also, this happened after the computer was forced off during a software update -- of what, I'm not 100% since I wasn't there but I believe it was at least iTunes and a Security Update.)

Hi,
Thank you for posting in Windows Server Forum.
Firstly please update the driver and in addition you can try below registry workaround.
To do this, change the value of the following registry subkeys to 3 (Manual) or 4 (Disabled)：
•HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\cdrom
Name: Start
Type : REG_DWORD
Data: 3 or 4
•HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\parport
Name: Start
Type : REG_DWORD
Data: 3 or 4
Note: If the above registry is changed to 4 (Disabled), the related device is not usable because a driver used in the device is not loaded. Therefore, if the device will be used in the future, the above registry should be set as 3 (Manual).
More information.
1.KB 933757
2. Event ID 7026 — Basic Service Control Manager Operations
Hope it helps!
Thanks.
Dharmesh Solanki

Mac can't see some shared Windows subfolders

I'm trying to copy all my pics and music from my old PC (running XP) to a new iMac. I shared both the My Music and My Pictures folders on the PC, and the iMac can see and access both folders. However, the Mac cannot see all the subfolders within those shared folders:
1. The iMac missed (seemingly randomly) 31 of 871 subfolders in My Music while I was using the Add to Library function in iTunes. It tried accessing the missing shared subfolders directly via Finder, and could not see them on the Mac.
2. The iMac cannot see any of the 20 subfolders or 10 files in My Pictures.
All of the share settings on the two shared folders are identical. And there's nothing unique about any of the invisible subfolders within the PC's My Music folder - they just can't been seen on the Mac. I have 3 other PCs on the network that can all see all the shared folders.
Any help would be greatly appreciated. Thanks!

On a whim, I tried enabling Simple File Sharing on the Windows PC (I had been setting up everything manually, so I could customize access, etc.), and this did the trick. I must have set something up that my Mac didn't like, but I'm not sure what it was...
You can do this by opening My Computer, then Tools >> Folder Options >> View >> Advanced Settings >> Use Simple File Sharing.

After installing Lion os I cannot see my desktop 1 nor can I see my open windows when I go to finder, I just get the grey/black background that comes with mission control. Any ideas as to how to solve this problem?

The top picture is what my Desktop 1 looks like. And the picture below is what my desktop looks like after clicking mission control. Ive tried changing wallpapers, changing preferences, etc. and I still can't figure out what's wrong. As you can see, on mission control you can't see any of the open windows, or anything that I have placed on my desktop. Any ideas as to how to solve this issue?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Can't see my itunes window

Similar Messages

Maybe you are looking for