Can't See My Second HD

My new mac pro is suppose to have two HDs but i only see one on my desktop. I went into my Activity Monitor and it shows that there are two. Does anyone know how i can display the other HD on my desktop?

Open up the computer and slide HD's out and slide back in. Swap them between their respective trays. See what that does. Maybe even put them in Bay 3 or 4.

Similar Messages

ATV can't see my second computer

Win XP and Itunes 10 on my both computers. The account is also the same.
I just got AppleTV and its shows the content of my library on my laptop, but refuses to show my second computer.
Strangely, each computer sees the other's library.
I've open the necessary ports on the firewall.

I have an iMac and a Mac Mini. Both are running the latest OS and iTunes. Since I got my atv 2nd generation nothing works right. The atv worked the first time I turned it on, meaning it could see my Mac Mini (our media server). Then it stopped working. I can stream from Netflix but atv can't stream from the Mac Mini. I spent 3 hours on the phone with tech support at Apple. They were stumped. Finally we unplugged and rebooted my Airport X, Time Capsule, Computers, and atv. Then it worked. However, this morning my atv can no longer see my Mac Mini. Mac Mini and iMac can see each other's libraries but can't access them. Atv can't see any of my computers. Home sharing is turned on, on everything with the same account. What's going on?? Any ideas?

Can't see my second site

I've published my 1st site and can see it via my browser, but when I created a second site with iWeb08 and tried to see how it looked via my browser I get an error of "We're sorry but we can't find the iWeb page you've requested. It's possible that" can anyone help me

are you publishing to a different destination? how are you uploading? publishing to folder?

I can't see the second band on my wi-fi router on my mid 2010 15-inch mac-book pro

I GOT A D-LINK DI-825 DUAL-BAND ROUTER. I CAN SEE AND USE THE LOWER 2.4 GHZ WI-FI BAND, BUT NOT I DO NOT SEE THE 5.0 GHZ WI-FI BAND

Unlock your caps lock key when you post. It's considered shouting. have you consulted your owner's manual? Have you accessed the router's admin area setting?

10.4.5 doesn't see my second monitor

I just upgraded to 10.4.3 and then immediately after that to 10.4.5. Since I did, my computer can't see my second monitor. I ran the system profiler and it sees the second video card.
This is not a problem in 9.2.2 and it wasn't a problem in 10.1.5. Can anyone help me out? Thanks!!

It sounds like the firmware or drivers of the graphics card is out of date for 10.4 to understand there is a display connected to it or to give that option. Contact the graphics card vendor to see if there is more info you can get on either. Tell them the issue you are facing. Also check http://www.apple.com/swupdates/ if it was an Apple supplied graphics card as a build-to-order or part of the original release of that Mac model.
http://www.xlr8yourmac.com/ has a good database of graphics cards you can choose from and their compatibility.

Airport Utility can't see all my devices after new cable modem

Everything worked fine until I got a new cable modem from Comcast—it's a Cisco DPC3000. Now after firing that up, I can get to the web on my Mac Pro but my LAN seems to be missing. Airport Utility can see the AEBS (Base Station) that's connected to the cable modem but it can't see a second AEBS that's in my wife's office (wired to the Base Station in Bridge mode), or an Airport Express that's hooked up to my music system, or a second Airport Express that's used to extend the WIFI to a second bedroom. All these things worked fine previously—I could see them all in Airport Utility and I could access all those devices.
Any ideas will be much appreciated—been dealing with this most of the day.
Thanks
Peter

Well what do you know...after a week, it just magically decides to work, without even using Airport Utility.
Boy are these Airports touchy....and unreliable.
I still want to know: What makes these things drop in and out???

I purchaced A TV series on Itunes and I can only view 30 seconds of the show.

I bought a tv series and can only play 30 seconds out of 45 minutes....please help.

I am having the same issue. It shows the entire series purchased. I downloaded episode 1, no issues. now i am on episode 2. i downloaded it. at 1st i could only hear audio. i rebooted, now i can only see 30 seconds of the episode.
Whats going on?
I've been trying to solve this for an hour. snowed in and need something to watch!!!

Love this tool, but one problem: can't see beach balls on remote machines!

Hi, I have the lastest OSX and ARD on the machines on our small biz lan, and I have one problem: when controlling or observing other machines I can't see the beach ball when it occurs...making it look like ARD is hung (or something). It's very disconcerting...is there a switch somewhere to make this right? Thx
coocoo

I'd be very surprised if ARD is ever able to display the spinning beach ball on the managing Mac.
A couple of tips that may help:
1. Set the client computers to display seconds on the clock in the menubar. If the seconds are counting, you at least know that you are receiving visual updates. If you can't access a menu in the hung app, but can still see the seconds counting, you likely have a beach ball.
2. Run Activity Monitor on the client machine. A quick glance at the process list will show if an app is hung (and how much CPU it's gobbling).
3. Select "Force Quit" from the Apple menu. This will also show which apps are hung.
4. Peek into the /Library/Logs/HangReporter/ folder.
Cheers.

When my phone turns on it goes to the normal screen for 1 second and then it gets very large so you can only see a few icons

When I turn my iphone on, the usual main icon screen shows for about a second and then it blows up so you can only see a few icons at a time. How do you turn this off?

Your phone might be on Zoom somehow, try just the simple "gestures" fix
Double tap with 3 fingers on the screen, then drag down. That should at least zoom out. If that does not work, try scrolling through the screen, but using 3 fingers instead of 1.
From there you should be able to access Settings>General>Accessibility>Zoom>OFF
Hope this helps

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

2009 MBP can't see internal hard drive - for the second time!

Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
Thanks for any feedback!

Hi
I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
broadband.vodafone.ie/download/files/storage_mac.pdf
Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
Cheers
Topes

HT4863 I sent an email from my iPhone 3GS (via iCloud account) with around 16GB of attachment. It slowed down the phone for a few seconds, then appeared to be sent. However, the message is now not in the sent box, and I can't see an outbox at all. Any ide

I sent an email from my iPhone 3GS (via iCloud account) with around 16GB of attachment. It slowed down the phone for a few seconds, then appeared to be sent. However, the message is now not in the sent box, and I can't see an outbox at all. Any ideas?

That changes things a little bit , login to icloud.com and see if you can find it in your sent folder.
If it is there you did send, just need to wait until you phone syncs "sent folder" perhaps on wifi.
If it is not, then I would say it is lost and you may have to send again. They have 20 megs limit, so make sure that message plus attachment is under that limit.

My second macbook can't see my external drive.

I have the following setup:
-a Macbook that is wirelessly connected to my home network
-Macbook Pro that is wirelessly connected to my home network
-a 500g HD connected directly to my Macbook Pro that I am using for Time Machine.
Initially, I was having issues with my Macbook Pro successfully completing a backup. My Macbook (which is not physically connected to my external HD) had no problems backing up. After a great deal of frustration, I decided that there may be some problems with my HD so I reformated and repartitioned the drive to a single drive with journaling. Fortunately, now my Time Machine works with my Macbook Pro but I'm having major issues with my Macbook.
For some reason, my Macbook can no longer see my Macbook Pro, nor my external hard drives I am using for Time Machine and a second external I was hoping to use to share my iPhoto library between the two computers.
(I'm worried that I've done so much that I may have caused the problems but don't want to undo anything for fear that I'll once again mess things up with the Macbook Pro).
For the Time Machine HD, I've selected SHARE. When I use Time Machine on the Macbook, the drive (which was at one time visible) is not there.
For the new External that I was using for iPhoto, I've Shared, selected Ignore Ownership, and even added my wife's name with Read and Write privledges. But the macbook still can't see either drive.
What is confusing me is that my Macbook can still SHARE the Macbook Pro's screen. Yet when I look at the drive it just says connection failed.
I'm new to Macs so I'm not familiar with setting up. I've just tried to use what I would do with a PC.
ANY help is greatly appreciated.

Welcome to the discussions forum Mightymice.
Networking with Vista is a "bag of hurt" as Steve Jobs might put it, but it can be done.
Is there a "How to" somewhere?
I'd recommend getting this book from David Pogue. He devotes pages and pages to this subject alone. Here is a Google excerpt. Enjoy!

TS4062 I can't see videos I have taken on my ipad either in iCloud or when I sync my ipad to my macbookpro (both are up to date) I can only see photos? The videos are only few seconds long?

I can't see videos i have taken on my ipad in the iCloud all synced as i can see the still photos i have taken but not the videos. The videos are only a few seconds long. I have also tried syncing via USB cable from iPad to my Macbookpro and it wont sync either the photos or the videos in iTunes I have re checked the sync set up in itunes bt still nothing?
Any ideas would be appreciated
Thx
Laredo20

deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Can't See My Second HD

Similar Messages

Maybe you are looking for