Can't see my new messages

Mail shows me I have new messages in my inbox. When I click on the inbox, it's blank. Nothing shows up.
I made a mistake by deleting the contents of my personal box yesterday and all my messages disappeared. I'm not sure why new messages aren't showing up.
I went into my Library folder and moved the MessagesUIDalreadydownloaded file onto the desktop, checked things, moved it back. Still nothing happens.
Can anyone help??
Thanks.
I'm using Mail 1.3
J

I made a mistake by deleting the contents of my
personal box yesterday and all my messages disappeared.
I have no idea what are you talking about here.

Similar Messages

  • I can't seem to access new mail on my I pad . I can only see strings of messages that are related to each other. I also have lost the ability to search for messages that are no longer on display on my I pad.

    I cannot seem to access properly any more the new e mail messages on my I pad. I can only see strings of messages that relate to each other.
    Also I cannot search for old messages that have now disappeared . The search bar has disappeared.
    Tom

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • HT1430 I can't see any new email messages that I get.  I can see my old messages.  I sent an email to my self, I see it in my sent box but not in my in box

    Need help..I can't see any new email messages on my iphone or ipad.  I can only see old messages.  I sent something to my self.  I see it in the sent box but not in my inbox

    Delete your account and start fresh.  You should be able to see the downloads on a fresh install.

  • HT3228 I can't see the new email from my iPhone

    I can't see my new email using my iPhone.
    The only way I can do it is to open the email app then slide to the end of the inbox then load more messages & this is the only way instead of the normal way which is to open the mail app & then the iPhone will check for new emails automatically.
    So If didn't check the emails that way I will never know about the new emails.

    Hello,
    Please use the following steps to solve your issue:
    Settings > Mail, Contacts, Calendars > Fetch New Data > Push: On > Fetch: Every 15 Minitues
    Note: These settings will affect your battery life. You will see a increase in the time between needed charges. Just so you know.
    Regards,
    Jake

  • Can not see the new appending fields in RSA6

    Hi,
    I add one appending structure to existing datasource, after that I can not see the new field in RSA6, RSO2. However I can see it from RSA2 and SE11 (for extract structure).
    Any idea?
    Thanks
    Victor

    Victor,
    can you tell me how u have done this. you have a DS in RSA6 created from RSO2. then you created a append structure right? then click on your DS on the RSA6 screen. click on change icon on the application tool bar or function key CTRL + SHIFT +F1, maintain the datasource.
    can you able to see the fields here or not (i'm asking for change mode)?
    Nagesh.

  • How can I add a new message(custom text message) to the holiday approval em

    How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
    TIA

    The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
    For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
    JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
    So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
    The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
    It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

  • How can I see my deleted messages on my icloud

    How can I see my deleted message and message from my icloud

    Huh? You can't. Once you delete something, well it's deleted.
    If you have a backup, that contains these deleted messages, you can restore from that backup, to restore them to your phone. If no backup, or your backup has been overwritten, then they are gone.

  • My itunes can't see my new ipad ..did everything what day said on the apple web and still nothing ..help

    my itunes can't see my new ipad ..did everything what day said on the apple web and still nothing ..help.....

    What is "everything"?
    First, be sure you are using the most recent version of iTunes.
    Use a different cable and USB port.
    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up. I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest. any suggestions

    I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
    I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
    any suggestions?

    weird.
    It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
    Thank you so much for your prompt replies.
    It's past midnight here so I'd better get some rest...
    Good night captfred!

  • I can't see my gmail messages

    I can't see my gmail messages in Safari 5.1.4. I can see them in FireFox. Any ideas. Things were fine until two days ago.

    Hi...
    Check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info.
    If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari.

  • MBP 5.5 can't see my new Hard drive

    MBP 5.5 can't see my new Hard drive even though its running Mavericks off the new Hard Drive through a usb cradle

    I've seen suffienct posts on this site to not argue about the problems with SATA cables, however it sounds like what you're saying is that the SATA cable is bandwidth limited. The types of things I remember reading about are actual breaks in the cable, rendering it useless for all drives, or the insulation wearing off. In the latter, it's on units where the cable crosses over an optical drive and starts intermittently shorting out on the case. If this happens the user typically gets data corruption, but the drive is usually seen and visible.
    On the other hand, I do software development and we have to be able to boot numerous versions of MacOS. For reasons known only to God (and Apple, I hope) once in a while the NVRAM seems to get mixed up and ends up being unable to see the boot drive. Doing the resets always corrects the problem.
    I wouldn't dismiss your recommendation of replacing the cable, but the resets are free and easily done.
    Another freebee to try would be to hold down the "alt' key before powering on the unit, turn on the power, and then, while holding down the alt key, see if the drive shows up as a bootable drive. This will only work if there's an OS installed on the drive.
    In my opinion, it's always best to try the free things before going out and buying anything.

  • HT4528 I can't see the new light blue font on many of the displays.  Is there a way to change this color?

    I can't see the new light blue font on many of the displays.  Is there a way to change this color?

    No you can change your wallpaper to make the font stand out more on your homepages and folders or you can adjustr the font size, bold and contrast here:
    Settings > General > Accessibility
    NOTE: Turning Bold text on will force your phone to reboot.

  • Upgraded to IOS 5, now mail on mac  can not create a new message/forward or reply to any messages

    Upgraded to IOS 5, now mail on mac is not working. Can receive mail but can not create a new message/forward or reply to any messages. It appears it has tried to create a new message in the background but I can't click on it.  Please help.

    Upgraded to IOS 5, now mail on mac is not working. Can receive mail but can not create a new message/forward or reply to any messages. It appears it has tried to create a new message in the background but I can't click on it.  Please help.

  • HT204053 can someone see my text messages through another source and not my phone

    can someone see my text messages through another source and not my phone

    What exactly do you mean through another source?
    Cause the only way I can think to answer this question is by stateing -
    If you send them a text message on another device or to their email, yes. otherwise no well unless you like emailed those to yourself and "someone" has access to your email etc etc etc yes...

  • Where can we see the SRW.MESSAGE

    Hi
    I am new to Oracle Reports. I have a report developed in EBS and it has SRW.MESSAGE statements. After the report is run where can I see the log of these messages. Can some help.
    Thanks

    Hello rajesh as you told that the cost esimate is deleted.
    Then there is no way to see the cost estimate.
    You canonly see the cost esimate in CK40N or in CK13N but you can not see the itemiaxation of that material for ehich we create the cost estimate.
    Hope it will clear you
    IF this informetion is usefull for you please assign some points
    Regards
    Ravi

Maybe you are looking for

  • Error message when I try to Forward mail. Please help.

    I tried forwarding an email to my wife, but couldn't, and I received the following error message: "The message could not be appended to the outbox." This is the first time I've had this happen, and first time I've ever seen this message. I have no id

  • Storing on external hard drive

    When you store on an external hard drive, do you store the iphoto library or copy of the individual photos? I noticed that when I do the library, and try to open a photo, there is a exclamation point instead of the image. When I open the actual photo

  • Essbase server

    Hi , Suppose , if Essbase server software is gone on any system , how can we recover already existing applications & databases on that server. some times i am facing this problem on my vista system(personal sys).

  • IPhone randomly needing restore and then not letting me?

    Ok, so my four week old iphone 3gs just up and stopped working. i got an alert on the iphone screen saying "iphone cannot make or receive calls. restore in itunes" so i tried restoring it and it didnt work. i updated my itunes, tried again, and it al

  • Sparse bundle disk images

    I've been doing a lot of reading about (and watching tutorials about) sparse disk images and sparse bundle disk images. Most of what I've read has addressed using sparse disk images as a way to archive and move from Mac to Mac FCPX projects and their