Can't see new hard drive on my Satellite Pro 6100

I have bought a new Toshiba 40GB hard drive for my Satellite Pro 6100.
I have installed it in it's bay but it is not being recognised in the BIOS or when i try to reinstall using the recovery disc!
Would the bios recognise that there is a drive even if it is not formatted?
Am missing something?
Thanks in advance
Neil

It should work !
The drive also should be recognized even it is not formatted...
3 things you can do:
At boot up you can go into bootmenu and check if the drive is being recognized on the 1st controller.
If not check configuration of the drive (master/slave/cable select).
If this does not help check toshiba support website and download the latest bios (probably you already have it, check like mentioned above)
If this does not work your new drive (or worse: your controller) could be faulty. If the orignal drive still works on your laptop, check the 40gb drive in another laptop or PC with adapter to normal ATA-connection.

Similar Messages

Follow up to HD crash - Install disk can't see new Hard Drive !!!

I may have a bigger problem on my hands.
I rebooted with my original install disk of OS X and when it gets to the "choose location" window, it does not see the new hard drive......????
I'm thinking about re-checking connections and/or possibly pull the hard drive out and do an external connection just to verify that it spins.
Not sure how to proceed and/or what to check ?? Suggestions ???

Make sure you chose the right format, and as far as partitioning in concerned, you have to select at least one partition, which will be the entire drive.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

cwhargrave,
have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

Best way to transfer everything on new hard drive for mac book pro

Hi have a mid-2009 macbook pro with 4 GB ram and 250 GB hard drive, which is full now. I just bought 8 GB RAM to speed it up and a new 1 TB hard drive. I am running latest Lion (that I downloaded from mac app store - I have the original install DVD for Snow leopard). What would be the best and cleanest way to transfer everything (OSX, applications, data, files, user preferences, passwords, etc from the old hard drive to the new one)^
1- I heard I can hook the new hard drive via USB and do a clean install of my Snow leopard DVD, then update to Lion via mac app store. Then how do I transfer everything else?
2- I also heard about carbon copy cloner, but somewhere it says there is a file in Lion that this will not copy.
Anybody have any helpfull answers?
thanks
Naniners

My suggestion would be to use Migration Assistant. This program you have in your Utilities folder and once you hook up your old Hard Drive to the new computer via USB or Target Disk mode, it will pretty much direct you on how to do the whole process. If you have any other questions, let me know.
Migration Assistant steps for 10.6xxx
http://support.apple.com/kb/HT4413
Migration Assistant steps for 10.7xxx
http://support.apple.com/kb/HT4889
I've done this many times and it works very well.

Can I start new hard drive set up again?/time machine info missing!

Hi, hoping for some guidance as I think I've made a mistake with my new hard drive set up, and now my time machine hasn't transferred everything over as I've folders missing!
My hard drive packed up & a new 10.6 was installed on my Macbook Pro. Previously running on 10.5.8 which was backed up to time machine 3 week ago. I switched on and went through the 'set up assistant' but when asked 'Would you like to inherit (or reuse) the backup?' I think I chose 'Don't backup now' because I thought I could do my time machine later! I now know I have chosen the hard route!!
Then I tried the 'migrate assistant' - it took 1.5hrs - desktop has screen shots etc as before but I couldn't access thing like 'my pictures' in bridge etc. The dock has LR, PS, Bridge etc as before too. Then I deleted the new admin set up (so I had only my old admin.) I restarted - no change. I then tried 'migration assistant' again but transfered only 'Other files and folders' because when all ticked there wasn't enough room (-81gb)
Now I can go into LR catalog it only has 2 folders (instead of more than 20), and in Bridge I have files & folders, but on accessing them I get 'Items could not be found. It may of been moved or renamed.'
I've looked into erase & install - but I don't have the disc. Maybe I should go back to the shop who installed 10.6? Can I start again so I can transfer from time machine in the set up?
Any advise on how I can get my info back would be greatly appreciated!
Thanks, Heather

I have the same problem, but it is happening with various USB drives including an iphone. If I have any of these connected via a USB hub to the MacBook Pro, they mount and operate fine until I attempt to copy large files to them. Randomly, during large file transfer, the drive will suddenly disappear and I'll get the same error as if I had yanked out the USB cable without unmounting it.
This is happening with:
* A standard (Lacie) powered 500GB USB drive mounted normally.
* A standard (Lacie) powered 500GB USB drive being used as a Time Machine disk (it errors/unmounts during Time Machine backups).
* An iphone 8GB during itunes syncs, only when copying large files (like videos).
I have tried two USB hubs, one powered and one not, and both cause the same problems. If I connect any of these drives/iphone directly to the Mac then they work absolutely fine.
I first thought the (unpowered) USB hub was to blame, but when I started using the powered USB hub and saw the same problems I'm starting to wonder if OS X has a bug with regards to heavy I/O to USB devices connected through hubs...?
Davros: my tip would be to connect the drive directly to the computer (not via USB hub) and see if the problem goes away.

HT2426 Can't see my hard drive on my AirPort Extreme

I'm trying to set up a external HD as a share drive for the first time by connecting it to my Airport Extreme. I can't see my hard disk where it is supppose to show up in Finder under Shared. There's nothing. No Shared, no external HD. Anybody know why? The HD is good, it works when I connect it directly to my imac. Thanks

I'm currently having the same problem.
For a very long time, I've been using my Extreme with a 2TB external WD drive with seperate power supply.
Today I installed two old 2.5" drives ind a RAID1 enclosure, which I want to use for even more redundant back ups (NOT for speed).
But somehow my Extreme fail to see the attached drive.
I've tried ways of powering up and connecting in different stages, but nothing works.
When I unplug the enclosure from the Extreme and connect it directly to my Macbook, there seems to be nothing wrong. Drive shows up and everything seems to be working.
Anybody got a clue?

Hp 6310y can't get new hard drive to load windows 7

model 6310y -- Windows 7 home premium 64 bit
My desktop PC stopped working. I took it to local computer store and they said it was HD. I bought new hard drive and tried to install retail Windows 7 home premium 64 bit OS. I got an error message Code 0x80070002.
I called HP support....they told me I needed their brand of recovery discs because the motherboard or BIOS wouldn't allow me to install Windows 7 on the new replacement HD w/o it being their (HP) discs. So I ordered them...$17
I bought another new HD and tried to install Windows 7 OS with the HP recovery discs. This time got Error Code 0xe0ef000e.
I should mention both times trying to install OS on new replacement HD...it got approx 8 to 12 minutes into installation before getting error messages.
I called HP support....this time was told that the retail version of Windows 7 OS should have worked and that I didn't need the HP brand recovery discs when installing new replacement HD. They offered me to pay $199 and send them my desktop to fix it....all inclusive fix.
Very confused. I have never encountered anything like this before...I've had mulitple hard drives die over the years and have replaced them myself and installed all the software including OS myself w/o any problems like this.
Memory checked out ok when utilizing the diagnostics f9 key .... it did show problems with HD during one of my many diagnostic attempts
Not sure if its a bad motherboard or built in video card ..... not sure how to find out either....since I can't get the PC up and running
It will boot to blue HP screen & most of time won't allow me to get into f10, f9 or esc screens.
Not sure if its worth paying $200 to fix this or go and buy a new one for around the same price.
any suggestions or help is appreciated
thanks
This question was solved.
View Solution.

1) A retail OS should have worked. That particular motherboard's NVidia Sata controller chip had a bad batch. You need to make sure the hard drive is recognized in the BIOS. If not, nothing can be done.
2) Their brand of recovery disks was wrong, and was acknowledged. What about your $17 ??
If you had either a retail OS, or the recovery Disks that you made, these are acceptable.
The HP version when used with a new hard drive require conditioning "CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive".
Here's the list:
FAILED series computer with M2N78LA boards
That series motherboard was installed in many different models of HP computers. It is fraught with problems.
http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-....
Here are the reported models with M2N78LA boards that have failed. This is not the complete list.
a4316f
e9140f
p5210y
p6130y
p6142p
p6157c
p6210f (Voilet)
p6210y
p6214c
p6310y
p6320y
a6720y
m8530f
m9120y
m9350f
m9517c
m9530f
m9840sc
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Can't see external hard drive after error code -36

Hi, was copying iphoto data from an WD My Passport 750GB external hard drive to my MACBook when the system said it could not complete the copy as it had encountered a problem and indicated error code -36. Now I can't see the external drive (or any data) on any computer. I have tried 3 different MACs to no avail. The drive makes a soft beeping noise but then stops but the light stays on.
Any ideas on how I can get access to my data??

Make sure the cable is securely seated on the device side.
If that's not the problem, then either the drive mechanism or the enclosure has failed. If you don't have backups, you'd better hope it's the latter. Remove the mechanism from the enclosure and install it another enclosure. You can buy fairly inexpensive USB docks that a SATA drive drops into with no need for disassembly.
Failing that, your only chance is to send the drive to a recovery service such as Drive Savers. They disassemble the drive mechanism in a clean room and mount the platters in another drive. Cost will be in the 4-5 figure range, and the results are uncertain.
If you don't have backups, you don't have data.

Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201

Can not see TC hard driver using istat pro or activity monitor

I upgraded the firmware of TC to 7.4.1 yesterday, but I found the transfer speed was too slow and I noticed that I can not see the TC condition using istat pro or activity monitor. So I downgraded the firmware to 7.3.2. Now the transfer speed is fine but I still can not see the TC hard driver in the istat pro or activity monitor.(but I can access files in the TC hard driver normally)
Can anyone help?

I couldn't see my TC hard drive in iStat pro until I actually mounted the TC's Airport Disk using the Finder 'Connect to server' dialog. iStat Pro only gives me Used and Free GB for my Airport Disk. My TC is an old 500GB upgraded to 1TB running 7.4.2 firmware.
As to checking the temperature, I'd be interested too. I have a digital thermometer taped to the top surface of the TC and it is reading 46C with an ambient of 17C. The TC sits on top of a cupboard with clear space around, and I am resting it on a spacer which lifts it 12mm clear of the cupboard to give it the best ventilation. The TC has been doing a long (08:00 - 21:00) Time Machine backup today.
Sayling

TS2518 I recently had to get a new hard drive on my MacBook Pro because of a crash. I was able to restore to my latest backup, but now when I need to upload to an application like DropBox, iMovie, and such, it won't acknowledge Aperture. I have Lion OS.

I recently had my hard drive crash on my MacBook Pro (OS Lion 10.7.5). I was able to restore my new hard drive from my latest backup, but since then have been unable to access Aperture Library from another application. When I 'request' an upload --- like to Drop Box, iMovie, or anything --- and it drops down the window for you to choose which library you want to choose from, Aperture is not acknowledged. It will show my iPhoto Library and Photo Booth.
I can export from Aperture to Facebook and Flicker, but not from the other direction. Any ideas on how to resolve this issue?
Thanks,
Brenda

Brenda,
Do you mean, the Media Browser is not showing the Aperture Library? What version of Aperture 3 do you have, and where is your Aperture library stored, on your system drive or an external drive?
For the Aperture Library to be visible in the Media Browser you need to have enabled the generation of previews in the Aperture "Previews" preferences. Do you have the option enabled "Share Previews with iLife and iWorks"? And have you the generation of previews enabled?
One other reason for Aperture not showing in the Media Browser could be a corrupted Aperture library. I suggest you try the "Aperture Library First Aid Tools" and repair your Aperture Library. Start with reapairing permissions, then try the other options, if necessary. See:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Another reason may be a corrupted preferences file; remove your Aperture preferences from your User Library, see Aperture 3: Troubleshooting Basics, the paragraph on removing preferences.
Regards
Léonie

What is the best order to upgrade to Lion after putting in a brand new hard drive in my MacBook Pro? Restore first? or install Lion First?

I have a 2008 macbook pro with brand new 500GB hard drive and 6GB new RAM. My old hard drive is backed up on external drive, via time machine. When the shop put in the new hard drive (there was nothing wrong with old one, it was just stuffed to the brim), they loaded snow leopard from a disk, but I haven't put anything from the old drive back on yet....I haven't even configured my mail and am just reading mail from ipad and phone these days.
Question: Should I install Lion before I restore all the old backed-up stuff, or is it important to have anything, ( like maybe preferences) already on the computer when I download Lion. I want to be selective when restoring from time machine, because my old hard drive had a lot of ancient software and junk on it that had migrated from every computer we've ever owned, and that is many, many.
So, I'm just stuck on the best way to proceed. Also, should I install the latest update for 10.6.8 before I download Lion? I see today that some new updates have become available; java, security, safari, and apple software installer.
Thanks
G.T.

Gaye Thomas wrote:
But I just read your next post, and it sounds like you think I should do the back-up first, or am I missing something. I think you are now recommending that:
1. First I should install Snow Leopard,
2. do the combo update of 10.6.8
3. THEN USE BACKUP to restore what I want to carry over to new drive.
4. Then upgrade to Lion.
I would restore SL and do the Combo 10.6.8 update. Then use your backup to load back in what you want. Then do the upgrade to Lion.
So what made you change your mind?
And, just to say again, the hard drive is completely new. The shop installed 10.6.8 from the installation CD, and I haven't even configured email. I'm only using safari. I just now downloaded 4 updates that software updater recommended. It now tells me it is up to date. Is there any reason to do a 10.6.8 combo updater?
Are you recommending to do the back up BEFORE I install Lion, so that there are some preferences and information about old passwords and certain information that Lion will want to know about? Will it make my life easier to back up BEFORE I install Lion?
What changed my mind was your second post. You don't want to carry over everything to the new drive and the install of Lion. You only want selective things and of course your personal files.
For that I "feel" it best to install SL, Update SL to the most current version, Then selectively restore the parts you want and then install Lion on top of that newest install of SL with the selectively restored parts on the new Hard drive.
That should give you as clean an upgrade as you can get.
Of course you could go a completely different route. Make the Lion install USB, Save all your program Install files you want to be installed in Lion along with your personal files. Then Wipe the drive and install Lion clean. Then RE-Install your programs and copy over your personal files.
That is what I would do as I do not like upgrading to a new OS over the top of an older one. I have never found that to be as clean and it always seems to carry over stuff from the older OS to the new one. But that is me.

Why am I not able to install snow leopard on a new hard drive for my macbook pro, which at one point was upgraded to Lion?

I've just had my hard drive go caput and after purchasing a new one was inclined to install snow leopard but received an error message when attempting to do so.
I did not create a back up or restore file before I decided to upgrade from snow leopard.
I'm wondering why am I not able to simply install snow leopard on a brand new hard drive. What would clue it into me having had ran lion before and why can't I simply delete that kernel or said file. It makes completely no sense to me. I come from a pc world where if I choose to format a hard drive, I can do a clean install of whatever OS I choose. After all I only paid for my laptop as should be able to do with it what I wish.
Any suggestions or insight would be greatly appreciated

1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian

Can't see new hard drive on my Satellite Pro 6100

Similar Messages

Maybe you are looking for