Can't see NAS in Finder after upgrade to Yosemite

That's it - before, in Mavericks, my NAS always was visible on the left pane in Finder. Now, it's gone and I can't find a way to access it at all from my MacBook.

I have a Synology NAS, and have exactly the same problem.
At the moment, I have to use Finder's "Connect to Server" option and put in "smb://DiskStation".
Apple needs to fix this one! There is also a thread on this in the Synology Forums:
http://forum.synology.com/enu/viewtopic.php?f=64&t=92006
Paul

Similar Messages

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my wallpaper when I started the upgrade process

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my default wallpaper selected when I started the upgrade process. Can I download the default animated wallpaper of ios 7?
thank you
ps. I'm apologize for my bad english language

A different approach would be to:
1. Delete the contents of the library on the desktop Window 7 computer;
2. Turn off iTunes Match;
3. Copy the contents of the Music folder from the working Windows 7 computer to the desktop Music folder;
4. Import the new contents of the Desktop music folder into the library;
5. Close / restart the iTunes client and confirm that the library has all the Songs as anticipated;
6. Turn on the iTunes Match service and allow it to run to completion.
This is a proven process on my Windows 7 computers and works very well.

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

The powerpoint 2003 file with a swf embeded, can not see and manipulate it after upgrade to Adobe flash 14 !!

I have a powerpoint 2003 file with a swf embeded, which is created by SAP Xcelsius 2008. I can not see and manipulate it after I upgrade to Adobe flash 14 !!
What happen ?
How to solve this problem ?

Please don't post the same question multiple times!

Why can't I see my applications in finder after upgrading to Yosemite?

I upgraded to Yosemite and now my applications do not appear in finder. How do I fix this?

Well, first of all, Safari is located on the dock. That's how I got Safari open. Although I am a new user of Yosemite I've been using mac computers for over 7 years. So, I'm not a complete moron. Yosemite seems to be a bit inconsistent on my computers. In Finder on my mac desktop computer there is, on the left side, the heading "Devices", in which my mac and my macbook pro are listed. Here the macbook is called "Remote Disc". On the macbook the heading "Devices" is not present. Instead there is the heading "Shared". Here I can see the mac listed but, not the macbook. So, the hard drive for the macbook is not listed in Finder, on the macbook. On the macbook I did attempt to locate the applications folder under my user name, which is listed under Favorites. There I find a folder named Applications but, it appears to be empty. When I click on it nothing appears. I have discovered a work-around though. I can locate my Applications folder by clicking on the hard drive icon on the right side of the desk top of the macbook. So, since I have been able to locate the Applications folder there I have decided not to worry about trying to locate it in Finder. If I were still worried about it, would that be enough information for you? Is that precise enough? I was trying to keep it brief. I didn't want to write a novel.

Can't open Finder after Upgrade to Yosemite 10.10

After the Upgrade to Yosemite 10.10 on my MacBook Pro with Retina Display i can't open the Finder and it says it's not reacting. The bar on top when i'm at the Desktop is also gone.
Can somebody help me ?

I had this exact same issue, and I was just able to fix it (at least for now). I'm not an expert by any means, so I can't tell you why my solution worked, but if you follow it and it helps, then great.
First, you'll have to restart your computer and open in Safe Mode. Restart the computer and as soon as you hear the startup noise, press and hold the Shift key. Release it when you see the Apple icon. It will take a little longer to start up.
Then download and install the free software called OnyX.
Once installed, open OnyX and click on the Verifying tab, then click on the Preferences tab. Run the Check button at the bottom. If it tells you that you have any damaged files, double click them on the list, one at a time, and then delete those files.
Then I clicked the Scripts tab, and Executed all three scripts.
Finally, under the Cleaning tab, I clicked on System and executed everything except "CUPS jobs".
I then restarted my computer like it suggested (without opening Safe Mode) and everything was back to normal!
Hope this helps.
Edit

Can't Login With Network Account After Upgrade To Yosemite Server 4

I've been putting off this troubleshooting for a while now, and after trying everything I could find, decided to post.
- After upgrading my server to Yosemite with Server 4, and my MacBook to Yosemite, I can no longer login with any network accounts.
- I was on clean installs of Mavericks before the upgrade.
- I'm using SSL for the OD, with a GoDaddy cert, the same one that was working on Mavericks.
- I've tried removing the laptop's binding using the Users and Groups preferences dialog, which does not remove the laptop's entry from Open Directory, so I manually deleted the record on the server.
- I then choose to Join again, and it looks as though everything goes through, but I still cannot login with a network account. Also, when rejoining, it does not create a binding on the server.
- If I use the Directory Utility->Services->LDAPv3, and add it that way, entering the FQDN and checking Encrypt..., Use for auth and Use for contacts, it asks me for the directory admin username and password, and does in fact create the binding on the server, but I still cannot login. What's strange about that method, is that it forces the use of the IP address of the server, rather than the FQDN, like I entered it, which would of course have problems, because the certificate's common name is the server's FQDN. It does not allow me to change from using the IP address, graying out that field.
- I've also tried destroying the OD and restoring from archive to no avail.
It looks like many users have hit dead ends with this, with some having success by completely formatting and setting up a new iteration of the server, but I will not be doing that. However, I'll be happy to try any other suggestions.
Thanks for your time,
   -- Mike

     Okay, I've finally resolved the issue, thanks to the Apple Enterprise tech support team. I'm thinking they wouldn't mind if I share this information, but I can't guarantee that this will work on your system or, worse yet, degrade your system further. However, that's fairly unlikely, just make sure you have plenty of backups before you begin any troubleshooting session.
     So I was told to perform the following instructions, which I did, line for line. The part about closing Server.app seems a given, but I'm not sure why they want you to open Server.app at the the end (maybe taken out of context from some other instructions?). I did it anyway, but you should be able to begin testing, on a client workstation, right after rekerberizing is complete. I did, however, need to reboot my client, login as local admin, and then binding would proceed, and network users are able to login again. The engineer also let me know to expect an error, something like the following: "2015-03-11 21:58:38 +0000 Error synchronizing removal of attribute draft-krbPrincipalACL from record 72519e4c-7ac7-15e4-bd42-10adb1944cbc: 77013 result: 16 No such attribute" - this is apparently normal, and did in fact happen in my experience.
So here's the fix:
- Quit Server.app (don’t just close the window)
- On the Open Directory Server, execute these Terminal commands:
- sudo mkdir /var/db/openldap/migration/
- sudo touch /var/db/openldap/migration/.rekerberize
- sudo slapconfig -firstboot
- Open Server.app
And that's it. I did nothing else on my OD server, just logged out. Immediately tried binding on my MacBook client, it failed, I rebooted, tried again, it worked quickly, and I'm able to login with network user accounts again.

Webex can no longer connect to meetings after upgrading to Yosemite.

I recently upgraded to Yosemite 10.10.1 and found thereafter that Webex, which is a screen share application used for online meetings, can no longer connect to Webex services using the most current versions of Safari, FireFox and Chrome. Java scripts are enabled, pop ups allowed on all browser and yet the problem persists. Any thoughts on how to resolve this?

There was nothing that I did to make it work--it just started working again in Safari. However, it takes a few minutes after I click on Login and then the meeting comes up in another window behind the one I logged in on. I just tried it in Firefox and it now works there; still does not work in Chrome. All three browsers still have the following message in a black banner at the top: "Your browser version is not supported for use with WebEx and may not provide an optimal experience.To view browsers that support the best WebEx experience, go here." One thing I did do that may have enabled it to work in Firefox was to remove Silverlight, which is a Windows app and I'm not even sure how it got on my computer. I was told that it has a similar plug-in as the WebEx plug-in. I'm still searching for answers.
Robin

Can not minimize window in Safari after upgrade to Yosemite

Since upgrading to this ******** OS Yosemite it has made my DVD player unworkable
Now I can not minimize a window in Safari. Control M or Control H does not work The middle minimize button is greyed out?
Is there a fix for this? Upgrading to Yosemite has been the worse mistake I have made since ditching PC's and buying a Mac 3 years ago.

In addition to Eric's response, if you are in full screen mode you can hover your mouse near the upper left corner and click on the green button (to dismiss full screen mode), then the yellow button (to minimize).
I hope this helps.

I Can't see (browse) my files after upgrading to ML, WTH?

Hey, The files are there and if I know what i'm looking for spotlight will list and when I click the file is there but I can't just look at the Downloads, Documents or any other folder i've created before upgrading because it shows as empty. The space is being utalized from my HD so when I ask for info on a file it shows file size but I can't browse. HELP. Applying for tenure in two weeks and though the upgrade was a great crash fix, I can't actually see anything in my newly stable computer. Is this a display setting bug or is it just me?
<E-mail Edited by Host>

Try deleting the Finder .plist - com.apple.finder.plist
You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Relaunch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

Macbook pro can't see NAS drive since Mavericks upgrade

Equipment:
13" Macbook pro (mid 2010) running Mavericks 10.9.4, Processor 2.4 GHz Intel Core 2 Duo, Memory 16 GB 1067 MHz DDR3, Graphics NVIDIA GeForce 320M 256Mb, Crucial SSD 240Gb, Seagate Goflex Home NAS drive 2TB, Wifi network is BT Infinity.
Since upgrading to Mavericks, my macbook pro cannot see the Goflex Home drive on the network at all. I am confident that the problem lies within Mavericks as the Goflex Home drive can be accessed perfectly on the same network using my older PowerMac, my iPad and my iPhone. Also, the NAS is accessible via the internet through the Seagate Share facility.
Can anyone help me get Mavericks to see my drive?
Any help will be much appreciated.
Thanks.

Thanks Csound1 for your suggestion but I checked that I was on the most up to date version of software. I have been successful though in establishing contact with the NAS by following the steps outlined here:
http://support.seagate.com/kbimg/flash/215555/215555_EN.swf
It means that I have to 'connect with server' through the 'Go' menu in Finder each time now and I would like to know how I can make this happen automatically each time I boot up my MBP.
Thanks.

Can't see the Siri update after upgrading to iOS6 on the new iPad 16 gb wifi only

As said that Siri update would be coming to the new iPad .... I have upgraded the os but can't find the Siri update .. Any help would be appreciated . Thanks

There is no icon.
Siri is accessed by holding the home button down.

Can't boot from Ubuntu partition after upgrading to Yosemite

When i go to Disk Utility the Ubuntu partition appears as it always have, i had installed since Mavericks refind to boot from any partition. Now refind doesn't work and the alt/option key doesn't work either. Does anyone know a way to fix this?

A extensive report already written is in the Ubuntu stacks as
Dual boot Linux and Yosemite
Basically you need to follow http://www.rodsbooks.com/refind/yosemite.html
wherein it explains that Yosemite is using a new LVM bootup from within the Recovery Partitions 10.10.
This messes up REFIT/REFIND tools which have previously installed Partition 1.S
See my current Table below , wherein << are my comments
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)    << old preferred site for REFIT/REFIND tools
2         409640    154061023 Mac OS X HFS+ << main Mac partition
3      154061024    155330559 Mac OS X Boot << Recovery 10.10 , installed by Yosemite update, used to start MAC boot. BUT is not shown by Disk Utility, to prevent its naive deletion which would kill the MAC boot.
4      155330560    156598271 Mac OS X HFS+ << old Recovery 10.9, simply retained
5      157869786    228772129 Unknown << My Ubuntu partition
6      228772130    236765969 Linux Swap << which was shortened by 200 MB to make room for 7)
7      236765970    236974814 Mac OS X HFS+ << installation site of REFIND. Though 4) could have been used, there is a possibility that Apple might have future plans for this small 4) partition.
With 7) created (see detail below), my REFIND install command under MAC, within Downloads/refind-bin-0.8.3/ was:
sudo ./install.sh --alldrivers --ownhfs /dev/disk0s7
There was still required the edit if refind.conf.sample specified in Yosemite.html, which I named refind.conf.edit1
This was copied with:
sudo cp refind.conf.edit1 /Volumes/macefi/System/Library/CoreServices/refind.conf
macefi is my name for the MAC /dev/disk0s7 mount point, equivalent to /dev/sda7 under Linux
CAREFULLY do read Yosemite.html, as the instructions here are too terse by themselves!!!!
There are 2 routes to boot Ubuntu, and then creat 7) with GPARTED
a) If you can access the GRUB shell under an old REFIT/REFIND installation, partitions will be shown by:
grub> ls
Presence of a Linux file system can be confirmed by a command like:
grub> ls (hd0,gpt5)/
Output of
grub > ls (hd0,gpt5)/boot/grub/
should include a grub.cfg file. Then you can boot as usual with
grub > configfile (hd0,gpt5)/boot/grub/grub.cfg
After boot up, start GPARTED
b) Alternatively boot with the Ubuntu install disk, and choose the Demo option
Open a text console, and get admin proviledge with:
$ sudo su
# gparted
Using GPARTED, unmount if necessary any terminal SWAP partition, such as my 6) above
Then shrink the SWAP partition end by a trivial 200 MB,
Create a HFS+ partition in like my 7) for a coming REFIND installation
Note, that a file /etc/fstab contains a SWAP partition specification, which should be edited for automated SWAP start.
# sudo blkid /dev/sda7
will report the SWAP space specs LONG uuid code. This can be copied into memory by dragging the mouse over the uuid
Then SHIFT-CONTROL-C will copy it into memory.   Start an edit with:
$ sudo nano /etc/fstab
delete the old swap uuid, and paste in the replacement with
SHIFT-CONTROl-V
and swap should mount upon reboot, or with:
$ sudo swapon -a
Check with:
$ free
which should report none-zero swap space.

After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone help?

After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!

Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

Can't see NAS in Finder after upgrade to Yosemite

Similar Messages

Maybe you are looking for