Can't see my System Restore Files

My proble is double sided, I backed-up my files to a New SImpleSave External HP Drive, which saved them as .wim files,I NEED to convert them back to their original state. I just  restored those files to a FOLDER on My DESKSTOP (sytem recovery files) which shows 72 g worth of files, But when I go to the folders they appear as EMPTY and I can find my files///what do I do? thank you

daman77 wrote: My proble is double sided, I backed-up my files to a New SImpleSave External HP Drive, which saved them as .wim files,I NEED to convert them back to their original state. I just  restored those files to a FOLDER on My DESKSTOP (sytem recovery files) which shows 72 g worth of files, But when I go to the folders they appear as EMPTY and I can find my files///what do I do? thank you
Hello daman77, You might try taking a look at this  Link  for some information on how to manage .wim files.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

  • How can I find my password for iTunes?  Forgot it and can't see how to restore or change

    How can I find my password for iTunes?  Forgot it and can't see how to restore or change it.  It is not the same as the apple id password - or so my iPhone iTunes says - Help

    I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

  • How can I do a system restore or bring back my Toshiba Sattelite A100 to its factory setting?

    How can I do a system restore or bring back my Toshiba Sattelite A100 to its factory setting? I can't run my cd/dvd rw ( not knowing why it does not read )so I bought an external dvdr. I still have the product recovery cd. I really need help with this. E-mail me at [email protected] 

    dashaa wrote:
    all the tutorials seem to leave out that part
    Apple documentation seems to be providing all steps: OS X Yosemite: Erase and reinstall OS X
    dashaa wrote:
    thank you!!
    Your welcome. I'm happy i could help.

  • Why i can't see table, image, attacth files in meeting request mail.

    Hi, I'm Narongdech
    i have a little question in outlook 2013. Why i can't see table, image, attacth files in meeting request mail. i try make a new meeting request for my partner. but them can't see new mail in the correct format. 
    below,This is a image in my outlook 2007. i try to make this format. Please Help me, and let me know that.
    Thank you.

    Hi Narongdech,
    What’s your Exchange server version? I have tested to send a meeting request to my colleague with a table, a PNG picture and a word attachment in my Outlook 2013 with Exchange 2010 environment. And it can be viewed well.
    Please check whether the issue happens to all Outlook 2013 users or some specific ones. We can close Outlook and send a meeting request with pictures and attachments in OWA to have a test. If the OWA test returns everything is OK, the issue may be related
    to Outlook client. Please run Outlook in safe mode and disable all related mail software to check whether the issue persists.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • After loading Mavericks, I can't see/open attached pdf files

    after loading OS X Mavericks on my MacBook Pro, I can't see/open attached pdf files. I've checked my Security Preferences in Safari and Enable Java Script and Allow Plug-Ins are both selected. Any ideas as to what I need to do???

    I checked as you noted above - this is what comes up
    Adobe Acrobat NPAPI Plug-in, Version 10.1.7
    so I assume (?) that it is installed. 
    I just went into my hydro bill and tried to open the pdf version and, low and behold, it opened.  So somewhere in between when I reinstalled it yesterday (after your suggestion) and just now, it is working!!!
    So thank-you for your help!!.  Cheers.

  • How can i see and cancel hidden files on a external HD?

    How can I see and cancel hidden files on a external HD with macbook pro and Lion?

    Use this AppleScript, saved as an application to toggle hidden files/folders on and off:
    if (do shell script "defaults read com.apple.finder AppleShowAllFiles") is equal to "0" then
              do shell script "defaults write com.apple.finder AppleShowAllFiles 1"
    else
              do shell script "defaults write com.apple.finder AppleShowAllFiles 0"
    end if
    do shell script "killall Finder"

  • How can I see if there are files present in this sourcing staging ftp folder:

    Hi All,
    How can i see if there are files present in the below parth in SAP Sourcing staging dtp folde.
    Upload Directory:usr/fciintegration/abce/materials/upload
    Please help me .
    Thanks
    Peeysuh Ranjan

    It should not be difficult if you have access to the staging server. Just like any other machine, navigate down the folder structure and see if it has files.
    I don't think it is possible to tell from the Sourcing application directly.
    Thanks
    Devesh

  • GB e-filing - can't see business systems

    We are trying to implement GB e-filing using XI.
    Our 4.6C R/3 system is shortly to be upgraded to ECC 6.0 so we are moving from Business Connector to XI.
    The XI system is installed and appears to be running OK. It is the latest version with the latest patches.
    We have a central SLD on our Solution Manager System (v 4.0)
    The XI machine and our QA (upgraded to ECC 6) are in a landscape in the SLD.
    We have got a good way through the e-filing document at
    http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
    but have got stuck at Stage 6 [A] 3. 2. which says
    2. On the Tab Business System Services for A2A, use the F4 help and select the business system on which the SAP HR component 6.00 resides in your system landscape
    We can't see any systems.
    Any idea what needs to be done to see our ERP system?

    Hello Prakhar
    Thanks for advice, really useful!
    Can you please clarify where exactly I can create the Busines Transactions, such as Norman Correction?
    I would like to create Normal Correction via SOLMAN_WORCENTER,so I navigated to Change Management > Common Tasks > New Request for Change (for instance)
    After that I'm getting the list of various roles, such as:
    Select a business role:  AIC_MANAGER-AIC Manager
    IC_AIC_AGENT-Accounting IC Agent
    AUT-PM-Automotive Partner Manager
    CASEWORKER-Case Worker (Social Services)
    .....etc..
    and I don't know which one to use.
    Can I still use "old-fashioned" CRM transactions for this?
    It all has been changed dramatically if you compare it with 7.0
    Thanks,
    123
    Edited by: SOLMAN123 on Nov 23, 2011 7:11 PM

  • HT200307 I can't see those "Track" and "File" buttons on top of the editor.

    I can't see those "Track" and "File" buttons on top of the editor.
    When I double click on a region or push the editor button on the toolbar, it just opens up what is apparently the "Track" section of it and I need to go to the "File" section to normalize! Please help me ASAP
    I'm running the latest version of Logic Pro X (adquired a month ago) on a Retina MacBook Pro running on Mavericks.
    A quick response would be appreciated!

    Logic Pro forum
    https://discussions.apple.com/community/professional_applications/logic_pro
    You may get a quicker respnce in that forum.

  • Can I do a System Restore if I never backed up Time Machine??

    can I do a System Restore if I never backed up my Time Machine???

    If you do not have a backup you cannot restore..

  • My iphone is disabled and I can't restore from PC and home button not working so can't do a system restore. Help!!!

    My phone is disabled and I can't do a system restore from either the PC or phone as need the passcode for PC which I can't remember and the home button is not working on phone so I can't do a reset by pressing home and sleep please help!!!

    Sounds like Recovery mode times out before the download is complete. Try the following method
    How to Install iOS 8.1.3 Update on your iPhone, iPad and iPod touch
    Use the Step 5 update using iTunes instructions but download the iOS 8.2 firmware. Note that if you try to restore to earlier than iOS 8.2 you will only get errors

  • Can I Use Time Machine Restore Files to a New Computer?

    I use Time Machine to backup my data to an external drive. Let's say that my computer crashes and I buy a new computer with Leopard installed.
    Two Questions:
    If I plug my Time Machine drive into the new computer, will I be able to recreate the old files and settings? Or does Time Machine only work to restore information on a specific computer?
    If Time Machine WILL restore the documents onto a new computer, what happens if the first computer is Power PC and the new one is Intel?
    Thanks!
    Message was edited by: Dan D\'Errico

    Dan D'Errico wrote:
    I use Time Machine to backup my data to an external drive. Let's say that my computer crashes and I buy a new computer with Leopard installed.
    Two Questions:
    If I plug my Time Machine drive into the new computer, will I be able to recreate the old files and settings?
    Yes - see my comments below regarding "Migrating User Data From One Mac to Another".
    Or does Time Machine only work to restore information on a specific computer?
    No
    If Time Machine WILL restore the documents onto a new computer, what happens if the first computer is Power PC and the new one is Intel?
    Then you should choose to Migrate your personal data over but NOT Applications. They may likely not be compatible with the new system.
    *_Migrating User Data From One Mac to Another_*
    *Firewire Disk Mode*
    If you have a FireWire cable, you can connect one Mac to the other via FireWire Disk Mode. Then use Migration Assistant to transfer all of your files and applications over from the older Mac. It should result in a virtually identical setup as your previous Mac. Follow the instructions in this KB article:
    “How to use FireWire target disk mode”
    http://support.apple.com/kb/HT1661
    *Using Time Machine Before Initial Launch of New Mac*
    Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac.
    Start the new Mac and begin the setup process. At some point it will ask you if you would like to Migrate/Import user data from another computer or a Time Machine backup disk. Follow the prompts and select the date of the backup you would like to restore your user data from. Once the migration is complete use Disk Utility to repair any permissions issues.
    *Using Time Machine After Initial Launch of New Mac*
    If you have already created a User Account on the new Mac using a DIFFERENT Username and Password from the old Mac, then do the following:
    Attach the hard disk containing the previous Macs' Time Machine backups to the new computer.
    Go to Applications --> Utilities --> and launch Migration Assistant.
    At the welcome dialogue click "Continue." You may be required to enter your Admin password.
    For Migration Method chose "From a Time Machine backup or other disk".
    Select the hard disk containing the previous Time Machine backups. (Give Migration Assistant some time as it scans the disk for eligible data to migrate.)
    Now select which User Accounts you would like to migrate over.
    However, if you have already created a User Account on the new Mac using the SAME Username and Password as the old Mac, then you will need to do this:
    Create a new User Admin Account on the new Mac with a completely unique name.
    Now, delete the first User Account you created on the new Mac - The one that is identical to the old Mac. (Of course, backup any important files that were created using the new User Account before deleting it.)
    Finally, use Migration Assistant as described above to move the old User Account data over from the Time Machine backups.
    *Full Backup After Restore*
    Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
    Let us know if this was helpful.
    Cheers!

  • System restore - 'file not found' nightmare

    I have a very large collection of classical and jazz music which has required a lot of manual input to get the track info right.
    The music is held on an external hard drive and itunes itself is on my PC hard drive.
    Recently I had to carry out a system restore.
    This deleted all my itunes programmes and library files but created an Old Windows directory into which they were saved.
    So I had to re-install itunes and copied over the library and xml files from the Old Windows directory
    While the music now displays correctly in itunes nothing will play and I just get a 'the original file cannot be found message' for every single track.
    We're talking thousands of tracks here so locating them one by one is not an option - and as they are classical music I need to keep all the track information as in hundreds of cases it had to be entered manually because itunes and other programmes to retrieve data are totally useless for classical music.
    I have no ipod to back up from as the whole point of the exercise is to get my music files on the PC into a shape where they can be sync'd to an ipod without most of them showing as 'unknown'.
    Any suggestions? - the old xml and library files still exist, the mp3s they should refer to have not actually moved as they are on the same external drive - surely there must be a way to do this without locating each individual track?

    Hi, welcome to Apple Discussions.
    Select a track that is currently missing in action and use CTRL-I to *Get Info*. When prompted to try to locate the missing file say no, then look at the Where or Location entry on the Summary tab. Now find the actual file. Compare the two paths. Typically with a rebuild all that will have happened is that your external drive has been assigned a different drive letter from that which it had previously. Ideally all you need to do is to rearrange the drive letters so that each file is restored to its original path and then iTunes will be happy.
    If for some reason that is not possible then I have a script that should be able to reconnect tracks provided they are in a predictable location. You can download the current version of SwitchLinks and test it out on a few tracks first to see if works as expected. If not, let me know what happens and I'll try to update it accordingly.
    tt2

  • Itunes can't see my phones backup file

    Hi, I had to do a reset and restore on my iPhone recently and when i came to restore the backup iTunes could not see the one for my phone that i made prior to the restore (even though it exists in the C:\Users\xx\AppData\Roaming\Apple Computer\MobileSync\Backup file). iTunes can also see the ipad backup and the other backup from another iPhone that are in the folder but not mine. When it restored the phone it made a new backup file and datestamped the existing file. rightly or wrongly i moved the new post restore backup and removed the date stamp suffix of the original backup.

    I had exactly the same problem and couldn't find the answer anywhere. However after playing a bit I found out that my computer name (i.e. Right click on "Computer" and select properties) contained a hypen. I renamed the computer to delete the hypen, restarted and now it syncs wirelessly like a charm!
    Obviously something that apple overlooked which will probably right itself in the next release but should get you up and running fingers crossed!

  • Can't see my iPad pdf files on iTunes

    Since the new update I have a problem. I can see the PDF's in my iPad, but when I connect the iPad to my Mac I cannot see them in iTunes. I can see my old books and PDF's just fine, but when I tried to drop a new PDF file into the book category of my connected iPad via iTunes it doesn't show up on the latter. It shows up on the iPad, but I can't see it in iTunes. Any ideas what could be the problem?
    And is it possible to change the information of the books (Title, author,...) in the new ibooks app on Mac?

    Hello celyne94,
    This error message is typically related to a conflict caused by security software installed on your computer.
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Allen

Maybe you are looking for