Can't see my usb hd in the airport utility

I just got an Airport express that is working great, but I can't hook a USB HD to it. I reformatted the drive and made sure that it is recognized when I plug it into my computer, but when I plug it into the USB port on the Airport and run the Airport Utility nothing shows up in the "Disks" menu. Anything I'm missing? I have cycled the power on the Airport without any success.

Is this a bus-powered drive or does it have its own power supply brick?
If bus-powered, a powered USB hub is needed.

Similar Messages

Why can't I see my Apple TV in the Airport Utility?

Why can't I see my Apple TVs in the Airport Utility?

An AirPort Utility is not intended to configure an Apple TV, so there's no reason for it to discover one.
Use the Apple TV remote to configure it.

How can I see my USB device in the measurement&automation explorer?

I'm trying to use an USB-device with LabView7.0.
I followed the manual "using NI-VISA3.0 to control your USB device" which I found on the NI-webpage.
I generated an .inf file using the VISA driver developement wizard and installed it in the INV folder of my system (I'm using Win2000).
The following problems occured: after I connect my USB device the "add new hardware wizard" pops up and aks for a driver for the new hardware. when I direct it to the folder with the generated .inf file it doesn't accept this file as a driver.
second: the USB device doesn't appear in the measurement&automation explorer. I assume that as long as my device doen't appear there it is not recognized by NI-VISA and the comm
unication from LV wouldn't work?
How can a make my USB device visible in the meas.&aut. explorer?
Regards
Tobias

Tobias,
In the VISA Driver Development Wizard, you are required to specify the Vendor and Product ID. These numbers are what Windows will use to determine whether a specific driver is appropriate for a given device. If these numbers do not match between your device and the Windows driver (INF file) that you generate, you will see the behavior that you describe. Check to make sure that you are using the appropriate values. Also, did you right click on the INF file and install it as directed in step 2.2.2?
Page 5-87 of the VISA Programmer's reference manual specifies how to do a viOpen to a USB device in RAW mode, but you still need the same sorts of Product ID and Mfg ID that you needed for the INF file generation. Furthermore, if you are communicating with
your instrument directly, you will need to know exactly what command set it expects, so make sure you get that from the manufacturer as well. Finally, I want to mention that if this device complies with the USBTMC standard, then none of this is necessary--the steps above are for setting up a RAW USB connection. See this link for information.
Scott

Can I use a USB drive with the Airport extreme (not the new one) for Time Machine?

I thought I heard that using USB drive for Time Machine over wifi will work with the new, tall Airport Extreme, but not with the previous model, which I have. Anybody know for sure?
thanks.

It is not recommended.. Apple says it doesn't work.. for some people it does for others it is unreliable.. do you really want unreliable backups.
See http://pondini.org/TM/Airport.html

My Airport Extreme Can't See My USB Disk

Hi. I have a new airport extreme out of the box, factory fresh. I plugged in my USB hard drive and cannot see it displayed in the Airport Utility under Disks. I have tried different hard drives, different cables, rebooted the airport, restored it to default settings but still no joy.
The first disk I tried was a factory fresh Buffalo formatted to NTFS. Then I tried my USB disk that was the Time Machine backup on my old Mac that I had connected via a USB cable. Neither can be seen.
At my wits end....
Thanks for any help

The drive must be formatted in Mac OS Extended (Journaled) or FAT32 to be recognized at the USB port of the AirPort Extreme.
The USB port on the AirPort Extreme is underpowered. For that reason, it is often necessary to use a powered USB hub with a hard drive......even if the hard drive has its own power supply.
If the drive is formatted correctly, and you have a powered USB hub, and the drive will still not appear in AirPort Utility, then it is time to take the AirPort Extreme to an Apple Store or service to have the USB port checked out.
See this discussion for more information and tips:
https://discussions.apple.com/message/20499058#20499058

I can't see my usb devices on my desktop.

i can't see my usb devices on my desktop. i tried to restart and re-plag but it doesn't show up. help?

Welcome to Apple Support Communities
That's normal. You have to set up Finder to show external drives on Desktop.
To do this, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and mark "External disks"

[SCHROOT] Can't see my USB hard drive

Hi
I use an schroot environment to run 32 bit applications on my arch64 system.
All runs well, but I have a problem I don't know how to solve myself.
I can't see my USB harddrives from inside the chroot system, so , for example 32 bit browsers can't save files on my USB hd.
I tried to mount with the "--bind" option the HD :
sudo mount --bind /media/HD /opt/arch32/media/HD
Reading the HD with "ls /opt/arch32/media/HD" works outside the chroot, but then when I try to read the HD with "ls /media/HD" from inside the chroot I get a "PERMISSION DENIED" error.
I don't know what to do. How am I supposed to see my USB hds from inside the chroot system?
Thanks
Marcello

djszapi wrote:Can it be a 32/64 mixing issue? We did sich a thing at the company, but with 32/32 bit os.
I don't know to be honest, it's the first time that I do such a thing (chroot) , and I never tried a 32 on 32 bit chroot system

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

Why can i see only one picture in the illustration windows with iTunes 10.5.1?

why can i see only one picture in the illustration windows since iTunes 10.5.1?

Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
I've developed a quick workaround, and am still hoping Apple will fix this!
Go To Get Info on the tune you want to see secondary artwork for.
Go To the Artwork tab
Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
you end up with a lot of jpgs on the desktop to discard!

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
How do I fix this

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Icannot get my pcs to see the external hard drive when I attatch it to the usb port of the airport extreme. They do recognize a thumb drive but will not see the external hard drive. What do I need to do. The ext hard drive is a "MY PASSPORT" with no pw

I need assistance getting my windows computers to see my external harddrive attached to the airport extreme. It is a my passport. The disk shows on the airport utilitiy but neither of my pcs can see it. If i connect a simple thumb dirve they see it just fine.
What do i need to do to get this to work. There is no password on the external hard drive at the moment. I tried removing it to see if that would work.

There are a number of posts related to access issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

Can't see my usb hd in the airport utility

Similar Messages

Maybe you are looking for