Can't see NAS device connected to BEFW11S4 v2

I have an Iomega StorCenter 250GB NAS drive that works perfectly well when directly connected to a Windows XP SP2 laptop.  When I plug it into my Linksys BEFW11S4 v2 router, I can not connect to it.  All of the right LEDs light up on the router and StorCenter, so I don't think the router/NAS connection is at issue.  Presumably the problem has something to do with the way the router is configured, because as written above, the NAS works fine with a direction connection. 
Other details:
The router has a vanilla configuration with the exception of being WEP-enabled; every other setting has its factory default 
I have a Linksys BEFCMU10 connected to the router via the router's WAN portful
Iomega support wasn't help with the exception of suggesting that I contact Linksys
I'll happily supply any other details that will help troubleshoot this problem. 
Message Edited by davehane on 05-15-200708:47 PM

This is your problem the NAS has an IP: 192.254.12.194
Now the BEFW11s4v2 has an IP of - 192.168.1.1, basically they will not see each other because the IP of the NAS is not in range of the router. do you now how to set a manual IP of the NAS? If you do please change it to 192.168.1.194. Hope this works!

Similar Messages

  • How can i see which devices are connected to my wireless network?

    how can i see which devices are connected to my wireless network?

    Login to your router and view the DHCP clients.

  • Hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???CAn anyone please help me out .... thanks

    hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???

    Hey wajahat86!
    Here is an article that describes this issue and can help you resolve it:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!

    Fire Wire: MBP OS X.4.11 Can't see external devices. PLEASE HELP!
    My MBP will not "see" my new MB or my back-up drive—both connected via a firewire 400 (6 pin) cable. Both running Tiger X.4.11
    I have used this cable to connect my MBP and a TiBook in the past as well as to back-up onto the LaCie e-drive.
    I have run "disk repair" and "permissions" on both machines.
    BTW—"permissions" are regularly out of wack on the MBP. But, the disk is OK according to Disk Utilities.
    I also cannot put the machine to sleep after logging out. Has a hard time shutting down as well. Sometimes I need to force a re-boot.
    Can't run Disk Doctor because I don't have a bootable disk yet. It's coming via snail mail.
    The new MB "sees" the e-drive connected with the same cable.
    I can't transfer my files to the new MB nor can I back up.
    Is it time for a "clean install"? Makes me nervous that I cannot backup before trying anything drastic.
    Can someone please help me?
    Thanks in advance.
    Tek

    Put the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
    I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
    Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa.

  • I can't see my devices on itunes

    I can't see my devices in itunes. The device icon appears during initial plug in, then dissappears. I hate itunes it ***** up time and engery to do the simplest thing.  The device icon should always be present indicating wether or not a device is connected.

    This fix has been tested in Windows 8.1 using iTunes 11.3.0.54
    Plug in your Apple Device via the USB port on your computer
    Open Device Manager
    Navigate to Portable Devices in the list of devices listed
    Right click on your Apple Device
    Select Update Driver Software
    Select Browse My Computer for Driver Software
    In this Window navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    Once you have selected the Drivers folder ensure “Include Subfolders” is selected and click “Next”
    This should then solve your problem, the device should then reconnect to Windows and the Device should appear in iTunes.

  • Can not see the device net Master Interface in my project.

    Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

    Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
    Are you able to hold the C key down when you reboot, to boot off the installation disk?

  • How can i see my device on itunes

    how can i see  my device on itunes

    Start here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • How can I see what devices are linked to my iCloud?

    how can I see what devices are linked to my iCloud?

    You can see which devices are currently set up and/or logged in by signing in at iCloud.com on your computer.  Then click the Settings icon or select your name from the top right, then select iCloud Settings. A list of devices using your account will be displayed.

  • HT201365 Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in

    Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in my pc...?

    Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

  • I can't see my devices in itunes, first I couldn't get my computer to notice my device, now it does but itunes doesn't show devices

    I can't see my devices in itunes, first I couldn't get my computer to notice my device, now it does but itunes doesn't show devices

    Same thing is happening to me, before it wouldnt regognize it at all, it would sync but it would say on my iPhone "this device cannot be charged" and now it wont come up at all.
    But it does work on my laptop, can sync on iTunes and chrages it fine, the problem is my computer

  • I can't see my device in itunes, AMDS keeps crashing.....

    After initialling downloading my music library to itouch I can no longer update it, can't see the device in itunes and AMDS keeps crashing each time I start it.
    I'm on Windows XP....please help..

    Same thing is happening to me, before it wouldnt regognize it at all, it would sync but it would say on my iPhone "this device cannot be charged" and now it wont come up at all.
    But it does work on my laptop, can sync on iTunes and chrages it fine, the problem is my computer

  • Can't see my devices on itunes

    Can't see my devices on itunes

    Hello northernlan,
    I understand that your devices are not recognized by iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Help!!! How can I see what devices are connected to my icloud

    How do I know what devices and computers are linked to my icloud? Used it once at my ex boyfriends house on his computer and I think my photo stream is going to his desktop??? How can I tell and if so disconnect from it?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How can i see what devices are connected to my icloud?

    I want to know if pictues from my mac are on any other devices. How can i see what other devices i have connected to my icloud?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • Where can I see what devices are connected to my Airport Extreme?

    I just switched from a Belkin wireless-g router to the Airport Extreme (802.11n). With my Belkin router, when I entered the address "192.168.2.1", I was taken to a menu where, among other things, I could view all connected devices. How do I do that with my new Airport Extreme? Thanks!

    Hi David, welcome to the discussions!
    You will have to dig a bit for the info, but it is there.
    Open AirPort Utility
    Click on Manual Setup near the bottom of the pane
    Click on the gear shaped Advanced icon at top of the window.
    Click on Logs and Statistics
    Then click Wireless Clients or DHCP Clients to see who is connected.

Maybe you are looking for