Can't see process flow locations in control center

Hi there
We have process flows which pointing to process flow locations. Can see these locations in Design Center but when try delopy the process flows can't since the process flow locations are not visible.
How do you make these locations visible in the Control Center.
Many Thanks

Hi there
found out how to do this - double-click the control center and see the various locations it can see on the right hand side - the process flow ones were on the left - simply added them to right and can now see in control center and deploy.
Many Thanks

Similar Messages

  • Can't see airdrop icon on my Control Center

    I have iphone 5s, latest iOS 8.3
    when I open the control center, the Airdrop button/icon is missing.
    what ever  i did, i can't find a place in the setting when i can turn it on?
    is there any sujestion or solution?

    The iPhoto for iOS forum is here
    https://discussions.apple.com/community/app_store/iphoto_for_ios
    Regards
    TD

  • How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on?

    How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on? I can see my macbook but I cant see the last location of my ipod touch. I lost it a few weeks ago and figured it would show up. But it has not and I need it again for my job. Please help.

    There is nothing you can do now. There are apps available from the app store that would give you that information if installed before it was lost/stolen.

  • Error registering Process Flow Location

    Hi
    I've installed OWB 9.0.4 and successfully registered
    Process Flow Location.
    Then i've added russian lang to Oracle Workflow Repository
    After that when i try to register Process Flow Location
    i get error: RTC-5327 Schema OWF_MGR does not contain an
    Oracle Workflow Repository.
    But i still able to deploy Process Flow Packages
    using earlier created Process Flow Location.
    Thanks

    Vasily,
    This sounds like the known bug 2836447: OWB REPORTS OWF REPOS NOT INSTALLED IF MULTIPLE LANGUAGES ENABLED. The bug was fixed in 9.2 and also should be in the next 9.0.4 patch (9.0.4.11).
    The workaround for now is to run the following in Workflow Schema (owf_mgr):
    update
    WF_RESOURCES
    set
    NAME = NAME || '_' || LANGUAGE
    where
    TYPE = 'WFTKN' and
    NAME = 'WF_VERSION' and
    LANGUAGE <> 'US';
    commit;
    The following removes the workaround and restores the WF_RESOURCES table to their original state. This should be applied when the fixed OWB client has been installed.
    update
    WF_RESOURCES
    set
    NAME = 'WF_VERSION'
    where
    TYPE = 'WFTKN' and
    NAME LIKE 'WF_VERSION_%' and
    LANGUAGE <> 'US';
    commit;
    Nikolai

  • Assigning oracle location to control center

    Is there any OMB statement which will assign oracle location to control center in 11G?
    I know it can be manually done.Please proivde me the OMB statement so that the data location appears in the right hand side edit control center tab.
    Thanks in advance.

    change the $values
    OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES \
    (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, \
    SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE', \
    '$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME',\
    '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', \
    '$DATA_LOCATION_USER','$DATA_LOCATION_PASS')

  • Can't see the bottom of my notification center with IOS7 on iPhone 5

    Can't see the bottom of my notification center with IOS7 on iPhone 5.

    hello ovidelu2006, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Can't see multiple spaces from mission control

    I have six spaces open, but when I enter mission control, I don't see the 6 windows up top; they are invisible. If I click in the general location I'll get to the space, but I can't see any images of the six spaces which are peppered with apps. Its blank up top. Need a fix. Thanks

    Exact same problem. Had this on my Macbook Pro and then my iMac. On the iMac I only get the 'correct' Mission Control display on a screen that is not 'desktop 1'.
    But the Macbook Pro refuses to show it all. I get the same response as the poster above - invisible thumbnails that work when clicked.
    Any help would be great.

  • I can't see Cover Flow

    When I try to see cover flow in iTunes, it says that it cant. Could someone tell me what is wrong? My information is in the green on the bottom.
    HP   Windows 2000   iPod nano (1st Gen.) 2GB, iPod Radio Remote, iTunes 7.0.1.8

    OBGYNDR
    With iPhoto 7 the old iPhoto Library Folder has become a Unix Style Package folder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    All of these are safer and fster than surfing the iPhoto Library Folder.
    Regards
    TD

  • Can't See All Windows in Mission Control

    My favorite feature on the mac has always been the ability to see all open windows with a simple click (F3 on my keyboard). I often have multiple word documents and multiple pdf files open, as well as two or three different browser windows, several image files, and who knows what else. It is very common for me to have 10-20 open windows and it was always a huge help to be able to see them all at once, with filenames that would pop up when hovering with the mouse. This feature made it incredibly easy to move from file to file and truly see everything on the desktop at once.
    As far as I can tell, this is no longer possible with Lion and Mission Control. Now if I have multiple windows open in a single application and enter Mission Control I see them tiled over one another, without filenames displayed for any. Sure, I can see all the applications I have open, but what good is that if I can't see which files I have? It's making it very difficult to work effectively-- basically I have to minimize each window one by one until I find the one I want.
    Am I missing something? Can anyone using Lion tell me how to see a graphic representation of ALL open windows, with filenames? Like I could in the good old days? Or is there something like a "see all open files" ability in Finder?
    Thanks!

    I know what you mean - it was nice to see all the windows.
    Tell Apple here:  Apple - Mac OS X - Feedback
    To mitigate this problem there is "App expose" which lets you see all open windows for any given application.
    And, in Mission Control you can spread a given application's windows a little further apart or you can preview any given window within Mission Control.
    How you do all that stuff depends on how you've configured mouse, keyboard and trackpad. For example, on my trackpad, to spread MC windows a bit I slide two fingers up (with cursor over the group of windows). To preview a given window, I put the cursor over the window and hit the space bar. For me, App expose can be activated by 4 fingers down for the frontmost app, and four fingers down with the cursor over the chosen app in the dock.
    http://support.apple.com/kb/HT4689
    charlie

  • Writer can't see projects in Robo Version Control - no error messages

    Background:
    Robo Version Control 3.1
    RoboHelp 8 (same issue happened with 7)
    Issue:
    We are having trouble with our source control, and I wasn't able to find an answer on this forum or on Google.
    From time to time, when a writer opens RoboSource Control Explorer, they can't see any projects. They're not getting error messages, they seem to connect to the DB, but the left pane is simply empty (they don't see the root folder or anything else). We recently upgraded to RoboHelp 8, but this has happened on RoboHelp 7 too. Source control does work - for example, if they open their local version of a version controlled project, they can get the latest version of files, check in, check out and so on. They simply can't use RSC Explorer, so they can't Get projects they don't have on their HDDs already.
    In the meantime, Source Control works just fine for the rest of the team, so I'm guessing it's a problem with some local settings. (The writer who is having trouble now can't get it working on her machine with her personal user or the admin user. At the same time, I can use the admin user just fine from my machine.)
    This problem always solved itself after a while, but it's getting a bit annoying and I'm hoping someone knows why this is happening.

    In general, manually moving files around inside the store like this should be discouraged.
    reconstruct is telling you something is wrong:
    ERROR: Inconsistent information: 0 idx records   41 messages   0 expunged
    Reconstructing...
    cannot retrieve message uid 590
    cannot retrieve message uid 807
    cannot retrieve message uid 911
    cannot retrieve message uid 915
    cannot retrieve message uid 1198
    cannot retrieve message uid 1286The first line is to be expected based on what you have done. The store.idx indicates there are no messages in the folder. But it found 41 .msg files. So it is going to rebuild store.idx to fix that.
    But then there is some problem with accessing the .msg files. Possibilities would include:
    - wrong ownership/permissions?
    - the .msg file being in the wrong NN subdir ??
    If those guesses do not lead to anything, try truss on the reconstruct command to see what happens when reconstruct tries to open those files.

  • Can we run process-flow from outside OWB

    Hi All,
    I am scheduling my process-flows daily in night. If any process-flow fails, they will rectify the problems and they want to run the process flow manually, outside own, like SQL.
    Regards,
    Kumar.

    Hi Detlef,
    I tried to execute the following, I dint get any response and the sqlplus closed automatically. When I saw the execution details no executing had taken palce. And even I tried to execute the command by commenting the exit in the script.
    sqlplus RA_OWB1/RA_OWB1@RADEV1 @C:\OraHome_1\owb\rtp\sql\sqlplus_exec_template.sql RA_OWB1 PlatformSchema ProcessFlow SAI_PF "," ","
    Is there any external (oracle function), so that I can pass any number of Process-flows as parameters for execution. Client will create a form with a list of check boxes and execute button. when the user selects the check boxes according to his rerquirements and click execute. then all the process-flows should run.
    Regards,
    Kumar.

  • Can you help me?? How can i see tha last location??

    someone stole my iphone
    i put removed en mobile me to cancel the last place seen
    i m waiting to the appear again
    But how i can see the last location?
    tx

    You need to contact Apple directly.
    My iphone was taken by a pickpocket in Paris and I receive a message that it has been found.
    Where your iphone was stolen?

  • Target location vs control center

    Hi,
    We installed OWB10gR2. In R2 we have control Center Manager to deploy the objects. We can create different control centers in connection explorer. In project explorer configuration we can set which control center is deafult one. Up to that we did. Here my problem is we have one target location. We want to register this target location with different control centers. How it is possible? I mean same location should be available in different schemas. Is it possibles? What is I know is once we register one location with one schema we can't register with another schema right? Or is it possible in R2? Please can you clarify my doubt.
    Thanks

    Hi,
    You question is basically - is it possible to register one single location to more than one control centers ?
    I had tried this earlier, but could not succeed as the schema name and password fields are grayed out once the location is registered with a control center.
    Best possible way is ( the thing we do ) , create mulitple locations for deploying the same code to multiple locations. Configure the module to the location under the Project Configuration, and thats it.
    Regards
    -AP

  • Can you and if so how can you choose what's in the control center?

    Switch airplane mode with something else

    There are no settings for the Control Center. What you see is what you get.

  • Can´t see warrenty information in Lenovo Solution Center

    Hello
    I try to post my issue here because I can´t find a place for the Lenovo IdeaPad g series laptops in the Lenovo forum.
    I have installed the latest version of Lenovo Solution Center but when I go to Support and Warranty it just say Not available at enddate and type.
    I don´t know whats wrong. If I go to lenovo.com - Support - Warrenty and Services - Check warrenty status - then I use my serial number and machine type and click Submit and then I can see my startdate and enddate with no problem.
    The problem is I can´t see my warrenty information in Lenovo Solution Center.

    Hi LVT1989,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the exact warranty information is not displayed in your computer, below is the link with the information for what this issue has occurred.
    Lenovo Solution Center is not displaying - System Warranty information
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for