Can´t see my Networks adapters in the Device manager!

Help!
I´m using Yoga 2 pro/windows 8.1
I can´t see the Networks adapter in the Device manager?!
(and no internet/WIFI connection is not working any more)
I´ve tried to install the latest Wireless Driver from lenovos homepage but it there is still problems. The laptop still can´t find any network adapter and the wifi connection doesn´t work, as it did last week!
Any one who has the same exeperience/or knew how to deal with these kind of issues?
/Rasmus

hi Rasmus,
Can you try these steps:
1. Check if you have a Network Controller entry in the Device Manager and follow this guide to get the hardware ID and on how identify the device.
2. If there's no Network Controller entry in the Device Manager, then it's possible that the Wi-Fi card might have been disabled.
Things to try:
- Boot into the BIOS either by pressing Fn+F2 on boot-up, the OneKey Recovery button, or via the UEFI Firmare Settings.
- In the BIOS, navigate to the Configuration tab and disable the Wireless setting hit Fn+F10 to Save and Exit then shut off the machine.
- Boot back into the BIOS and enable the Wireless setting then hit Fn+F10 to Save and Exit and observe if you can now detect wireless networks.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

I can't find my wireless adapter in the device manager. cant connect wirelessly

I can connect to the internet using my ethernet cable but i can't connect wirelessly anymore. I restored my system using the restore disks but I still can't connect. I looked in the device manager and I don't see the wireless card. how can I get it reinstalled? I'm getting the following errors:
local area connection is experiencing driver or hardware related problems.
Local Area Connection adapter is not working properly
What can I do to fix this? I've tried a lot of things but not much progress.
HP Pavilion Slimline s5310y
can anyone help me?

Hi robiroe,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that your wireless adator on your computer is not visible in the device manager, and I would be happy to assist you!
To begin, I would suggest uninstalling and reinstalling the wireless adaptor's driver software. To do this, please follow this document on Uninstalling Software (Windows 7). The next step will be to re-install the driver by downloading the Original NVIDIA Networking Controller Driver. If the issue persists, I recommend following this document on Testing for Hardware Failures (Windows 7). This should help determine if there is a hardware issue.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Can I see my iPod activity without the device?

Mu iPod was stolen and I received a notification that my iPod was used for iMessages and FaceTime. I want to find out what activity is taking place so I can give the information to the police.

Only by accessing apps and services that are on the iPod. You can log into your email account and for activity.
I would
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Can't see other Macs/PCs on the network...

Since installing the Safari 6/Apple Remote Desktop Update I can't see other Macs/PCs on the network. If I restart I can see 2 Macs, but after a while they disappear, and I can see/connect to nothing...

If you are using DHCP check that it is getting the correct addressing. In the event that it is but still not working then test by giving it a fixed IP and see if it then works.

MacBook Pro can't see Airport network but three other macs in house can

Very strange. I can connect my three iMacs (G3, G5 PowerPC and G5 Intel) to my Airport Extreme Network, but my MacBook Pro can no longer see the Network, and Airport utility (from MacBook Pro) cannot see the Airport base station (although other macs' Airport Utility can no problem). My MacBook pro can see 4 other networks (my neighbours' networks). Doesn't seem to be a problem with my MacBook Pro airport card as I can connect to the (non-Mac) wireless network at work with no problem. Am really confused (not the first time)!
Installed the latest Airport Extreme firmware last week, which was the start of the problem, as I then lost the ability to connect to my Virgin Media Broadband digital TV box, necessitating Virgin engineer visiting at weekend to connect a cable modem to the cable tv box, to which the Airport Extreme station is now attached. Had problems connecting my MacBook Pro last night, but eventually managed it. All other macs connect seamlessly. Am stumped.

I'm troubleshooting a friend's MacBook (Model ID: MacBook4,1) that is having serious Airport problems. This machine's Airport can't see ANY available networks. Sitting right next to my MacBook (identical model), hers is blind while mine can see several open and locked networks including my own Airport base station. If I choose to "Join Other Network..." and enter the network name and password for my network, her machine almost immediately gives me a "Connection timed out" error. It doesn't matter where her MacBook is, it can't see any networks anywhere.
This is a new problem as her Airport was working fine for the first few months. I've just finished making sure all software updates have been applied so she's now running the latest-greatest, but still no Airport.
This sounds similar to the problems other folks here are describing so I figured I'd add my voice to the chorus. I guess I'll take her machine down to the local Apple store this afternoon and see if they have any ideas. At this point I wouldn't be surprised if her Airport card was fried.
Calenlas

Installed OSx Lion. Can't see my network user on launch

Hello,
installed OSx Lion a few hours ago but on OSx launch I can't see my network user anymore.
Network user was appearing properly on Leopard.
Please help as I can't get access to our company network anymore.
Thanks!

I figured out the answer. unfortunately, the Belkin router I have does not support a HDD formatted in Mac OS. I guess I have to decide whether to stay with FAT32 for my netweork drive or get a new router...

Can't see Mac network with JFileChooser

Greetings
I am using a standard JFileChooser to select files and directories in my application running on MacOSX Snow Leopard. My problem is that I can't see my network using JFileChooser. I can see all the other Macs on my network using Finder or a standard Mac file browser but not on JFileChooser. I suspect I am missing something really simple but at the moment I am at a loss.
Any suggestions would be most appreciated.
Regards
Doug Bath

Hi,
I also have the same problem.
My belkin wirelss router is set to channel 13, therefore my macbook cannot see this network when it search's, for the above reasons.
However unlike the situation above I am unable to change from channel 13 as we have discovered in the past that this is the only channel that is not in use by other networks around our area. The rest gave us interferance troubles.
I have a number of windows laptops in the house and there is a setting that you can change so the laptop will search for channel 13. I was wondering if anyone is aware of a setting on the macbook that will make the airport card search for 1 - 13 not just channels 1 - 10 as it is now.
I thought I would add this question to this topic as it is very similar. I hope I was correct in doing so.
Thanks,
Josh
Macbook Mac OS X (10.4.8)

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

IPhone 4S - iOS 6 - can't see WiFi networks

I have a strange problem with my iPhone. It's a locked iPhone, bought from Vodafone from my country. I use it locked and un-jailbreaked. I went in France for 2 weeks where i had my Roaming active, but i didn't used cellular data, only WiFi. Now, back home in my country, it seems that i can't see wireless networks. I tried to reinstall, update to the last firmware, it seems that wireless appear for 1 second when at first start, then it disappears and i can't see no more WiFi networks in list, tho there are like 10 networks around me.
Any ideas? Or someone else had the same issue?
Thanks,
Nick

i went to Vodafone. They said they will replace it. It seems like a manufacturing defect.

How can I reset my Network Card to the default?

How can I reset my Network Card to the default? I suspect I have a virus, (antivirus software has been unable to decect or remove). What happeneds is that my iMac keeps getting pointed to a proxy. I remove it and with in a day it returns. I only have access to a few sites when under the proxy setting. I want to LOCK DOWN my network settings. When I manually set everything back to default my machine works like new... but within a day or so it will be back to being jacked up.
2nd question : Anyone have a sugestion on a good anti virus with my case in mind??? (im using iAntivirus and I think it is useless)
Dr. N

I'm a bit unclear on what you're seeing, but it's undoubtedly a problem with your network itself. There is no known Mac malware that behaves anything close to what you're describing, so anti-virus software is not going to do you any good. (And you're right that iAntivirus is useless.)
If you're seeing redirects or similar behavior in your web browser, see Eliminating browser redirects and advertisements.
If that's not it, please try to describe in detail the behavior you're seeing.

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Why can i see only one picture in the illustration windows with iTunes 10.5.1?

why can i see only one picture in the illustration windows since iTunes 10.5.1?

Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
I've developed a quick workaround, and am still hoping Apple will fix this!
Go To Get Info on the tune you want to see secondary artwork for.
Go To the Artwork tab
Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
you end up with a lot of jpgs on the desktop to discard!

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

Can´t see my Networks adapters in the Device manager!

Similar Messages

Maybe you are looking for