Can't see "My Network"...

Being in the Finder and clicking on the left "Network" brings up a list of:
Library
Servers
Svenjas (my daughters computer)
on other Macs I could find a folder called "My Network", where has it gone?
Joachim
Any help more than welcome, can't connect to a XP-Machine at the moment.

I've seen that a few times.
Sometimes toggling the Finder pref for showing the Sidebar Network Icon off, rebooting, then toggle it on again will fix it.
Another thing that might help is to get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.

Similar Messages

Can´t see my Networks adapters in the Device manager!

Help!
I´m using Yoga 2 pro/windows 8.1
I can´t see the Networks adapter in the Device manager?!
(and no internet/WIFI connection is not working any more)
I´ve tried to install the latest Wireless Driver from lenovos homepage but it there is still problems. The laptop still can´t find any network adapter and the wifi connection doesn´t work, as it did last week!
Any one who has the same exeperience/or knew how to deal with these kind of issues?
/Rasmus

hi Rasmus,
Can you try these steps:
1. Check if you have a Network Controller entry in the Device Manager and follow this guide to get the hardware ID and on how identify the device.
2. If there's no Network Controller entry in the Device Manager, then it's possible that the Wi-Fi card might have been disabled.
Things to try:
- Boot into the BIOS either by pressing Fn+F2 on boot-up, the OneKey Recovery button, or via the UEFI Firmare Settings.
- In the BIOS, navigate to the Configuration tab and disable the Wireless setting hit Fn+F10 to Save and Exit then shut off the machine.
- Boot back into the BIOS and enable the Wireless setting then hit Fn+F10 to Save and Exit and observe if you can now detect wireless networks.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

MacBook Pro can't see Airport network but three other macs in house can

Very strange. I can connect my three iMacs (G3, G5 PowerPC and G5 Intel) to my Airport Extreme Network, but my MacBook Pro can no longer see the Network, and Airport utility (from MacBook Pro) cannot see the Airport base station (although other macs' Airport Utility can no problem). My MacBook pro can see 4 other networks (my neighbours' networks). Doesn't seem to be a problem with my MacBook Pro airport card as I can connect to the (non-Mac) wireless network at work with no problem. Am really confused (not the first time)!
Installed the latest Airport Extreme firmware last week, which was the start of the problem, as I then lost the ability to connect to my Virgin Media Broadband digital TV box, necessitating Virgin engineer visiting at weekend to connect a cable modem to the cable tv box, to which the Airport Extreme station is now attached. Had problems connecting my MacBook Pro last night, but eventually managed it. All other macs connect seamlessly. Am stumped.

I'm troubleshooting a friend's MacBook (Model ID: MacBook4,1) that is having serious Airport problems. This machine's Airport can't see ANY available networks. Sitting right next to my MacBook (identical model), hers is blind while mine can see several open and locked networks including my own Airport base station. If I choose to "Join Other Network..." and enter the network name and password for my network, her machine almost immediately gives me a "Connection timed out" error. It doesn't matter where her MacBook is, it can't see any networks anywhere.
This is a new problem as her Airport was working fine for the first few months. I've just finished making sure all software updates have been applied so she's now running the latest-greatest, but still no Airport.
This sounds similar to the problems other folks here are describing so I figured I'd add my voice to the chorus. I guess I'll take her machine down to the local Apple store this afternoon and see if they have any ideas. At this point I wouldn't be surprised if her Airport card was fried.
Calenlas

Installed OSx Lion. Can't see my network user on launch

Hello,
installed OSx Lion a few hours ago but on OSx launch I can't see my network user anymore.
Network user was appearing properly on Leopard.
Please help as I can't get access to our company network anymore.
Thanks!

I figured out the answer. unfortunately, the Belkin router I have does not support a HDD formatted in Mac OS. I guess I have to decide whether to stay with FAT32 for my netweork drive or get a new router...

Can't see a network (Netgear router) I know exists

I've in the process of relocating and am in temporary accomodation without broadband, but have been lucky enough to get to know my neighbour who is running a wireless network next door on a Netgear router (not sure which model) and has offerred to let me connect via that.
However, now that I'm home and trying to do so I can't see the network. I'd guess that the router is only about 50 feet away through a couple of walls, so I wouldn't have thought that would be a problem. There is also supposed to be another wireless network running in the building, but I can not see that one either.
Before I moved I used a Netgear DG834G wireless router myself with my Airport Extreme-enabled Pwerbook, and I can't remember having trouble seeing the netwrok when setting that up (though it was a couple of years ago so memory may be fuzzy).
Does anyone know how I can scan for non-Airport Base Station networks?
Or do I just need to go back to my neighbour and get the IP Address to configure manually?

If your neighbor's wireless router isn't visible to your Mac, getting and IP address and configuring manually won't get you connected. Two things I suggest you do:
1. verify with your neighbor that his router is not configured with "SSID broadcast disabled", thus rendering his router invisible
2. see if your Powerbook gets a signal when located in your neighbor's apartment. Fifty feet and a couple of wall could indeed be beyond usable range.

IPhone Can not see home network

Ok, I have read a lot of strings about Wii issues and I have tried the following:
- Unplugged (rebooted) my cable modem
- Unplugged (rebooted) my Airport Extreme
- Rebooted my iPhone multiple times
- Turned on and off the Airplane Mode to re-search for WiFi connections.
- Searched manually for the connection (typing in name and password)
- Turned off the WAP/WAP2 Personal security
but nothing seems to work. I can not view my home network on my WiFi.
I can see all my neighbors networks and the phone works great on free networks around town but my home network will not show up.
My home network does work on my laptop though.
Any thoughts?

Nathan:
Great suggestion. I changed it to 802.11 n (with b/c compatability) and I can now see the network on my iphone and I can log in (I think).
I chose the network from the list and put in the password. The first couple of times it did not take but the 3rd or 4th time it seemed to log on. If I go to Settings and look in the Wi-Fi area it has my network name as the network it is logged into but...
There is no WiFi symbol on the top bar of the phone (only an E, for the Edge network) and when I chose any application (Safari, YouTube, etc.) it only accesses through the Edge network.
Any other thoughts?

Can't see Mac network with JFileChooser

Greetings
I am using a standard JFileChooser to select files and directories in my application running on MacOSX Snow Leopard. My problem is that I can't see my network using JFileChooser. I can see all the other Macs on my network using Finder or a standard Mac file browser but not on JFileChooser. I suspect I am missing something really simple but at the moment I am at a loss.
Any suggestions would be most appreciated.
Regards
Doug Bath

Hi,
I also have the same problem.
My belkin wirelss router is set to channel 13, therefore my macbook cannot see this network when it search's, for the above reasons.
However unlike the situation above I am unable to change from channel 13 as we have discovered in the past that this is the only channel that is not in use by other networks around our area. The rest gave us interferance troubles.
I have a number of windows laptops in the house and there is a setting that you can change so the laptop will search for channel 13. I was wondering if anyone is aware of a setting on the macbook that will make the airport card search for 1 - 13 not just channels 1 - 10 as it is now.
I thought I would add this question to this topic as it is very similar. I hope I was correct in doing so.
Thanks,
Josh
Macbook Mac OS X (10.4.8)

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

Can't see wifi network

Today I got a wimax modem with built in wifi (greenpacket DX230). There is no customization of the device at all. The SSID and password are already printed on the device and are supposed to work without setup. However, I cannot see the network from my macbook running snow leopard, even if I am right beside the device. I have checked several PCs and they can all see the network, and my iPods can also see the network. I have yet to try another mac (will try tomorrow).
Does anyone know why this would be? I thought wifi was a standard and that there is no deviation from it? Why would my ipods be able to see the network but not the macbook? Kismac doesn't even show the network

GShumway wrote:
I cannot see the network from my macbook
It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
They may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

IPhone 4S - iOS 6 - can't see WiFi networks

I have a strange problem with my iPhone. It's a locked iPhone, bought from Vodafone from my country. I use it locked and un-jailbreaked. I went in France for 2 weeks where i had my Roaming active, but i didn't used cellular data, only WiFi. Now, back home in my country, it seems that i can't see wireless networks. I tried to reinstall, update to the last firmware, it seems that wireless appear for 1 second when at first start, then it disappears and i can't see no more WiFi networks in list, tho there are like 10 networks around me.
Any ideas? Or someone else had the same issue?
Thanks,
Nick

i went to Vodafone. They said they will replace it. It seems like a manufacturing defect.

How can I see my network drive from time capsule on windows vista pc?

I connected my Time Capsule 2tb to Windows PC and do not see the Network Drive for TC. I can see TC on my wireless MacProBook, but cannot see TC drive on the pc. What can I do on the PC to find Time Capsule's drive?
Thank you.

From the Mac as it is easier to use.. open airport utilty and go to the disks, file sharing page. turn on the guest account.. give read write access.. and make sure the TC is in the correct workgroup or type in the work group name.. update the TC.
In vista.. Open windows explorer.. in the address bar type \\ip\
IP meaning the IP of the TC. . wait.. waiting wait.. windows scratches its bum.. thinks some more.. will finally kick up a username and password request.. type in whatever you need. Voila.. TC appears.

Can not see Guest Network tab on Airport Extreme-

I have an Airport Extreme base station with the Guest Network enabled. Last week my neighbour bought a brand new Airport Extreme base station and asked me to help set it up. Problem is that I can't see the Guest Network tab on his Airport Extreme when I use the Airport Utility. I can see it on mine.
In fact, as the networks are close I can see both airports at the same time. I have verified that the firmware versions are the same.
Any clues?
Thanks in advance.
Jordan

Your friend likely has a gateway (combination modem/router) from his service provider. Since this device performs as both a modem and a router, and the AirPort Extreme is also a router, you have two routers in series on the same netowrk.
When this occurs, the second router...the AirPort Extreme in this case....must be configured in Bridge Mode for correct network operation.
Check the following setting:
AirPort Utility > Manual Setup
Click the Internet icon
Is the setting for Connection Sharing set to Off (Bridge Mode)?
If yes, the Guest Network feature is not available in this setting. Your friend will need to replace his gateway with a simple modem if he wants to enable the Guest Network feature.

Laser jet pro200 color mfp m276nw Scaner can not see the network path for the scan-to-folder

I am setting up my scaner...
with the scan-to-e-mail- no prob, but to scan to the folde (computer) the software said i have incorrect network path.
It is must be somekind bug in the system. Cause I just copy the path from the direct address in my copm!
I have attached the files regarding my fails-maybe someone is smarter then me and able to explaine what am I doing wrong?
Many thanks to everyone in advance...

Hi @olenasukhina,
I see that you are having issues setting up the Scan to a Network Folder. I can help you with this.
I have provided a document for setting up the Scan to a Network Folder.
How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder).
Here is a post from @skile88, which resolved this issue. Re: HP LASERJET PRO 200 MFP M276NW - Can't scan to Network Folder.
If the issue persists, then I would recommend to call HP Tech Support, since they have access to remote into your computer to find out more of what is going on. Call 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
Let me know how you make out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Changed my Airport Name XP on my Macbook can't see my network

The OSX side of my Macbook see's my Airport Network just fine.
But, I need to run some updates on the Bootcamp XP Win side of my Macbook.   (which used to work just fine)
When I run the Windows "Scan" for networks, it doesn't even see it.   So, I can't proceed to my Network password etc.
It does see other networks at homes in my neighborhood.
My iPhone and iPad recognize the Airport Network, but not my XP.
Help is appreciated.
Thanks
Rick Conklin
Wichita, KS
email   [email protected]

Got it solved.
I had hoped the "scan" would see my Network. Turns out I had to manually add the network in Windows. Up and running now.
Have a great day.
Rick

Aria Extreme Can't see Airport Network

I have a Lombard PowerBook that I am fixing up for my daughter to use. I put a new 40 gig HD in it and loaded up 10.3. After that I plugged it into my home network via ethernet and ran software update.
I originally bought a Wavelan PC Card for accessing my Airport Extreme network, but found that it does not support WPA security and that's pretty important. I then picked up a Sonnet Aria Extreme card and, after updating the Airport drivers to version 4.2, I got the machine to recognize the card as an Airport card and thought I'd be able to connect to my network.
Unfortunately I am having trouble and cannot connect. The Airport turns on, but it does not see my network in Internet Connect. I do not have a closed network and in fact I can see my network as well as my neighbor's network in the Airport menu of my iBook, while sitting next to the PowerBook.
I have confirmed that I have the correct security settings (WPA2 Personal) and password on all machines. I also, as mentioned, have had my iBook, with its built-in antenna right next to the PowerBook, so I'm pretty sure it should be able to see the network as it is in range.
Please let me know if anyone else has had such a problem and has found a solution.

if the computer running ARD is on the wireless network then it'll see any clients on the same network. if the computer running ARD is on a wired network and a wireless network exist on that wired network, you will not see any of the computers on the wireless network. you can forward the required ports to one specific computer on the wireless network on the router.
to control any other computers on the wireless network, you'd have to install another licensed copy of ARD on the computer that you've forwarded the ports to and then open up ARD on that with your main admin mac to then control the other computers on the wireless network. thus you'd be running ARD on computer 'A' to control computer 'B' and then use computer 'B', from computer 'A' to control all other clients.

Mac can't see wireless network - have checked other posts but no solution!

I have scanned many posts on this topic but have not seen my specific problem resolved, so I'm starting a new post. Here's all the facts and things I've checked.
Hardware Details
iMac 1.25 GHz G4
Airport Extreme card (shows up in system profiler)
Linksys 802.11g router
Network Details
WPA Personal
Have never had a problem using this network. 2 PC's an 2 Macs regularly connect. Right now one PC and my wife's MacBook Pro are using the network.
The iMac was seeing the network yesterday - today it can't even see it!
Per the advice from many helpful posters, I have checked that mac addressing is disabled on the router.
I have checked that appletalk is active on the iMac
I have restarted the iMac several times after applying various changes.
This is a very perplexing problem. Any help would be appreciated.

Hi kmacwilliam,
I am having a similar issues with yours, my MBP and MB couldnt not stay connect to the dlink router recently. But the PC's been working fine all the time. The wireless would drop and could not see the network again while my neighbours' networks were still displaying. Even restarting the MBP and router wont see my wireless network.
You can try these things and see if it works for you, it's worked for me for time being. Please post back the outcomes:
1. Delete any airport-related passwords in the "Keychain" so no airport passwords are stored
2. Shut down the iMac
3. Reset the PMU in your case for the G4 iMac, you may need to open your back case to reset it
3. Turn on your iMac and you should see the network again
I am suspecting this might be software issue, hope this works for you.

Can't see "My Network"...

Similar Messages

Maybe you are looking for