Can't see new Photoshop CC interface

I'm using CC -- checking "about Photoshop " in the file menu confirms that, but I don't see some of the new interface elements in CC.  In particular, I don't see the new layer comp controls.  Any thoughts?

It was a reasonable expectation.
However, there are a few things not available in the 2014 version that are in Photoshop CC 14.x, and not every plug-in is compatible, so Adobe didn't replace the software in place.  They want you to have the ability to drop back and run the older version should you have problems with the new one.
Not everything automatically migrates.  Plug-ins, for example, will need to be installed.  I suggest checking with the makers of your plug-ins for new installers.
My advice:  Keep the old version of Photoshop CC around if you have plenty of disk space.
Some folks, I don't think all, report problems with the communications between external programs (e.g., Lightroom, Bridge) and Photoshop after uninstalling the old version, and it seems to require a reinstall of the new one for them.
See also:  http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#replace
-Noel

Similar Messages

  • Why in SE16 we can not  see New Data Table for standard DSO

    Hi,
    We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not  see New Data Table of Standard DSO.
    Regards,
    Sushant

    Hi Sushant,
    It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
    Sankar Kumar

  • Help! When I set Colunm_header_visible=off(web item), I can't see new line

    Please help!
    When I set COLUMN_HEADER_VISIBLE = OFF for Web Analysis item I can't see new line for input ready form. What should I do to fix this problem?
    Thank you
    Edited by: AlexNK on Jul 9, 2009 10:01 AM

    Please help!
    When I set COLUMN_HEADER_VISIBLE = OFF for Web Analysis item I can't see new line for input ready form. What should I do to fix this problem?
    Thank you
    Edited by: AlexNK on Jul 9, 2009 10:01 AM

  • Can not see new Power Query data sources?

    Hi, 
    New Power Query can connect to three new data sources: Sybase IQ, Exchange, Dynamics CRM Online
    http://office.microsoft.com/en-us/excel-help/whats-new-in-power-bi-ha104149776.aspx
    I just installed the latest Power Query and wanted to connect to CRM Online instance. For some reason I can not see these new data sources, what am I missing?
    Thanks in advance!

    Hmm... I didn't think we had quite released this version yet. It's possible that that website went live before the link to the new download. There should be a blog entry about this on the "Power BI" blog in the very near future.
    At the risk of providing a spoiler :), the CRM Online support is via OData.

  • Can only see New apps in iPad app store

    Seems kind of pointless to search for apps on the iPad app store, when it will only show you the "new" ones. When I choose any category, then click the show all button, I don't get all, just the "new" ones ... never more than about 97 or so. searching the same category in iTunes for just iPad apps will almost always yield far more choices. for example I can only see about 97 utilities for the iPad from my iPad app store, but in iTunes there are 260 choices. They aren't iPhone apps either. Another example, if I show the games category on the iPad I can only see 27 New and Noteworthy apps, and 24 What's hot apps. No more. In iTunes I have an additional option of a subcategory, for example Action, there are 200 games released for iPad since March 31st available in that one category.
    Not sure if I have a preference set wrong, it's just a bug, or if someone just wasn't thinking. Mayabe it's a bandwidth thing, but at least give me the subcategories or let me see the "next" 50.

    Kappy wrote:
    Yes. How else do you access the App Store? I'm not aware that you can do the same thing from the iPad's App Store app. Nevertheless, whatever you browse from the iPad if there's "+" in the price it means the app can be used both on an iPhone and iPad.
    I guess you finally understood the question
    Why should I be forced to use iTunes to see all of the apps? The iPad app store should see everything just like iTunes.. This isn't an iPhone.
    At least the link is some what helpful although quite slow going back and forth to app store to get details.

  • Restore from Time Machine can't see new HD

    I am upgrading my 250gb hard drive to a 320gb WD Scorpion (found here: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136280) so I took out the old hard drive, put in the new one, booted from the leopard install disc, and went to Utilities>Disk Utility. I can see the new drive, I partitioned it using Mac OS Extended (journaled), and called it Macintosh HD. Then I went to Utilities> Restore System from Backup... I selected my external drive with my time machine back ups, and picked the latest one. On the Select a Destination screen, it says "Searching for disks" but never finds my new drive that disc utility can clearly see, so I can not restore my system.
    PLEASE HELP! Why is it not recognizing the drive?

    Hi jonmerlin
    Welcome to Apple Discussions
    Sounds like you have formatted it correctly, but have not set it to the correct Partition Map Scheme.
    While booted from your Install disc, open Disk Utility and select the drive in the left hand column. Then click on the Partition tab and then the Options button, there you'll see several choices. The first "GUID Partition Table" is for Intel-based iMac's or "Apple Partition Map" for PowerPC-based Mac's. Select the choice that is appropriate for the Mac you have, then click OK. You should now be able to format the drive as Mac Os Extended.
    Then follow the instruction in the Restore from your Time Machine backups article:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
    Dennis

  • Zen Nano Plus can't see new so

    I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

    There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

  • Can't See New Type on My Page

    I'm having trouble with DW5.5 on Mac OS 10.6.8. I'm trying to update my resume and when I type in my new info, "Is This How I Look?" I can't see it on my design page, but it shows up on the code page. Here is the code from the top of the page and following is the line of code with the new copy in it. My url is http://www.deborahdavisdesign.com/.
    Thanks for any help.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/basic_page.dwt" codeOutsideHTMLIsLocked="false" -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
    <!-- InstanceBeginEditable name="doctitle" -->
    <title>Resume</title>
    <!-- InstanceEndEditable -->
            <p><span class="subhead">2011</span><br />
                    <span class="show_name">Is This How I Look?<span class="resume_text"></span></span><br />
                    </p>

    Hi, Jtanna. I did the best I could per your instructions. Here is the link to the test page.
    http://deborahdavisdesign.com/resume_Test.html
    I noticed that all of the copy in the resume in Bold Ital does not show up on my Design View, but does in Code View and on the site. When I created this site, I used CSS and assigned a style to all text. Now, when I put in an insertion point in my text in Design View I can see the assigned style. But I cannot select just one word or a phrase, the entire line of copy is selected when I click and drag. And when I am forced to select the entire line of copy, no CSS style shows up then.
    Here is a screen shot showing the missing copy in Design View. If you compare that to the website, you will see that all the Bold Ital heads are missing.
    Not sure if this is a CSS issue, or an upgrade issue, or old code from CS2 messing it up. Thanks SO much for helping me out. Looking forward to getting this figured out.

  • Can't See New Layer Styles In PS Elements V. 6 For Mac

    Can someone tell me why I cannot see new styles after I have installed them in PS Elements V6 for Mac. I have used Elements 4 for Mac for about a year, and I've just recently bought the new version. The book says you install them the same way in V. 6 as I did in V4. But they do not show up in the drop down list.  I use styles a lot in V. 4. Thank you.

    I did just as you said -- deleted both the mediaDatabase.db3 and the thumbdatabase.db3 -- they were not in folders other than 6.0 folder. I'm not sure what you meant by "repair permissions", but it did run through rebuilding itself after I restarted PSE.
    Do you think it might help if I created XML files? I read something about them in the manual, but it sounded so difficult, I was afraid to try it. 
    I really appreciate your help. Thank you.

  • Can't see new portlets in repository

    Hi ,
    after adding a neww portlet (PL/SQL) TO provider , i can not see it although it was compiled succesfully !! it gives the following error in "monitor log detail report" :
    name : wwpro_api_provider.get_portlet_list
    date :01-Aug-01
    information : provider [9441238]: "provider name" LANGUAGE: us Error: PORTLET_EXECUTION_EXCEPTION .
    null

    My portal version is 3.0.9.8.0 upgraded with patch to 3.0.9.8.1.
    My provider is a PL/SQL provider.
    I have a procedure in a package. I have a call to this procedure in my package provider.
    When i go to Administer/Display Portlet repository and refresh the provider, my new portlet doesn't appear in the list.
    The errors i've get in the refresh errors are:
    PROVIDER[685130]: NOTICIAS LANGUAGE: e ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685130]: NOTICIAS LANGUAGE: us ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685161]: UX_PROVIDER_MATERIAS LANGUAGE: us ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685161]: UX_PROVIDER_MATERIAS LANGUAGE: us ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685130]: NOTICIAS LANGUAGE: us ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685130]: NOTICIAS LANGUAGE: e ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685161]: UX_PROVIDER_MATERIAS LANGUAGE: e ERROR: PORTLET_EXECUTION_EXCEPTION
    wwpro_api_provider.get_portlet_list 19-JUN-02 PROVIDER[685161]: UX_PROVIDER_MATERIAS LANGUAGE: e ERROR: PORTLET_EXECUTION_EXCEPTION
    NOticias is my procedure package and UX_PROVIDER_MATERIAS is my package provider

  • After Effects CC - can't see new Cinema 4D features

    I have subscribed to the Creative Cloud for After Effects only. On the Apps page I selected and downloaded After Effects but during this time I realised that I had a trial version of CS6 on my mac so I deleted the folder. Obviously I didn't realise that this would be a problem as I thought that the new version would create its own AE CC folder. So, the Application Manager was telling me that AE is installed and ready but I had no files on my mac. So I re-installed the trial CS6 version and registered it but I cannot see any of the new Cinema 4D features in my version of the software - 11.0.2.11
    Can anyone suggest anything?

    You can't see anything because CC is not available yet. June 17 is the day.
    Mylenium

  • Can't see new Podcasts

    In the iPod app on the iPhone, I can no longer see new podcasts from the "Get More Episodes.." choice for podcasts I listen to.  I can see the new podcast episodes just fine in iTunes for Windows.  This just started happening.  Any Ideas?

    Ok, I just updated to Mavericks 10.9.3, in hopes that this would do something, but I'm still having the same problem. Has anyone else run into this? Really frustrated!!

  • Can't see new Iphone3Gs on Itunes. HELP

    I can't see my new iphone3Gs on itunes. Have tried everything except upgrade to 8.2. When I try to upgrade, I get error message "can't access windows installed service". I have unregistered/ reregistered windows installer, uninstalled/ restalled, cleaned cdrive, shut down, restarted, & still not working. I have even went to windows installer & tried to start manually but won't let me. Can anyone help me?
    Thanks a bunch!!!

    Even though you're getting a different message, the steps from the following document might be of some assistance:
    iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

  • Windows Server 2008r2 - Users somtimes can't see new files in folders unless a new file is created.

    Hello Folks!
    My users sometimes have a problem that user A sometimes can't see a file created or copied by user B to a directory within a share they can both access. Both are within the same group which grants them Full Access on the share, settings for permissions are
    correctly set to be applied on directories, subdirectories and files.. Confusingly, this can be fixed when user A creates some kind of file (empty .txt, for example); the "missing" files will suddenly appear.
    Windows Server 2008r2, DC
    Windows File Server 2008r2, shares and files are located here.
    ABENUM activated, needed for several folders.
    The Domain-Admin Account is able to see all the files all the time.
    Anybody got an idea what I could check?
    Thank you very much!
    Kind regards,
    Boris

    Hi,
    When you use user A access the shared folder, did you do the refresh to check the result?
    If the issue persists, please try to install this hotfix:
    http://support.microsoft.com/kb/2769790/en-us
    Regards.
    Vivian Wang

  • Why I can not see new contact that I add on my iphone on my pc?

    Hi
    when I add some contact on my iphone ,I can't see that on my icloud when i sign in on my pc.but vise versa is possible.

    Hello pezh69,
    We've an article that can help get your iCloud contacts working correctly.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    Cheers,
    Allen

Maybe you are looking for

  • ITunes 6.1 will not launch

    After upgrading from iTunes 4 to 6, iTunes will not launch at all. Neither will the new version of Quicktime 7 that I installed at the same time. After clicking on the iTunes icon in the dock, the icon bounces once, but the application will not launc

  • Tabel name for PO and Invoice combination

    Hi, Can any one help me, which table we can use to find whether the invoce complete or not for the list of PO's or GR's. If there is no standard table, then advice me how to see the list of 100 po's which have completed invoice or not? Thanks, Saran

  • Can't sync "Photos from iPhoto selected albums"

    I used to be able to see all my iPhoto albums through the iTunes sync to get them on my iPhone. Now I can't see them and that option seems not to be available. I'd really like to just be able to sync some albums but not all and this way I can make a

  • Employment Offer Letters generated in SAP

    Good Afternoon! I'm trying to figure out the BEST way to generate Employment Offer Letters in SAP. I have been reading online and it seems that there are many ways to accomplish this. I've read: SO10 - maintain letter format SMARTFORMS PB60 - Generat

  • Installing on Standalone Application Server

    Hi, Assuming an Oracle Database is installed on 1 server, and OBIEE on another. Is it necessary to install an Oracle Database Client on the OBIEE server - or does OBIEE come with it's own client? Thanks