Can't see Native Authentication Provide while configuing Load Balance Manag

I am configuring Load Balance Manager in FDM 11.1.1.3. I followed the steps as per Oracle, and am setting my local Windows 2003 default Adminstrator account as the username for everything. Everything worked fine upto the point where I specify the authentication provider. I wanted to use Native Authentication, but when I try to "add" an authentication provider, the only option I have is to add Shared Services, Visual Basic Script Authentication and Visual Basic SSO. Can't figure out why Native authentication is not there.
to be completely honest, I don't care what mode it uses as long as it works. What are the implications of using Native vs Shared Services. Say I choose Shared services, do I have to do anything in shared services as part of the configuration?
I am running Hyperion Planning, Essbase.

When you say "native authentication" are you referring to the shared services native directory or are you expecting to see NTLM, MSAD, or LDAP as available authentication providers?
All authentication is now handled via shared services in 11.1.1.3. You will need to specify the provider as shared services and then add your MSAD or LDAP providers within shared services and provision the users for the FDM application(s).
NTLM is no longer supported and has been removed from the FDM list of providers as well as an available external provider option in shared services.

Similar Messages

HT4623 I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting.

I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting. Any help???

The following may help: http://support.apple.com/kb/TS4268

How can ftp service on non-standard port be load balanced using Cisco ACE.

How can ftp service on non-standard port be load balanced using Cisco ACE.For example ftp service required on tcp 2000 port

Hi Samarjit,
you can do this by specifying the port number in the class map that you create . Please find the below mentioend config guide where you can specify the tcp/udp port , range or ports or even the wild card to match the port.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/administration/guide/mapolcy.html#wp1318826
Regards
Abijith

Help!! Can't see the indicating line while playing in Audition 3.0

Hi all,
It's my first post here.
I now got a problem as the same time I re-installed Windows XP and Audition 3.0 some months ago: I can't see the indicating line (I don't know how to describe it, or moving line?) while playing in Edit View. So I wouldn't know where it play to. Anyone can help? Thanks from nusushika~ XD

Hi mikromidas, thanks for replying~
Yes, I have and AMD X2 3800+ processor.
Do you mean the AMD X2 optimizer patch? I followed your instruction and everything seems good at this time. Thank you very much. XD

ERROR:can't find native registration class while J2EE Engine startup

Hi
Iam trying to integrate a Java Profiler application which contains a native library(namely ProfilerDLL.dll) with the J2EE Server.Here are the steps which i had followed
1. Added the following Java option through the config tool of WebAS.<b> -XrunProfilerDLL</b>.
2.Restarted the server.
Server does not starup and throws a error with exit
code -1 .
Here is the log
JStartupIReadSection: read node properties [ID7217950]
-> node name       : server0
-> node type       : server
-> java path       : C:\j2sdk1.4.2_04
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djava.library.path=/usr/sap/J2E/JC00/j2ee/os_libs -XX:NewSize=32m -XX:MaxNewSize=64m -XX:NewRatio=3 -XX:+DisableExplicitGC -XX:MaxPermSize=128m -XrunProfilerDLL:1 -Xbootclasspath/a:jakarta-regexp.jar;profiler_trace.jar;commons-lang.jar -D__PROFILER_PACKAGE_FILTER=__A__com.sap.engine.boot.Start;__M__sun.;__M__com.sun.;__M__java.;__M__javax.; -D__PROFILER_TIMING_METHOD=1 -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
-> java vm version : 1.4.2_04-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type    : server
-> java vm cpu     : x86
-> heap size       : 256M
-> init heap size : 128M
-> root path       : C:\usr\sap\J2E\JC00\j2ee\cluster\server0
-> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path    : C:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class      : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters      :
-> debuggable      : no
-> debug mode      : no
-> debug port      : 1024
-> shutdown timeout: 120000
[Thr 420] JLaunchISetDebugMode: set debug mode [no]
[Thr 5780] JLaunchIStartFunc: Thread 5780 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Denv.class.path=;C:\D\vim\Intellisense\javaft.jar;C:\j2sdk1.4.2_04\lib\tools.jar
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djava.library.path=/usr/sap/J2E/JC00/j2ee/os_libs
-> arg[ 9]: -XX:NewSize=32m
-> arg[ 10]: -XX:MaxNewSize=64m
-> arg[ 11]: -XX:NewRatio=3
-> arg[ 12]: -XX:+DisableExplicitGC
-> arg[ 13]: -XX:MaxPermSize=128m
-> arg[ 14]: -XrunProfilerDLL:1
-> arg[ 15]: -Xbootclasspath/a:jakarta-regexp.jar;profiler_trace.jar;commons-lang.jar
-> arg[ 16]: -D__PROFILER_PACKAGE_FILTER=__A__com.sap.engine.boot.Start;__M__sun.;__M__com.sun.;__M__java.;__M__javax.;
-> arg[ 17]: -D__PROFILER_TIMING_METHOD=1
-> arg[ 18]: -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar
-> arg[ 19]: -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
-> arg[ 20]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
-> arg[ 21]: -Dapplication.home=C:\usr\sap\J2E\JC00\j2ee\os_libs
-> arg[ 22]: -Djava.class.path=C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 23]: -Djava.library.path=C:\j2sdk1.4.2_04\jre\bin\server;C:\j2sdk1.4.2_04\jre\bin;C:\j2sdk1.4.2_04\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\PROGRA1\SECUDE\SECUDE1;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;c:\progra~1\ixos\bin;C:\j2sdk1.4.2_04\bin;C:\j2sdk1.4.2_04\jre\bin\server;C:\j2sdk1.4.2_04\lib\tools.jar;C:\Program Files\JProbe Profiler 5.2.1\bin;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\sherlok;C:\cygwin\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\JVMStatAnalysis\jvmstat\bat;;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> arg[ 24]: -Dmemory.manager=256M
-> arg[ 25]: -Xmx256M
-> arg[ 26]: -Xms128M
-> arg[ 27]: -DLoadBalanceRestricted=no
-> arg[ 28]: -Djstartup.mode=JCONTROL
-> arg[ 29]: -Djstartup.ownProcessId=1740
-> arg[ 30]: -Djstartup.ownHardwareId=I1361390454
-> arg[ 31]: -Djstartup.whoami=server
-> arg[ 32]: -Djstartup.debuggable=no
-> arg[ 33]: -DSAPINFO=J2E_00_server
-> arg[ 34]: -DSAPSTARTUP=1
-> arg[ 35]: -DSAPSYSTEM=00
-> arg[ 36]: -DSAPSYSTEMNAME=J2E
-> arg[ 37]: -DSAPMYNAME=INLD50035793_J2E_00
-> arg[ 38]: -DSAPDBHOST=
-> arg[ 39]: -Dj2ee.dbhost=INLD50035793
[Thr 5780] Wed Sep 22 15:30:06 2004
[Thr 5780] JHVM_LoadJavaVM: Java VM created OK.
<u>[Thr 5780] ***ERROR => can't find native registration class [com.sap.bc.proj.jstartup.JStartupNatives] [jhvmxx.c     417]
[Thr 5780] JLaunchCloseProgram: good bye (exitcode=-1)</u>
Any ideas how to fix this problem?
Thanks
S.Shylaja

Btw: I get the warning starting IIS - It seems to me that IIS tries to load Tomcat on-the-fly. The Tomcat load the fails and IIS continues to load successfully.
The beginning of the IIS Event log outputs this:
Apache Jakarta Connector2, Information, Info: [jk_vm_default.c (340)]: vm.detach() ok
Apache Jakarta Connector2, Warning, Error: [jk_worker_jni.c (308)]: Can't find class org/apache/jk/apr/AprImpl
Apache Jakarta Connector2, Information, Info: [jk_worker_jni.c (297)]: Loaded org/apache/jk/apr/TomcatStarter
Apache Jakarta Connector2, None, Debug: [jk_vm_default.c (302)]: vm.attach() allready attached
Apache Jakarta Connector2, Information, Info: [jk_worker_jni.c (252)]: jni.validate() class= org/apache/jk/apr/TomcatStarter
Apache Jakarta Connector2, Information, Info: [jk_vm_default.c (607)]: vm.open2() done
Apache Jakarta Connector2, Information, Info: [jk_vm_default.c (500)]: vm.init(): Jni lib: C:\wwwapps\j2sdk1.4.2_01\jre\bin\client\jvm.dll
/watson

CAN'T SEE THE THUNDER SYMBOL WHILE CHARGING

I can't see the thunder symbol when I charge my BB C 8520. It just happened after I upgraded my software. Please help! It's hard for me to know if it's already fully-charged. How can I bring the symbol back? Thank you so much!!!
Solved!
Go to Solution.

Hi k_legaspi,
Welcome to the BB Community...
That shouldnt be a complex issue as i think...
Try a battery pull restart(pull the battery out when ur BB is ON)...keep it that way for 5 mins n then again reinsert the battery n let ur BB start...now try charging, see if u can see the "thunder" symbol...
with regards
simply abhik...
Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
For BB OS update: http://us.blackberry.com/software/smartphones/update.html
BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

How can I see songs on ipod while using iTunes 7.0.12.6

You used to be able to click on your ipod and manage all your songs on your ipod in the old itunes. Now when I click on the ipode I can't see anything on it. When I click on the music tab all I see are options to sync. Everything is "grayed" out when it comes to playlists, can't select them. And on the summary sheet I cannot select Enable disk use.

If you want to manage the tracks on your iPod directly, you need to set your iPod options in iTunes to manually manage the iPod. See "Loading songs onto iPod manually" in your iTunes Help for more information.
Regards.

I can no see my browser when attempting to load I get a message it is installed how do I fix this?

I can not see my browser on my phone when attempting to load again I get a message already installed. Also I can not locate Safari to load it back on either. Thanks for your help

See if this helps locate your browser...
Reset your Home screen to the default layout:
Choose Settings > General > Reset and tap Reset Home Screen Layout.

How can I support a health check, from a load balancer?

My company has load balancers which use health checks to determine if the end point is available for client traffic. The basic health check is a tcp ping, and will tell you if the device is on the network. The next level of health check is an http request. This request, and the response are static, you can’t create your own version of the request and response. The standard request is this:
     http://host:port/healthcheck/hc.html
The standard response is this:
     “The server is available”
I want to use the load balancer as part of my total deployment. The problem is that I am not seeing how to support this health check request and response in the MDEX engine. What I see is this request
     http://host:port/admin?op=ping
Will return this response
     dgraph <host>: <port> responding at <day month year time>
It is nice that there is a built in ping, but I am not able to make use of it. I am new to Endeca and still poking around. The dgraph process listens on a port set up in <…>/config/script/AppContext.xml
<dgraph id="Dgraph1" host-id="MDEXHost" port="3281">
<properties>
<property name="restartGroup" value="A" />
<property name="updateGroup" value="a" />
</properties>
<log-dir>./logs/dgraphs/Dgraph1</log-dir>
<input-dir>./data/dgraphs/Dgraph1/dgraph_input</input-dir>
<update-dir>./data/dgraphs/Dgraph1/dgraph_input/updates</update-dir>
</dgraph>
(I am not using the default port, as I only have an instance on a shared server and have to worry about port clashing. But that is a different thread.)
In a standard tc Server install I can support this health check by doing this:
* Create a directory named “healthcheck”, in the “webapps” directory.
* Place a file name “hc.html” in that directory, which contains “The server is available”
The one hack which comes to mind is to write a servlet which would be able to be a smart proxy for the load balancer health check. It would pass along any regular traffic to the MDEX engine. But if the request was a health check it would send “admin?op=ping” to the MDEX engine, and for a good response from the engine, create and pass back the correct response to the load balancer.
Ideas, comments, flames, …
Thanks

Hi, we are using following String to test the MDEX ping response but we get the invalid version formation on dgraph.log -
following is on F5
GET /admin?op=ping HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n
Following gets logged on Dgraph.log
WARN 09/05/12 05:30:03.799 UTC (1346823003799) DGRAPH {dgraph} Invalid version format in 'HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n'
Please let me know - if you have any suggestions to solve this issue.
I know that it works from browser and wget from unix with following commands.
wget http://myhost.endeca.com:19000/admin?op=ping - from unix command line
from browser:
http://myhost.endeca.com:19000/admin?op=ping
Thanks,
Ram

Coherence Extend Address-provider for dynamic load balancing

Hi,
I want to have load balancing across my proxies. so, trying to use <address-provider> feature.
Here is my setup,
I have two proxies and many clients.I am configuring both proxy and the client to use load sharing scheme.
There are implemented classes for the interface AddressProvider. So, i am going to use that.
Here is proxy server settings,
<proxy-scheme>
<service-name>ExtendTcpProxyService</service-name>
<thread-count>10</thread-count>
<acceptor-config>
<tcp-acceptor>
<address-provider>
<class-name>com.tangosol.net.RefreshableAddressProvider</class-name>
</address-provider>
</tcp-acceptor>
</acceptor-config>
<autostart>true</autostart>
</proxy-scheme>
I know there is some silly mistake with that,
I am getting error message in the following log,
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.emc.srm.common.daemon.SrmDaemon.start(SrmDaemon.java:59)
... 5 more
Caused by: (Wrapped: Missing or inaccessible constructor "com.tangosol.net.RefreshableAddressProvider()"
<address-provider>
<class-name>com.tangosol.net.RefreshableAddressProvider</class-name>
</address-provider>) java.lang.InstantiationException
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2542)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2426)
at com.tangosol.net.ConfigurableAddressProvider.createAddressProvider(ConfigurableAddressProvider.java:277)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.acceptor.TcpAcceptor.configure(TcpAcceptor.CDB:78)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ProxyService.configure(ProxyService.CDB:67)
at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:6)
at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:1057)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:892)
at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.java:81)
at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheServer.java:250)
at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServer.java:55)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
... 10 more
Caused by: java.lang.InstantiationException
at sun.reflect.InstantiationExceptionConstructorAccessorImpl.newInstance(InstantiationExceptionConstructorAccessorImpl.java:30)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at com.tangosol.util.ClassHelper.newInstance(ClassHelper.java:587)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2501)
... 23 more
Cannot start daemon
First question:
1) without address provider section in the proxy server configuration xml, will it use any default address provider implementation?
2) what's wrong with the proxy server settings xml which causes above error?
Thanks
Prab

Hi LuK,
Sounds like there is no load balancing is happening in my environment.
I didn't use address provider tag since it's mentioned in AddressProvider Interface API that by default it uses ConfigurableAddressProvider implementation.
Here is a xml snippet in remote client cache configuration xml,
<tcp-initiator>
*<remote-addresses>*
*<socket-address>*
*<address>PROXY-A</address>*
*<port>9099</port>*
*</socket-address>*
*<socket-address>*
*<address>PROXY-B</address>*
*<port>9099</port>*
*</socket-address>*
*</remote-addresses>*
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
what i mean by load balancing is,
I will be having lot of web service queries which runs very fast. I would like to see both the proxies serves the web requests.
I am observing, One connection has been made to one proxy when it's starts up and keep hold on to it (no matter whether other proxy is free or not).
is it a bug? or am i doing some mistake?
Thanks
Prab

Error while selecting Load Balancing in JCO creation

While creating JCO i am facing this error.It is working fine with Single server connection,but when i chose Load balancing i error comes out.Please tell me the solution.
I have read couples of forum mentioned you need to start both Portal and ECC.
For you information my Portal and Java are both on diffrrent Box.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=olameccpdvr GROUP=PUBLIC R3NAME=DVR MSSERV=sapmsDVR PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsDVR' unknown TIME Thu Feb 24 12:19:54 201 RELEASE 701 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE nixxhsl.cpp LINE 776 DETAIL NiHsLGetServNo: service name cached as unknown COUNTER 5

Is your backend system configured correctly in your SLD ?
Go to transaction SMMS on your backend system that your are connecting to. Click on Goto=>Parameters=>Display. Look for "server port" value.
This should give you the TCP/IP port for your message server. It could be 3600 or 3601 (36NN - where NN is the instance number).
In your services file, if you made the entry at the end of the file, press Enter (Return) after your entry.
Try restarting your server after making the above changes.
- Shanti

Authentication Error while Configue SOA in JDev 11g TP4

Hi everyone.
I'm trying to configure SOA suite 11g in my local system. I have done the schema creation and already created a App server connection in JDev->Tools-> Java EE Runtime Preferences.
When I start the configue SOA, it failes to start or stop the oc4j instance as below phase:
[echo] Changing oc4j ports with following values:
HTTP Port : 8988 -> 8888
RMI Port : 23891 -> 12401
RMI SSL Port: 24043 -> 24043
JMS Port : 9227 -> 12601
[echo] Create jms queues/topics from new oc4j jms template
[echo] Changing jms.xml to use port : 12601
[echo]
* Configuring SOA Infrastructure. This will take 5-10 minutes. *
* Summary of SOA configuration parameters: *
** Oracle Home = F:\jdeveloper11g\
** Oracle Instance = F:\jdevinstance\system11.1.1.0.22.49.49
** SOA Database = localhost:1521:XE
** SOA Database User = jdev_soainfra
** HTTP Port = 8888
** RMI Port = 12401
** JMS Port = 12601
** Component Type = o.j2ee
** Component Name = embedded-oc4j
** Configure OWSM = false
** Configure SOA Console = true
** Configure B2B UI = false
** Configure XEngine = false
[echo] ==Stopping oc4j standalone...
[exec] Result: 1
[echo] ==Waiting max 240 second(s) for shutdown of URL http://ESFANDIYAR:8888...
BUILD FAILED
F:\jdeveloper11g\install\bpel\build.xml:10: The following error occurred while executing this line:
F:\jdeveloper11g\install\bpel\soa-infra-config.xml:48: The following error occurred while executing this line:
F:\jdeveloper11g\install\bpel\soa-infra-config.xml:89: ***************************************************
* Configuring SOA Infrastructure has FAILED.
* If following log files exists, please check them for possible cause:
* F:\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\install\tmp\soa-infra-java.log
* F:\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\log\startsoa.log
Total time: 4 minutes 23 seconds
I checked the log file and it says it is encountered an authentication error. I'm wondering which user name and password it is referring and where shall I set the correct values. During the app server connection, I have entered the proper value for oc4jadmin/password.
Aug 30, 2008 11:37:00 PM oracle.j2ee.util.AnnotatedLogger logWithThrowable
WARNING: J2EE JNDI-00005
Authentication failed when trying to connect to the server. You need to provide a valid username and password.
Caused by:class javax.naming.AuthenticationException: Not authorized
oracle.oc4j.admin.deploy.cmdline.AdminCommandException:
Failed to connect to the server with deployment URI (deployer:oc4j:ESFANDIYAR:12401). Please refer to the exception trace from server above to identify the cause.
     at oracle.oc4j.admin.deploy.cmdline.AdminCommandBase.execute(AdminCommandBase.java:54)
     at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.executeCommand(Oc4jAdminCmdline.java:107)
     at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.main(Oc4jAdminCmdline.java:71)
Thanks for any help.
Esfand

Hi Heidi,
I tried once again to install a fresh instance of Oracle soa suite 10.1.3.0 and upgraded it to 10.1.3.4 successfully. I did all the JDeveloper 11g installation and configure SOA process all successfully. I can create a connection to OC4J using 12401 RMI port successfully but none of my applications are deployed to server.
This message is repeatedly displaying in messages tab:
Exception returned by remote server: com.evermind.server.rmi.RMIConnectionException: Disconnected: oracle.oc4j.admin.management.shared.SharedModuleType. local class incompatible during deploy ...
The default OC4J RMI port is 23791 but in my installation it is set to 12401 when I checked the Runtime Port option of Oracle Application Server and the connection is fine with this port but applications can not be deployed with this configuration.
I can deploy applications on separate standalone OC4J instance successfully but not able to do it with my SOA application server.
Any comments will be appreciated.
Thanks again
Esfand
Edited by: user3788199 on Sep 8, 2008 6:50 AM

Can't see OS X disk while booted into OS 9

There are a couple of apps I really need to use, that won't run in Classic; they won't go past 9.0.4. I have OS X and the OS 9 stuff on separate physical drives.
The OS X "Startup Disk" pref will let me select the OS 9 system OK, but once there, the OS 9 "Startup Disk" CP doesn't offer the OS X disk as an option.
Only way I've figured out to get back is to physically disconnect the OS 9 disk and power up, but that's a pain.
what do I need to do to get OS 9 to recognize the OS X disk?
Isaac
Blue & White Mac OS X (10.4.6)
Blue & White Mac OS X (10.4.5)

Well, thanks for the advice, at least it confirmed that I wasn't overlooking something stupid.
I gave the problem some more thought, and recalled something I'd been doing with Macs for years, but never tried with OS X.
From time to time, I've needed to have more than one system folder on a given Mac; sometimes it's just being "stored" there, or sometimes for other reasons. Often, I do not want the Mac to know about those system folders. I discovered that I could just move the System file into the Control Panel folder, and the Mac wouldn't recognize it as bootable. Move the System back out, and it's bootable again.
So that's the (awkward) solution. From OS 9.0.4, when I'm ready to boot back into X, I move the OS 9 System file into the CP folder and restart. I get a warning that the Mac may not be bootable, and click OK.
After the reboot, there's a loooong wait while the Mac looks around for something bootable, but eventually it finds the OS X system, and boots to it just fine.
IF YOU TRY THIS, USE CAUTION: I have OS 9 and OS X installed on separate physical disks, so I can always disconnect one if I can't make the Mac stop booting from it. I haven't tried this stunt with a partitioned drive, and I have no idea whether it would work.
Also, next time you want to boot into OS 9, you have to remember to move the System file back out of the CP folder before you select OS 9 and restart.
Isaac
Blue & White Mac OS X (10.4.6)

I can't see my profile picture while playing games

WWhy can't I see my profile picture when connected to Facebook playing games?

Do you by chance have Logitech QuickCam webcam connected to your computer?
You can also try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

How can I see what I write while "write on" is enabled

I want to track what I write on my graphic tablet. When I apply the "Write On" behavior afterwards, all strokes are "written" with the same speed, so it has to be the "live" version of "Write On".
My problem is: When I lift the pen, for example to draw the dot on the "i", I cannot see what I drew before. In the case of the i-Dot this is OK, but when it comes to multiple letters, its a problem. Is there a way to display what I wrote immediately after I lift the pen, so I don't have to write "in darkness"?

Select it in the Finder and choose Get Info from the File menu.
(86668)

Can't see Native Authentication Provide while configuing Load Balance Manag

Similar Messages

Maybe you are looking for