Can't see my layout-window anymore

Hello everybody,
I have a problem!
I opened a domain in iWeb but now I don't see the layout-window anymore, even if I open a other domain.
There is just the navigation-bar on the top starting with "iWeb ..."
I have to do some changes, please help me.
Thank you.

Viewing this thread, at right you'll see a section: "More Like This" containing a thread entitled: "I can not see my iweb window anymore???". Click on it and see if the suggestions in that thread help.

Similar Messages

  • I use aperture 3 since a long time. Using slit viewer, now the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How ca

    I use aperture 3 since a long time. Using slit viewer, noe the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How can I splve this problem?

    This lloks like your preferences file might have become corrupted.
    you probably have a problem with corrupted user preferences.
    Remove the Preferences: Remove the Aperture's user preferences from the User Library as described here:
    Aperture 3: Troubleshooting Basics   http://support.apple.com/kb/HT3805
    Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
    Quit Aperture, if it is running. Log off and on again.
    Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
    In the widow that will open, scroll down to "Preferences"
    From the "Preferences" folder  remove "com.apple.Aperture.plist".
    Then try to launch Aperture again.
    But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
    Regards
    Léonie

  • In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

    in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
    Downloaded much and now can not see how to fix it?

    I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
    So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
    Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

  • TS1369 itunes no longer sees my devices. But I can still see them in windows. Please help

    itunes no longer sees my devices. But I can still see them in windows. Please help

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with               
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • I can't see the EXS window

    I'm trying to create a sampler instrument in Logic Pro 9 complete installation.
    I start a project with a software instrument and select the EXS24 as Input... But I can't see the EXS window. All the instructions I have found so far tell me the next step is to click Edit in the top left of the EXS window... but I can't see how to make it appear.
    Thanks for your help...

    Rob Cumberland wrote:
    All the instructions I have found so far tell me the next step is to click Edit in the top left of the EXS window...
    Hi
    Try the "other left":
    CCT

  • Running a presentation via VGA out with Firefox/Safari open. When I hit 'esc' to come out of slideshow, monitor stated resolution too low. Now Safari and Firefox browsers are still open, but I can't see the browser window on either. Ideas?

    Running a presentation via VGA out with Firefox/Safari open. When I hit 'esc' to come out of slideshow, monitor stated resolution too low. Now Safari and Firefox browsers are still open, but I can't see the browser window on either. Ideas?

    If you use Lion, go to Applications/ Mission Control and, if you have more Desktops, as attached, it means you have more, and you must select the one you need for a certain app. If default settings has not changed, this is Control with left / right arrow
    If in Snow Leopard and earlier, you have these settings in System Preferences only. In Lion, you also have some settings in Sys Prefs.

  • I was on Itune match last year and I do not want to renew this year. I turned it off, but I can't see my music files anymore... How do I get those back to my computer?

    I was on Itune match last year and I do not want to renew this year.
    I turned it off, but I can't see my music files anymore...
    How do I get all my music back to my computer?

    What about if I want the entire playlist available so that I can view it in my finder the way I was able to before I made it a playlist?

  • Can't see my external drive anymore after updating to 10.5.5

    Hi! Another problem after updating to 10.5.5: I can't see my external drive anymore. It's a lacie quadra, plugged to my iMac via firewire 800.
    Really hope they fix this update really soon...
    Any of you knows how much time Apple usually takes to solve upgrade bugs like these we're all experiencing with 10.5.5? Do they do it fast?

    Hi Barry, I'll eventually do, but there are other people that have had the same problem right after upgrading to 10.5.5. I really think it's an os x bug, just like the other graphic problems that people are reporting now.
    I think Apple should take these reports quite seriously.
    Anyway, also think that probably these bugs are confined to iMac intel, as some one else pointed out before in this forum, because some friends of mine upgrading their MacPro, didn't have any trouble.
    Bye!

  • After installing Lion os I cannot see my desktop 1 nor can I see my open windows when I go to finder, I just get the grey/black background that comes with mission control. Any ideas as to how to solve this problem?

    The top picture is what my Desktop 1 looks like. And the picture below is what my desktop looks like after clicking mission control. Ive tried changing wallpapers, changing preferences, etc. and I still can't figure out what's wrong. As you can see, on mission control you can't see any of the open windows, or anything that I have placed on my desktop. Any ideas as to how to solve this issue?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • Can't see whole Keynote window

    I'm using Keynote 3.0.2 on OS10.3.9
    On my dual G4 19" monitor I can see the whole window/slide (top ruler says 14") plus the thumbnail slides on the side. Either in the Work or Play mode. All works great.
    When I use it on my 15" iBook G4, I can only see 11.5" of the window/slide. Which means I'm always scrolling in both directions to align things... a real pain. I've looked at all the preferences and can't find anything that would give me the complete slide. When I click on PLAY, the whole slide takes up the iBook screen which is what it's supposed to do.
    Any ideas on this?
    Thanks all.

    Unbelievable!!! That was too easy.
    Many thanks.

  • Can't see Report Layout in IE

    Hi All,
    When i am executing the report in report designer, the report is executing but cant see the layout of the report in IE . I can see all tools and options except report layout at portal and even i m not finding any error msg also. plz help in this regards.
    Regards,
    Kaushik

    Hi Kaushik,
    1) Are you facing the same problem with any other reports you format on report designer ?
    What changes have you made to your report output?
    Report Designer is a new feature of BI 7.0 and I know only the theory of it. You said you have checked with WAD..have you tried using this report which is having problem in WAD as 'Report Web item'?
    There might be a setting that you need to do in report desginer or there is some additional installation to be done in order to support Report Designer (remember this is a new feature so even Basis or Protal teams are new to it!)
    See these two items from help.sap,
    4. Executing the Report
    You execute the report in the portal (Web). The report is displayed in the standard Web template for reports. You can set the standard Web template for reports in Customizing for the standard Web templates at SAP NetWeaver ® Business Intelligence ® Reporting-Relevant Settings ®BEx Web ®Set Standard Web Templates ® Enterprise Report.
    You can also create a print version of the report directly in the Report Designer. The report is converted into a PDF document, which you can then print.
    5. Publishing the Report
    You can publish reports in BI roles or as iViews in the portal.
    You can also call the BEx Broadcaster from the Report Designer and broadcast reports. More information: Functions of the BEx Broadcaster
    Also see this.
    Use
    When you display a report in the portal (Web), it is automatically embedded in the standard Web template for reports. The report is displayed in a table on the Web. In addition, a date in the upper area of the Web template indicates how current the data is. Using the standard pushbuttons provided, Information, Send, and Print Version, and the link Filter, you can access the most common functions for navigating in and further editing your report.
    Integration
    When you have created and saved a report in the Report Designer, choose  (Execute): The report is displayed automatically in the portal using the standard Web template for reports.  
    From a technical perspective, the standard Web template for reports is based on the 0REPORT_DEFAULT_TEMPLATE Web template. This Web template is set as the default for displaying reports from the Report Designer in the SAP Customizing Implementation Guide under SAP NetWeaver ® Business Intelligence ® Reporting-Relevant Settings ® BEx Web ® Set Standard Web Templates ® Enterprise Report. The standard Web template contains three pushbuttons, Information, Send and Print Version, and the link Filter to call the filter pane.
    You can copy this Web template to make changes and set it as your new standard Web template for reports in the IMG. Note that to activate the changes in the SAP Reference IMG, you must start the J2EE Engine.
    Here is the link.
    http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Do keep us updated on the progress of this issue.
    All the best!
    Regards
    Sudeepti

  • Can't see shares between Windows XP PCs and iMac

    I have an Intel iMac running 10.4.9. I have 2 Windows XP-based PCs. One Windows PC and the iMac are connected wirelessly. The other Windows PC is on wired Ethernet. On both the Windows PCs and iMac the firewalls are disabled. The machines are on the same IP subnet (192.168.2.x)
    Windows file sharing is turned on via the Mac's System Preferences. In addition, I've created an SMB share to another volume using SharePoints. I also set the SMB workgroup of the of the machines to a common name. Likewise, I have shared directories on both Windows PCs.
    My problem is that I can't access the shares on the iMac from the Windows PCs and vice versa. The Windows PCs can see each others' shares.
    One thing I've noticed is that I can't ping the iMac from a Windows PC, but I'm not sure if that service is normally running on the iMac. I can ping both of the Windows PCs from the iMac. I can see the computername of the iMac in the Windows Network list of workgroup computers, but when I click on it, I get a message that it's not accessible and that the network path was not found. I don't see the Windows PC's workgroup in the Mac's Network browser via the Finder at all. I also can't connect using the "Connect to Server command" and directly entering the IP address as "smb://192.168.2.2/sharename" I just get the "Connecting..." window and the candycane progress bar indefinitely.
    This all worked at one point with a previous router, but I didn't use any sharing for a month or two and switched routers. But basically the network's config is the same.
    Any ideas how to get sharing working in either direction?
    Thanks,
    Judd
    Message was edited by: jvolino
    Message was edited by: jvolino

    Well I've double checked and under the Sharing preference, if I click on the Firewall option (tab), it says "Firewall Off" with a "Start" button below it. I also tried turning it on (with the various services that I want to enable checked in the list below it) and turning it back off. Same result: I can see the iMac in the Windows network neighborhood (and the iMac's iTunes shared library name in iTunes) but if I try to access the share or the iTunes library, the Windows PC fails to connect.
    Is there some command I can issue in Terminal to better see what state the firewall is in?
    Yes, I have a wireless router, through which the Windows PC and iMac are connecting.
    Thanks,
    Judd

  • Can only see desktop background & windows are blank

    My computer (a G4 MDD) is not starting up properly. It will start up but icons, the dock, and text in the menu bar will not appear. It appears the computer works. I had an alert pop up which only appeared as a white window box. I couldn't read it. I only knew what it said because I previously had set up for alerts to be read by the computer. I was able to hit enter and the window went away. Looks like I strictly can not see anything on the computer. I can't find any info on this anywhere. Hope someone can help! (Also, this happened after the computer was forced off during a software update -- of what, I'm not 100% since I wasn't there but I believe it was at least iTunes and a Security Update.)

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly please update the driver and in addition you can try below registry workaround.
    To do this, change the value of the following registry subkeys to 3 (Manual) or 4 (Disabled)：
    •HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\cdrom
    Name: Start 
    Type : REG_DWORD 
    Data: 3 or 4
    •HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\parport
    Name: Start 
    Type : REG_DWORD 
    Data: 3 or 4
    Note: If the above registry is changed to 4 (Disabled), the related device is not usable because a driver used in the device is not loaded. Therefore, if the device will be used in the future, the above registry should be set as 3 (Manual).
    More information.
    1.KB 933757
    2. Event ID 7026 — Basic Service Control Manager Operations
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Can't see InDesign layout in InCopy layout mode

    We have just installed CS6 and one issue I am having is I can't see the page design when switching to layout mode. I can see the formatting of the story, but not the page the InCopy document is associated with. All of this is on a Mac network. Is there something about InDesign that has to be associated with InCopy in order to see layout mode correctly?

    You might want to take some time to watch some training videos on
    lynda.com. Anne-Marie Concepcion has fabulous courses that can help you
    avoid these types of hiccups.
    Here’s a link for a 10-day trial: http://bit.ly/1xHYd0i

  • *** I can't see my "drafts" folder anymore

    I must have done something wrong here. I can't see my "drafts" folder in my list of mailboxes anymore in MacMail. How do I get it back so I can see the draft emails I'm working on?
    Thanks in advance.

    What type of account is this (POP, IMAP, .Mac)? Which mailboxes do you see?
    BTW, your profile doesn't show the version of Mac OS X you're using, which is much more relevant than the computer model in this forum...

Maybe you are looking for

  • Photoshop CS5 won't open .psd files

    Bascially I click on a psd file to open with photoshop, photoshops opens then shows this error message These are my specs: Model: iMac, 4 processors, Intel Core i7, 2.8 GHz, 4 GB Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB These ar

  • New X220 support dual external monitors with mini dock plus?

    Hi, I need to purchase a new Lenovo laptop in urgent. But we need to make sure it support dual display to two external monitors. (VGA) My question is: (1) we plan to purchase with mini dock plus, it have two HDMI port. can it support two external mon

  • How to check audit setting and read audit data?

    I enable auditing for ase and then check information for sysaudits_xx table like: select * from sysaudits_02 order by eventtime desc and got same data like: event eventmod spid eventtime sequence suid dbid objid xactid loginname dbname objname objown

  • If I share my photos in icloud can I delete the originals from my iphone?

    If I share my photos in icloud, can I delete the originals from my iphone (and mac)?

  • Non web-based content in portal

    Hi all, Is it possible to run ordrinary windows-applications with a GUI-screen, for example MS Outlook, in or from within the portal? If yes: Where can I find out more? Regards, Sturla