Can't see one side of raid

Long story short - was in the middle of transferring a lot of data from one side of the raid to the other. Came back and transfer was stopped, so I restarted our server. Server would not start up, so did a fresh install. Server still will not start up if i have the fibre cable plugged in on the side I was copying from, but will start up if i have the cable to the side i was copying to plugged in. If I turn off the raid the server starts up. Turned on the raid with the server on, and i can see the one side i was copying to, but not the side was copying from. The process fsck_hfs is running at 99%, and has been for a while. What can i do to see my other side of the raid?

You were absolutely misinformed. Use journaling...
it doesn't perceptibly reduce performance, and it has
a ton of advantages.
Who gave you that advice? Argh.
You advised me in a post to use journaling. I posted the question because when I set up my RAID, the AJA Io box I use for video with FCP said not to use journaling. The rationale was it can cause audio and video synch problems. I guess that is the decreased performance they speak of. This might have been stated in FCP materials as well. Not sure.

Similar Messages

How can I see one mac from another mac?

I have two macs, an imac at home and a MBPro.
If I have them both at home, how can I see one Mac´s hard drive from another?
Is this possible? with back to my mac??
thanks
J

Do you have a home network?
Personal File Sharing: You can connect Macs on a local network with Tiger’s Personal File Sharing, which allows you to mount folders from the sharing Mac on the master Mac—note that the slave Macs do the sharing; the master Mac doesn’t have to. To turn on Personal File Sharing on the slave Mac, do this:
Open System Preferences.
In the System Preferences window, click Sharing.
In the Sharing pane, click Services.
In the Select a Service to Change Its Settings list, select the Personal File Sharing checkbox.
Now that the slave Mac has sharing turned on, you can mount it on the master Mac’s Desktop:
In the Finder, choose Go -> Network.
In the Network window, select the sharing Mac.
Click Connect.
In the Connect to Server window, click Registered User, enter the user account name and password for the sharing Mac, and then click Connect.
In the window that appears, select the volume that contains the folder you want to sync with, and then click OK.
LN

I can only see one photo at a time

I use to be able to see a thumbnail of all my photos. Now for some reason I can only see one photo at at a time. I have to use the scroll bar to go up and down. It is so frustrating. Please help.

Welcome to the Apple Discussions.
In the lower right corner of the iPhoto window is a slider. Move it to the left. Does that work?
Regards.

I had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?

My kids had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?
My daughter set up a game centre on her ipad. My son, on his ipad used the same game centre log in. He then set up his own game of clash of clans. After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad. Both were using the Clash of Clans successfully on their own ipads using the same game centre log in.
One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
Please let me know if this can be resolved.
We wish to delete my daughters Clash of Clans - as she does not use it at all. We would like to regain access to my sons.
My son can visit his Clash of Clans - his clan name is 'The Big Boys' He has a shield that is blue with a yellow lightning from top right to bottom left. His name is Fat Poo (I know ridiculous).
If you can help us or advise us what to do we would make my son very happy
thanks

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed.

When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed. Iphoto '08 has worked perfectly for years. Suddenly it's balky~

Have you tried moving the thumbnail size slider at the botton on the screen?
LN

HT5517 I cannot see my Apple TV. I have 2 of them and can only see one. Ideas?

I cannot see my Apple TV with airplay. I have 2 of them and can only see one. Ideas?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device.

I have 2 libraries in iPhoto 09 but I can only see one in apple tv, the last one I viewed in I iPhoto why ?

I have 2 libraries in iPhoto 09 but I can only see one in apple tv, the last one I viewed in I iPhoto why ?

iTunes sees what iPhoto sees, iPhoto only sees one library at a time.
Either merge your libraries or upload content from one of your libraries to a service such as Flickr and use the Flickr feature on the Apple TV.

The current version of Firefox moves the tabs. Now the focus moves off the end of the row. I think this runs counter to the point of having tabs, if you can only see one at a time. How do I fix this

The tabs bar on 3.6 Firefox now focuses on the last tab in the row. This means that I can only effectively see one tab, unless I use the arrow button to scroll back through all the tabs. I am used to scrolling some, when there are a dozen tabs open, but How do I make the tab bar static, they way it used to be, so it stands still when I click on the last tab in the row.??

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

How do restore the podcasts, audiobooks, etc., in the itunes 12 sidebar? I can only see one at a time. grrr.

I've updated to iTunes 12.0.1.26, and the sidebar library list has disappeared. It looks like all I can see is one item at a time in the list. Either Music OR Podcasts OR Audiobooks, but not all of them as a list. This is so frustrating. I don't want to see one thing at a time, I want to see everything I have.
Is there any way to restore it to the previous view?

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

I can only see one parent tab from the 2 level Tabs

Hello,
I have some pages, lets say page A, B, C, D.
Now I have a standard tab-set for the pages A and B, its named S1 (and has tabs for the page A and B).
I have another tab-set for the pages C and D, this is named S2 (and has tabs for the page C and D).
Now I have a parent tab to select the standard tab-set S1, this is named P1.
And I have another parent tab to select tab-set S2, this is named P2.
I can now only see one parent tab (P1 or P2), but I cant change from P1 to P2. The standard tabs are working good to select between A and B (or C and D).
As a picture, I see my tabs like this:
_____________P1
A__B
or
_____________P2
C__D
but I want to have:
___________P2 P1
A__B
or
___________P2 P1
C__D
Can anyone help me?
Regards,
Mark

Hm, interesting. I found out that the parent tabsets work both ways:
1) You need to tell the parent tabset for which page it is current
2) you need to tell the page which parent tabset to use

Brand New RD240 ThinkServer can not see the LSI 8708EM2 RAID Controller During Bootup

I have a brand new out the box RD240 ThinkServer that can not see the LSI 8708EM2 RAD Controller it came with. This RAID controller simply does not want to function. This RAID Cntroller does not show up during the boot up and I even tried putting in a different slot in the riser card, thinkn maybe it was a bad PCI-e slot, but made no difference. Also the Lenovo Easy Setup software does not find this controller either. So I'm wondering if there is an issue with the RAID Controller or is it a bad Riser card? Does anyone have any idea's on what can be done or what I may be missing?

For a list of Warranty Support contact numbers, please visit:
http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613
In the U.S. you can call: 1-800-426-7378

*** Can't see one of the iMacs on my local network

I just bought a new MBP and started it up. Most of the computers on my local network are showing up as shared computers, but my iMac 27" is nowhere to be found, meaning I can't access the computer remotely and grab a file from it. Is this a setting I need to check on my new MBP or the iMac? If it's a setting, can you suggest how I make the change, so it turns up?
Thanks in advance.

You need to enable the sharing on the iMac -- the one you can't see.
System Preferences > Sharing would be the place to do it. Compare the
current settings with one of the ones you can see.
Dave

JSplitPane: how can I close one side of the jsplitpane?

Hi!
I have a jsplitpane component on my frame. I want to close one side of the jsplitpane when my program loads. And after some time I want to open it back..
Do you happen to know how can I do that?

Either you have not read the complete thread or you have not followed instructions correctly. Instead of adding HierarchyListener on JSpliPane, you are playing with divider before realization of split pane on screen.
Here is modified code [This works 100%]:
import java.awt.*;
import java.awt.event.HierarchyEvent;
import java.awt.event.HierarchyListener;
import javax.swing.*;
import javax.swing.plaf.basic.*;
public class MySplit {
    private static void createAndShowGUI() {
        JFrame frame = new JFrame();
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        final JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,
                new JButton("first"),
                new JButton("second"));
        splitPane.setOneTouchExpandable(true);
        splitPane.setDividerLocation(150);
        splitPane.setPreferredSize(new Dimension(400, 400));
        splitPane.addHierarchyListener(new HierarchyListener() {
            public void hierarchyChanged(HierarchyEvent e) {
                if ((e.getChangeFlags() & HierarchyEvent.SHOWING_CHANGED) != 0) {
                    BasicSplitPaneUI ui = (BasicSplitPaneUI) splitPane.getUI();
                    BasicSplitPaneDivider divider = ui.getDivider();
                    JButton button = (JButton) divider.getComponent(1);
                    button.doClick();
        BasicSplitPaneUI ui = (BasicSplitPaneUI) splitPane.getUI();
        BasicSplitPaneDivider divider = ui.getDivider();
        JButton button = (JButton) divider.getComponent(1);
        button.doClick();*/
        frame.getContentPane().add(splitPane);
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}Thanks,
Mrityunjoy

When panning full left and right in logic pro 9, how can i stop one side from bleeding into the other?

I'm creating a Click track for live performance. I Have 3 audio tracks panned full left (-64) and a Click track panned full right (63) but when I play the track they bleed into each other. If anyone knows a way around this that'd be great

Eddie,
I just ran a test on my G5 Logic system (Logic 9.02) with an internal RME PCI 8in/8out Audio Card and I get perfect separation bouncing to a stereo audio file using standard panning. Click on one side and a couple of crunchy guitars on the other. Each side is completely separate.
So, it seems to point to your hardware unless you have some other audio routing that we've missed.
I'm re-doing my setup so I may try a couple of other tests as I go along.
pancenter-

Can not print one side hp8600 printer

my printer hp 8600 pro is set for duplex printing. I want to change it to one sided printer. How do I do this

Hi bubbiemarilyn,
Welcome to the HP Support forums. I understand that you would like to print one-side documents using your Officejet Pro 8600.
The print settings are controlled by the software that you are using to send the print job, for example Microsoft Word, TextEditor, Notepad, or LibreOffice Calc, etc. When you choose to print, you should have the option to print one-sided only.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can't see one side of raid

Similar Messages

Maybe you are looking for